Table of Contents
Advertisement
6.
Remove the access panel.
7.
Do one of the following:
Remove the air baffle.
•
Remove the midplane drive cage.
•
8.
Remove the riser cage.
9.
(Optional) Install the risers.
10. Install the type-p controller:
a. Remove the riser slot blank.
b. Install the storage controller
Make sure that the storage controller is seated firmly in the slot.
11. Install the riser cage.
12. Cable the type-p storage controller.
13. (Optional) If the controller cable is not connected to the front drive backplane:
a. Remove the fan cage.
b. Remove the midwall bracket.
c.
Cable the storage
14. If removed, install the following components:
a. Install the midwall bracket.
b. Install the fan cage.
controller.
.
Hardware options installation
191
Advertisement
Table of Contents
