5.
Disconnect all peripheral cables from the server.
6.
Remove the server from the rack.
7.
Remove the access panel.
8.
Do one of the following:
Remove the air baffle.
•
Remove the midplane drive cage.
•
9.
Remove the fan cage.
10. Remove the midwall bracket.
11. Remove the LFF drive backplane bracket.
12.
IMPORTANT: Retain the removed partitions to revert to the 12 LFF drive configuration.
Remove the left partition:
a. Remove the partition screws (callout 1).
b. Remove the partition (callout 2).
Hardware options installation
134