Table of Contents
Advertisement
13. Install the front 2 SFF side-by-side drive cage:
a. Install the front 2 SFF side-by-side drive cage in the server (callout 1).
b. Install the drive cage screws (callout 2).
14. Install the LFF drive backplane bracket.
15. Connect the cables to the drive backplane.
16. Install the midwall bracket.
17. Install the fan cage.
18. Do one of the following:
Install the air baffle.
•
Installing the midplane drive cage.
•
19. Install the access panel.
20. Install the server into the rack.
21. Connect all peripheral cables to the server.
22. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
Hardware options installation
135
Advertisement
Table of Contents
