2.
Install the SSDs on the boot device carrier:
a. Remove the SSD mounting screw.
b. Insert the SSD into the M.2 slot at a 45° angle (callout 1).
c. Carefully press the SSD down to the horizontal position (callout 2).
d. Install the SSD mounting screw (callout 3).
3.
Install the boot device carriers:
a. If closed, pivot the carrier latch to open.
b. Slide the carrier into the boot device cage (callout 1).
c. Pivot the latch to close (callout 2).
Make sure that the carrier latch is locked on the boot device cage.
Hardware options installation
172