Table of Contents
Advertisement
15. To allow hot-plug access to the SSDs on the boot device, remove the security cover.
16. Install the rear 2 SFF drive cage.
17. Do one of the following:
Install the air baffle.
•
Installing the midplane drive cage.
•
18. Install the access panel.
19. Install the server into the rack.
20. Connect all peripheral cables to the server.
21. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
22. If installed, close the cable management arm.
Hardware options installation
186
Advertisement
Table of Contents
