Table of Contents
Advertisement
Procedure
1.
Power down the server.
2.
If installed, open the cable management arm.
3.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4.
Disconnect all peripheral cables from the server.
5.
Remove the server from the rack.
6.
Remove the riser cage.
7.
Identify the riser slot compatible with the expansion card.
8.
Remove the riser slot blank.
Retain the screw and blank. The screw will be used to secure the new expansion card.
9.
Make sure that any switches or jumpers on the expansion card are set properly.
For more information, see the documentation that ships with the expansion card option.
10. Install the expansion card:
Make sure that the expansion card is seated firmly in the slot.
Hardware options installation
113
Advertisement
Table of Contents
