Table of Contents
Advertisement
4.
TECHNICAL DESCRIPTION
4.1.
SPECIFICATIONS
4.1.1. HDTV Serial Digital Video Input
Standard:
1.485 Gb/sec HDTV Serial component digital SMPTE 292M
standards supported shown in Table 2-4
software selectable or auto detect
Connector:
BNC per IEC 60169-8 Amendment 2.
Equalisation:
Automatic to 100m @ 1.5Gb/s with Belden 1694 or equivalent cable
4.1.2. HDTV Serial Digital Video Outputs
Standard:
SMPTE 292M, same as input
Outputs:
2 Program video with RP188 Ancillary Time code embedded and optional
characters
Connectors:
BNC per IEC 60169-8 Amendment 2.
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot:
<10% of amplitude
Wide Band Jitter:
< 0.2 UI
4.1.3. Reference Input
Type:
NTSC or PAL Colour Black 1 V p-p, or
Composite bi-level sync (525i/59.94 or 625i/50) 300 mV (See Table 2-4)
Connector:
BNC loop per IEC 60169-8 Amendment 2.
Termination:
High Impedance
4.1.4. LTC Generators
Standard:
SMPTE 12M
Frame Rate:
24, 25 and 30 Fps nominal
Connectors:
3 pin male XLR type connector.
Level:
Adjustable, 0.5V to 4.5V p-p
4.1.5. LTC Reader
Standard:
SMPTE 12M
Frame Rate:
24, 25 and 30 Fps nominal
Connector:
3 pin female XLR type connector
Level:
0.2 to 4V p-p, balanced or unbalanced
TECHNICAL DESCRIPTION
HD9010TM-IRIG HDTV Time Code Master / IRIG-B Reader Manual
Revision 2.1
Page 4-1
Advertisement
Table of Contents
