Table of Contents
Advertisement
VIDEO STANDARD
REFERENCE MODE
LTC LEVEL
AUX LTC LEVEL
COM 1 BAUD RATE
AUXCOM BAUD RATE
SYS PARM CLASS
SYS PARM NUMBER
SYS PARM VALUE
HARDWARE VERSION
FIRMWARE VERSION
UPGRADE FIRMWARE
FACTORY RESET
3.7.1. Selecting the Video Standard
VIDEO TYPE
Vstd: auto
Vstd: 1080i/60
Vstd: 1080i/50
Vstd: 720p/60
Vstd: 1080p/24sF
OPERATION
HD9010TM-IRIG HDTV Time Code Master / IRIG-B Reader Manual
Sets the video standard
Selects the generator framing reference
Sets the amplitude level of the main LTC output
Sets the amplitude level of the auxiliary LTC output
Sets the baud rate of the COM 1 serial port
Sets the baud rate of the AUX COM serial port
Sets the system parameter class for the parameter value to change
Sets the system parameter number for the parameter value to change
Sets the system parameter value
Displays the current hardware version of the unit
Displays the current firmware version of the unit
Load new firmware into the unit
Resets the unit to its Factory default condition
Table 3-4: Top Level of the Utility Setup Menu
The VIDEO STANDARD menu item is used to set the video standard in
use.
When you select auto the HD9010TM-IRIG will auto detect the video
standard and automatically reconfigure itself.
standard will be shown in brackets.
You can also select the video standard manually.
Select 1080i/60 for operation with 1080i/59.94 or 1080i/60 video
conforming to SMPTE 274M.
Select 1080i/50 for operation with 1080i/50 video conforming to SMPTE
274M.
Select 1080p/24sF for operation with 1080p/23.98 or 1080p/24 video
conforming to SMPTE 274M.
Select 720p/60 for operation with 720p/59.94 or 720p/60 video
conforming to SMPTE 296M.
Revision 2.1
The current video
Page 3-17
Advertisement
Table of Contents
