Switches And Buttons; Power Button; Panel Buttons - Epson TM-H5000II Series Manual

CONFIDENTIAL

3.3 Switches and Buttons

3.3.1 Power Button

The power button (a rocker switch) located on the lower left front of the printer turns the power
on or off.
NOTE: Turn on the power only after connecting the power supply.

3.3.2 Panel Buttons

There are panel buttons on both the slip and receipt sections. All the panel buttons are disabled
by ESC c 5.
3.3.2.1 Slip
1) RELEASE button (non-locking push button)
[Function] Release paper
2) REVERSE button (non-locking push button)
[Function] Reverse paper feeding for the line spacing set by ESC 2 and ESC 3
3) FORWARD button (non-locking push button)
[Function] Feed paper for the line spacing set by ESC 2 and ESC 3
Paper feed is not executed without paper.
NOTE: When the printer cover is open, the printer will not operate.
3.3.2.2 Receipt
FEED button: Non-locking push button
[Function] · If you push this button once and release it, the printer feeds paper for one line
based on the line spacing set by ESC 2 and ESC 3. However, Paper feeding
using the FEED button cannot be performed under the following conditions:
The paper roll end sensor detects a paper end
When the printer cover is open.
· If you push this button when the printer is in the macro execution standby state,
the defined macro is executed.
· During self-test printing, you can stop the self test temporarily by pressing this
button and restart it by pressing the button again.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
E
65
SHEET
64