Switches And Buttons; Power Button; Panel Buttons - Epson TM-U925 Manual

3.3 Switches and Buttons

3.3.1 Power button

The power button on the front of the printer turns the power on or off.
NOTE: Turn on the power only after connecting the power supply.

3.3.2 Panel buttons

Panel buttons are enabled or disabled by the ESC c 5 command except for the power button.
These buttons are inactive if they are disabled.
1) RECEIPT FEED BUTTON:
[Function] · If this button is pushed once and released, the printer feeds receipt paper for one line
based on the line spacing set by ESC 2 and ESC 3. If this button is held down, the
printer feeds paper continuously.
· Paper is fed after the carriage is moved to the center of the paper roll.
[Note] The switch is enabled when the printer cover is open, regardless of the ESC c 5 setting.
2) SLIP FEED button:
[Function] · If this button is pushed once and released, the printer feeds slip paper for one line
based on the line spacing set by ESC 2 and ESC 3. If this button is held down, the
printer feeds paper continuously.
· Slip paper is fed after
· This button is enabled when the printer cover is open, regardless of the ESC c 5
[Note]
setting.
· This button does not load the slip. The slip can be loaded only by selecting the slip
with a command and waiting to insert the slip.
EPSON
Non-locking push button
Non-locking push button
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
37
SHEET
36