Epson TM-H5000II Series Manual page 179

CONFIDENTIAL
· When the printer is disabled by ESC = (Select peripheral device), the four
status bytes are transmitted whenever the status changes.
· When using DLE EOT, GS I I I I , or GS r, the status transmitted by these
commands and ASB status must be differentiated, according to the procedure
in Appendix E, Transmission Status Identification .
· The status to be transmitted are as follows:
First byte (printer information)
Bit Off/On
0 Off
1 Off
2 Off
On
3 Off
On
4 On
5 Off
On
6 Off
On
7 Off
The printer is off-line when the printer cover is open during non-printing.
When the printer cover is open during printing, the printer is in the recoverable error in the slip
mode.
When the receipt is selected, the printer is in the automatic recovery error status.
Hex Decimal Status for ASB
00 0 Not used. Fixed to Off.
00 0 Not used. Fixed to Off.
00 0 Drawer kick-out connector pin 3 is LOW.
04 4 Drawer kick-out connector pin 3 is HIGH.
00 0 On-line.
08 8 Off-line.
10 16 Not used. Fixed to On.
00 0 Cover is closed.
20 32 Cover is open.
00 0 Paper is not being fed by using the PAPER FEED button.
40 64 Paper is being fed by using the PAPER FEED button.
00 0 Not used. Fixed to Off.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
E
167
SHEET
166