Buttons And Switches; Power Switch; Panel Button - Epson TM U200D - B/W Dot-matrix Printer Technical Manual

Buttons and Switches

Power Switch

Type:
Function:
Note:
Turn on the power only after connecting the power supply.
RAM is completely initialized when the printer is turned off using the power switch.

Panel Button

The panel button is enabled or disabled by the ESC c 5 command. This button is inactive if it is
disabled.
Feed (FEED) button:
Note:
The ESC c 5 command enables or disables the panel button. When disabled, the button will not
function. However, when loading a paper roll, you can feed paper with the FEED button during the
paper loading waiting time if the paper loading waiting time is set by GS z 0. Press the FEED
button again after the PAPER OUT LED starts blinking to return the printer to the on-line state.
Rev. B
See-saw type
The power switch turns the power on or off.
Type: Non-locking push button
Function: Feeds paper based on the line feed amount set by ESC 2
and ESC 3.
TM-U200D/U200PD Technical Manual
Features and General Specifications 1-23