Esc/Pos Commands; Various Utilities; Switches And Buttons - Epson TM-T70 Technical Reference Manual

3.1.3 ESC/POS Commands

To directly control the TM printer using ESC/POS commands, EPSON proposes printing/
control via ESC/POS commands. The printer can be controlled directly by sending ESC/POS
commands from an application to the printer. For detailed information about ESC/POS
commands, please contact EPSON or your dealer.

3.1.4 Various Utilities

We provide the utilities described below for developers of TM printer applications. You can
obtain the utilities from one of the following URLs:
For customers from North America, go to the following web site:
http://pos.epson.com/
For customers from other countries, go to the following web site:
http://www.epson-pos.com/
Select the product name from the "Select any product" pull-down menu.
3.1.4.1 Memory Switch Setting Utility
This utility is designed to perform the memory switch-related functions of the TM printer easily.
❏ You can execute a communication test and self-test.
❏ You can set the switches, etc. (such as customized values and serial communication
condition).
3.1.4.2 IP address setup utility for UB-E02
This utility and its detailed manual for developers allow you to set an IP address for a 10BASE-
T/100BASE-TX Ethernet interface installed in the TM printer. Customers who have purchased
the Ethernet model TM printer need this utility.
3.1.4.3 IP address setup utility for UB-R02
This utility and its detailed manual for developers allow you to set an IP address for a Wireless
LAN interface installed in the TM printer. Customers who have purchased the Wireless LAN
model TM printer need this utility.
3.1.4.4 TM Flash logo utility
This utility is designed to save logos (bitmaps) to NVRAM (non-volatile RAM). By storing shop
logos to NVRAM, the print speed can be increased.

3.2 Switches and Buttons

On this printer, you can disable or enable the FEED button. For details on how to switch between
disabled or enabled, refer to the documentation for OPOS Advanced Printer Driver and ESC/
POS commands, respectively.
3-6 Application Development Information Rev. A