General Specifications; Slip Section; Printing Specifications; Character Specifications - Epson TM-H5000II Series Manual

CONFIDENTIAL

1. GENERAL SPECIFICATIONS

1.1 Slip Section

1.1.1 Printing Specifications

1) Printing method:
2) Head wire configuration: 9-pin vertical line, wire pitch 1/72 inch
3) Head wire diameter:
4) Printing direction:
5) Printing speed:
6) Characters per line:
7) Characters per inch:
8) Kanji characters print:

1.1.2 Character Specifications

1) Number of characters:
2) Character structure:
3) Character size:
Serial impact dot matrix
0.29 mm (.01")
Bidirectional, minimum distance printing
Refer to Table 1.1.1
Refer to Table 1.1.1
Refer to Table 1.1.1
Unidirectional two-pass printing
Alphanumeric characters: 95
International characters:
Extended graphics:
Multilingual character model supports printing with one of the
following characters:
À Japanese Kanji (Two-pass printing font)
JIS (JIS X0208-1990) Level 1, Level 2
Á Chinese Kanji (Two-pass printing font)
7580 (GB2312)
 Taiwanese Kanji
13494 (Big 5)
à Thai character (3-pass printing font)
128 characters ´ 7 pages (133 character types)
Font A: 9 ´ 9 3-dot spacing (in half dot units)
Font B: 7 ´ 9 2-dot spacing (in half dot units)
Kanji: 16 ´ 16 Left 0-dot, Right 2-dot spacing (in half dot units)
Thai characters
Font A: 9 ´ 27 3-dot spacing (in half dot units)
Font B: 7 ´ 27 2-dot spacing (in half dot units)
Larger spacing can be changed by using ESC SP or FS S.
Refer to Table 1.1.1
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
32
128 ´ 10 pages
(including one space page)
NO.
SHEET
REVISION
NEXT
E
2
SHEET
1