Epson TM-H5000II Series Manual page 104

CONFIDENTIAL
FF
[Name] Print and eject slip paper (enable only when slip is selected)
Print and return to standard mode in page mode (enable only when paper roll is
selected)
[Format] ASCII
Hex
Decimal
For
[Description] Prints the data in print buffer and ejects the slip paper.
· The command is enabled only when slip paper is selected for printing by
[Notes]
ESC c 0.
· When the slip ejection length has been set by ESC C, the specified length is
ejected, regardless of the TOF and BOF sensors.
· The slip is ejected in the direction specified by ESC F.
· This command sets the print position to the beginning of the line.
· After the slip is ejected, the printer selects the paper roll.
[Reference] ESC C, ESC F
For
[Description] Prints the data in the print buffer collectively and returns to standard mode.
· This command is enabled only in page mode.
[Notes]
· The buffer data is deleted after being printed.
· The printing area set by ESC W is reset to the default setting.
· The printer does not execute paper cutting.
· This command sets the print position to the beginning of the line.
[Reference] ESC FF, ESC L, ESC S
FF
0C
12
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
E
92
SHEET
91