Gs * X Y D1 - Epson TM-H5000II Series Manual

CONFIDENTIAL
GS * * * * x y d1 ... d(x ´ ´ ´ ´ y ´ ´ ´ ´ 8)
[Name] Define user-defined bit image
[Format] ASCII
Hex
Decimal
1 £ x £ 255
[Range]
1 £ y £ 48 (when paper roll is selected)
1 £ y £ 255 (when slip is selected)
0 £ d £ 255
[Description] Defines a user-defined bit image using the number of dots specified by x and y
· x specifies the number of dots in the horizontal direction.
· y specifies the number of dots in the vertical direction.
· The number of dots in the horizontal direction is x ´ 8, in the vertical direction it
[Notes]
is y ´ 8.
· If x ´ y is out of the specified range, this command is disabled.
· The d indicates bit image data. Data ( d ) specifies a bit printed to 1 and not
printed to 0.
· A user-defined character and a user-defined bit image cannot be defined
simultaneously. When this command is executed, the user-defined character is
cleared.
· The downloaded bit image definition os cleared when:
· The user-defined bit image can be defined on the selected paper by the
ESC c 1.
[Reference] ESC &, ESC c 1, GS /
*
GS
1D 2A
29 42
where x ´ y £ 1536 (when the paper roll is selected)
where x ´ y £ 404 (when the slip is selected)
¬ ESC @ is executed.
- ESC & is executed.
® FS q is executed.
¯ Printer is reset or the power is turned off.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
d1 ... d(x ´ y ´ 8)
x y
d1 ... d(x ´ y ´ 8)
x y
d1 ... d(x ´ y ´ 8)
x y
NO.
SHEET
REVISION
NEXT
E
SHEET
150
151