Epson TM-H5000II Series Manual page 108

CONFIDENTIAL
n = 3: Error status
Bit Off/On
0 Off
1 On
2 Off
On
3 Off
On
4 On
5 Off
On
6 Off
On
7 Off
Bit 2: Mechanical error indicates the home position detection error, carriage detection
error, slip paper ejection error, or slip cover open error during printing.
Bit 2 and 3: If these errors occur due to paper jams or the like, it is possible to recover by
correcting the cause of the error and executing DLE ENQ n (1 £ n £ 2). If an error
due to a circuit failure (e.g. wire break) occurs, it is impossible to recover.
Bit 6: When printing is stopped due to high print head temperature until the print head
temperature drops sufficiently or when the paper roll cover is open during printing,
bit 6 is On.
Hex Decimal Function
00 0 Not used. Fixed to Off.
02 2 Not used. Fixed to On.
00 0 No mechanical error.
04 4 Mechanical error occurs.
00 0 No auto-cutter error.
08 8 Auto-cutter error occurs.
10 16 Not used. Fixed to On.
00 0 No unrecoverable error.
20 32 Unrecoverable error occurs.
00 0 No auto-recoverable error.
40 64 Auto recoverable error occurs.
00 0 Not used. Fixed to Off.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
NO.
SHEET
REVISION
NEXT
E
96
SHEET
95