Related Manuals for Epson H5000II - B/W Direct Thermal
Summary of Contents for Epson H5000II - B/W Direct Thermal
- Page 1 TM-H5000II User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente 401406401...
-
Page 2: Printer Parts
Printer Parts paper roll cover autocutter cover POWER ERROR PAPER paper roll FEED control pane front cover POWER FORWARD ERROR slip paper on/off switch RELEASE SLIP control panel REVERSE RELEASE DIP Switch Tables Serial Parallel Function Function Data receive error Ignored Prints “?”... -
Page 3: Emc And Safety Standards Applied
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to... -
Page 4: Caution Labels
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous. -
Page 5: Slip Control Panel
English Unpacking The following items are included with the standard specification printer. If any item is damaged, contact your dealer. ❏ Printer ❏ Power switch cover ❏ Ribbon cassette ❏ Paper roll ❏ Hexagonal lock screws (2 pcs) (only for the serial interface) Control Panels Paper Roll Control Panel FEED button... -
Page 6: Using The Power Switch Cover
To use the cover, install it as shown in illustration Installing the Ribbon Cassette Use the EPSON ERC-31 ribbon cassette. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. -
Page 7: Installing The Paper Roll
English CAUTION: Never turn the ribbon cassette’s feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged. 1. Turn the printer on, and open the front cover by pulling up the tab on the left side. -
Page 8: Inserting Slip Paper
English Inserting Slip Paper Note: Do not use wrinkled or curled paper. 1. When the SLIP LED flashes, insert slip paper, using the right edge of the slip paper inlet as a guide (see illustration 2. When you insert the slip into the inlet as far as it will go, the sensor detects the slip, the SLIP LED changes from flashing to on, and the printer draws the paper in... -
Page 9: Cleaning The Paper Roll Print Head
Use a moistened cleaning sheet, such as PRESAT brand (KIC) “Check Reader Cleaning Card” or an equivalent commercially available cleaning sheet. For the MICR feed roller Use an adhesive cleaning sheet available from EPSON. Contact your dealer. Cleaning procedure Use this procedure for both cleaning sheets. -
Page 10: Troubleshooting
English Troubleshooting No lights on the control panel Check that power supply cables are plugged into the printer correctly, the power unit, and power outlet. The ERROR light is on, and nothing is printing If the PAPER OUT LED is on, paper is not inserted or is not inserted correctly. - Page 11 English 3. If paper is caught in the automatic cutter in the receipt section and the paper roll cover cannot be opened, open the cutter cover toward you, as shown in illustration 8. 4. Rotate the knob until ▼ appears in the window, as shown in illustration 9.
- Page 12 English TM-H5000II specifications Printing method Slip — Serial impact dot matrix, 9-pin vertical line Receipt — Thermal line printing Printing direction Slip — Bidirectional, minimum distance printing Receipt — Unidirectional with friction feed Slip — 9 × 9 font: 66; 7 × 9 font: 88 Characters per line (default) Receipt —...