Esc C 0 N - Epson TM-H5000II Series Manual

CONFIDENTIAL

ESC c 0 n

[Name] Select paper type(s) for printing
[Format] ASCII
Hex
Decimal
1 £ n £ 4
[Range]
[Description] Selects the type of paper for printing, using n as follows:
Bit Off/On
0 Off
On
1 Off
On
2 Off
On
3-7 -
· This command is available only when processed at the beginning of a line.
[Notes]
· This command is ignored in page mode.
· When this command is input, the printer executes the following:
If paper roll is selected, a previously selected slip paper is cancelled out and
ejected.
If a slip was previously selected and is selected again, no operation is
executed.
If paper roll was previously selected, and then slip paper is selected, the printer
waits for the slip paper to be loaded.
· When either bit 0 or 1 is on, the paper roll is selected.
· When a slip is not inserted correctly, the printer ejects the slip and waits for the
slip to be inserted. Refer to Section 1.1.5 for inserting a slip.
[Default] n = 3
ESC c
1B 63
27 99
Hex Decimal Function
00 0 Paper roll disabled.
01 1 Paper roll enabled.
00 0 Paper roll disabled.
02 2 Paper roll enabled.
00 0 Slip paper disabled.
04 4 Slip paper enabled.
- - Undefined.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
0 n
30 n
48 n
NO.
SHEET
REVISION
NEXT
E
SHEET
130
131