Gs ^ R T M - Epson TM-H5000II Series Manual

CONFIDENTIAL

GS ^ r t m

[Name] Execute macro
[Format] ASCII
Hex
Decimal
0 £ r £ 255
[Range]
0 £ t £ 255
m = 0, 1
[Description] Executes a macro.
· r specifies the number of times to execute the macro.
· t specifies the waiting time for executing the macro.
· m specifies macro executing mode.
· The waiting time is t ´ 100 msec for every macro execution.
[Notes]
· If this command is received while a macro is being defined, the macro definition
is aborted and the definition is cleared.
· If the macro is not defined or if r is 0, nothing is executed.
· When the macro is executed ( m = 1), paper always cannot be fed by using the
FEED, FORWARD, or REVERSE buttons.
[Reference] GS :
GS ^
1D 5E
29 94
When the LSB m = 0:
The macro executes r times continuously at the interval specified by t .
When the LSB of m = 1:
After waiting for the period specified by t , the PAPER OUT LED
indicators blink and the printer waits for the FEED button to be pressed.
After the button is pressed, the printer executes the macro once. The
printer repeats the operation r times.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
r t m
r t m
r t m
NO.
SHEET
REVISION
NEXT
E
SHEET
164
165