Bosch Solution 16i Installation Manual page 94

Solution 16i
Installation Manual

3) Using the numeric keys, enter all the digits of the
telephone number. You can change a single digit by
scrolling the cursor left or right. For special
characters including, pause, * or #, use the up and
down arrow keys.
4) Press [OK] to save and exit or press [MENU] to exit
without saving.
Comms > Telephone Number >
Secondary Dest 2
1
This menu sets the secondary telephone number for
Destination 2. This will typically be the secondary base
station receiver number.
1) Enter your Installer PIN + [MENU].
2) Enter [5] + [1] + [4] + [OK]. The keypad will display
the current Secondary Telephone Number for
Destination 2.
_
3) Using the numeric keys, enter all the digits of the
telephone number. You can change a single digit by
scrolling the cursor left or right. For special
characters including, pause, * or #, use the up and
down arrow keys.
4) Press [OK] to save and exit or press [MENU] to exit
without saving.
Comms > Telephone Number >
Domestic Number
1
First
Number
1
Second
Number
1
Third
Number
Refer to Menu 5-0-0 for instructions on Domestic Phone
Number setup.
Up to 3 Phone numbers can be entered for Domestic
i
dialing. Press [OK] after each telephone number is
Note
entered to save and move to the next number.
9-4
Comms Programming

L514
MENU 5-1-4

Digits
Set-Ph
-
MENU 5-1-5
 
Digits
Digits
Digits
Comms > Telephone Number >
Call Forward On
1
• 6 1
The panel is able to activate certain Telco services such
as Call Forwarding when the system is armed. Call
forwarding means that your customer will no longer need
to remember to manually activate the Call Forward On
feature via the telephone before leaving.
32
MENU 5-1-6 allows you to program the Call Forward
On number sequence. When armed the panel will
automatically seize the phone line and dial the number
sequence and then hang up.
In Australia, a typical sequence for activating the Call-
Forward On feature (All Calls) might be:
*61 0416123456 *20 #
*61 diversion type - Call Forward On -
Immediate.
0416123456 Telephone number that you want calls
to be diverted to. Example shows mobile
number.
*20 20 second delay
# end of sequence
Call Forward On All Calls -
Immediate
[*][2][1] [Phone Number] [#]
or
If No Answer
[*][6][1] [Phone Number] [#]
or
32
If No Answer (After 5 to 60 Seconds)
[*][6][1] [Phone Number] [*] [Time In Seconds] [#]
32
For other countries please substitute the appropriate
commands after consultaion with your telephone
32
company.
1) Enter your Master PIN + [MENU].
2) Enter [5] + [1] + [6] + [OK].
The keypad will display the current call forward on
number sequence.
-
 
Digits
, * 2 0 #
A61PA2
Bosch Security Systems 09/11 BLCC500I
cfOnPh
MENU 5-1-6
32