Bosch Solution 16i Installation Manual page 144

Solution 16i
Installation Manual

Auto Arming an Area
The Solution panel can be configured to automatically
arm and or disarm an area automatically if required.
Procedure
To setup an Auto Arming time, select a schedule that
is not being used, and program the schedule name to
something convenient. Set the start time for the schedule
to the arming time you require. The stop time should be
set to 12:00am or --:--am, which prevents the system from
auto disarming.
Now set the Schedule Function, MENU 7-5-3 to Area On/
Off and the Schedule Index, MENU 7-5-4 to correspond to
the area to operate. If an index of 0 is used then arming
will occur for all areas. Finally select the days of the week
you wish auto arming to occur in MENU7-5-2
Operating an Output with a Schedule
To automatically operate an output using a schedule,
select an schedule that is not being used, and program
the schedule name to something convenient. Set the start
time to the time you want the output to operate, and set
the stop time to the time you want the output to turn off.
Set the Schedule Function MENU 7-5-3 to Operate Output
and set the Schedule Index MENU 7-5-4 to the Output
number which is to operate. Finally set the days of the
week the output is to operate on.
Unlock A Door Using A Reader
This example assumes Reader 1, Access Group 4 and
Output 5 are being used.
Procedure
1) Assign Proximity Reader 1 to Access Group 4, MENU
1-6-1.
2) Set output 5 to Event type = 60 - Access Group and
Access Assignment = 4
3) Assign the user to Access Group 4, MENU 1-4-5.
Users can belong to multiple Access Groups
allowing access to multiple doors.
4) Assign Reader 1 to Area Assignment = 0 (All Areas)
and then set disable arm/disarm options in MENU
1-6-3.
5) Present the Token to the Reader to access the door.
Unlock A Door and Disarm Area 1 Using A Reader
This example assumes Reader 1, Access Group 4 and
Output 5 are being used.
Procedure
1) Assign Proximity Reader 1 to Access Group 4, MENU
1-6-1.
2) Set output 5 to Event type = 60 -Access Group and
Access Assignment = 4.
12-2
Programming Examples

3) Assign the user to Access Group 4, MENU 1-4-5.
Users can belong to multiple Access Groups
allowing access to multiple doors.
4) Assign Reader 1 to Area Assignment = 1 and then
set the disarming option in MENU 1-6-3.
5) Present the Token to the Reader to Disarm, present
the Token again to release the door.
Unlock A Door and Arm/Disarm Area 1 Using A
Reader
This example assumes Reader 1, Access Group 4 and
Output 5 are being used.
Procedure
1) Assign Proximity Reader 1 to Access Group 4, MENU
1-6-1.
2) Set output 5 to Event type = 60 (Access Group) and
Access Assignment = 4.
3) Assign the user to Access Group 4, MENU 1-4-5.
Users can belong to multiple Access Groups
allowing access to multiple doors.
4) Assign Reader 1 to Area Assignment = 1 then set
the arming/disarming and badging option in MENU
1-6-3.
5) Present the token to Disarm, present the Token to
release door, present the token 3 times to Arm the
system.
Using C.L.I. to establish Upload/Download
Connection
Calling Number Identification is a feature provided by
your teleco line provider that can help you identify who is
calling by displaying the caller's phone number.
This feature is used by the Solution control panel to
identify the telephone number that the upload download
computer is calling from. When the Solution panel
verifies that the calling number corresponds to any one
of the three different numbers programmed in MENU
5-3-7 — CLI Number then the panel will answer the call
immediately.
This feature is extremely helpful for remote access using
the Solution Link software to eliminate the need for
making multiple calls to fax bypass or annoying customer
calls where you have to let the number ring numerous
times to trigger the panel into answering your call.
The numbers you store into MENU 5-3-7 should include
the full STD number of the calling line you which the
panel to answer on.
Almost every telephone line will send its CLI information
when making a call however you will not receive the
callers line information if you don't specifically request
and enable this feature with your telco line provider.
Bosch Security Systems 09/11 BLCC500I