Bosch Solution 16i Installation Manual page 46

Solution 16i
Installation Manual

2580AA
4) Press [OK] to save and exit or press [MENU] to exit
without saving.
P R OX I M I T Y TO K E N S & C A R D S
Proximity tokens and cards can be used as an alternative
to a PIN number when on and off the system.
A token is a small plastic tag card that has a unique ID. A
user can place the token card in front of a reader keypad
to turn the system or specific areas on and off.
This feature requires that at least one keypad that has an
in-build prox reader fitted. This section outlines how to
add and delete proximity tokens or cards. If you try to
add a token from a keypad that does not have an in-built
reader, the keypad will prompt you to select the reader
you wish to learn the new token.
You should discuss this feature with your installer for more
details on your particular installation.
Access > Token >
Add Token
This menu allows a master user or Installer to add a new
token for other users provided they are assigned to the
same area(s) as the Master user.
This feature requires that at least one keypad that has an
in-build prox reader fitted.
1) Enter your Installer PIN or Master PIN + [MENU].
2) Enter [1] + [2] + [0] + [OK].
The keypad will display the Ur = prompt.
3) Enter the user number you want to add the token
to, then press [OK].
If you are currently using a keypad with built in reader
the system will prompt you to present the new token
to the keypad.
4) Present the token at the keypad to learn the new
token.
5-4
Access Programming

AddPrO
-
MENU 1-2-0
 
Ur=
PrSEnt
Access > Token >
Delete Token
This menu allows a master user or Installer to delete a
users proximity token or card. Master users can only
delete user's tokens that belong to the same area.
1) Enter your Installer PIN or Master PIN + [MENU].
2) Enter [1] + [2] + [1] + [OK].
The keypad will display the Ur = prompt.
3) Enter the user number who's token you want to
delete, then press [OK].
If you have selected a valid user with a token, the
system will ask you to confirm the deletion.
4) Press [OK] again to delete the token, or press [MENU]
to cancel.
Access > Token >
Token Status
This menu allows a master user or Instller to identify which
user belongs to the token.
1) Enter your Installer PIN or Master PIN + [MENU].
2) Enter [1] + [2] + [2] + [OK].
The system will prompt you to present the token to be
identify to the keypad.
3) Present the token to the keypad.
Once the token is presented the system will display
the user number who the token belongs to. In the
example below the token belongs to user 9.
4) Press [OK] when finished.
deLPrO
-
MENU 1-2-1
 
Ur=
Del ?
iD PrO
-
MENU 1-2-2
 
PrSEnt
Ur009
Bosch Security Systems 09/11 BLCC500I