3.7
Calibration
The Navigator of Advantech DAQNavi provides the calibration utility to calibrate the
analog input and analog output circuitry of the device. Figure 3.45 shows the inter-
face of the calibration utility. Follow the instructions shown to calibration the device.
For a multi-function device, which contains both analog input and analog output func-
tions, analog input calibration must be performed before analog output calibration.
Figure 3.45 Calibration utility.
When any of the calibration parameters is changed, user can save the change by
clicking "Save as power-up values" button, or can reload power-up value by clicking
"Reload power-up values" button. The status of the calibration parameters is shown
in "Action Status" column. If required, user can also load factory default calibration
parameters by clicking "Load factory default" button.
43
PCI-1716_Series User Manual