Table of Contents
Advertisement
Installation
Fitting the Accessory Mounting Bracket (optional)
The optional accessory mounting bracket can be fitted so that a monitor
can be mounted to the FE-55. The bracket is designed for use with the
Autoscript Universal On-Air Mounting Bracket (p/no. MT-OA-UNI).
1.
Remove the two capping screws from the front body of the FE-55.
2.
Align the accessory
mounting plate with
the two holes and
secure in position
with the countersink
screws provided.
16
3.
Lower the monitor mounting arm into position on the mounting
plate, aligning the two holes with the mounting studs.
2.5 mm
4.
Fit the two threaded
bosses supplied with
the arm onto the
mounting studs to
secure in position.
2.5 mm
Advertisement
Table of Contents
