Safety - Vinten FE-55 User Manual

Safety

Important information on the safe installation and operation of
this product. Read this information before operating the product.
For your personal safety, read these instructions. Do not operate
the product if you do not understand how to use it safely. Save
these instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety
instructions must be followed to avoid possible personal injury and
avoid possible damage to the product.
WARNING!
Where there is a risk of personal injury or injury to others,
comments appear supported by the warning triangle symbol.
Where there is a risk of damage to the product, associated
equipment, process or surroundings, comments appear
supported by the word 'Caution'.
ELECTRIC SHOCK
Where there is a risk of electric shock, comments appear
supported by the hazardous voltage warning triangle.
Intended Use
The FE-55 robotic elevation unit is designed to support a robotic head
and camera together with ancillary equipment weighing up to 25 kg (55
lb).
Camera operators can remotely control the height axis using Vinten
control systems.
The FE-55 is designed for use in TV studios and other applications
including houses of worship, conference facilities and auditoriums. It
can also be used on outside broadcasts (OB) when protected from
weather by a suitable waterproof cover.
2
Electrical Connection
WARNING! Risk of electric shock. Always disconnect and
isolate the product from the power supply before attempting
any servicing or removing the covers.
WARNING! Risk of electric shock. Always check cables for
signs of damage. Damaged cables can cause personal injury
and/or damage the equipment.
WARNING! It is the responsibility of the local organisation to
ensure that the product is periodically checked for electrical
safety in accordance with local regulations.
CAUTION! This product must be connected to a power supply
of the same voltage (V) and current (A) as indicated on the
product. Refer to the technical specifications for the product.
CAUTION! Limit the primary AC supply cable (floor cable)
current to a maximum of 16A (via the AC wall socket or
fused connection).
CAUTION! All connections to other devices must be made
using shielded cables.
CAUTION! Using alternative power sources will invalidate
the system EMC liability.
CAUTION! Do not exceed the current output limit of the
product when powering auxiliary devices.
CAUTION! Always use a fuse of the correct type and rating
for the product. Refer to the Technical Specifications for the
product.
CAUTION! The product must be connected to the AC supply
using a 30 mA RCD unit.