Table of Contents
Advertisement
Mounting the camera (optional Quickfit adaptor)
If not already attached, secure the Quickfit adaptor
provided (1).
Free the Quickfit wedge
and operating the wedge release (24).
Fit the Quickfit wedge
Set the platform level and engage the centre lock (3).
Insert the forward end of the wedge into the forward end of the adaptor. Lower the rear of the
wedge into the adaptor until an audible click indicates that the wedge is locked.
Mounting the camera (optional Quickfit adaptor)
(22)
from the adaptor by simultaneously pushing in the safety catch
(22)
to the camera with the two screws provided (21).
(23)
to the slide plate
(14)
(21)
(22)
(23)
(24)
(25)
(1)
(14)
(3)
with the two screws
(25)
10
Advertisement
Table of Contents
