Indicator Leds - Vinten FE-55 User Manual

Operation

Indicator LEDs

When the FE-55 is powered up, the indicator LEDs located at the top of
the connections panel show whether data communications (green
LED) or a genlock signal (amber LED) are present.
The indicator LEDs are also used to convey information about the
current operational status of the FE-55, by displaying different solid or
flashing colours.
Solid colours
Flashing colours
Bi-flashing colours
26
The following table shows the indicator LED states which are displayed
during operation of the FE-55.
Data Genlock
Status
LED LED
System Up
Robot
Active
Identity
Genlock
Connected
Additional Indication Status
The indicator LEDs can also display error and warning status. Refer to
the section Troubleshooting on page 30 for more information.
Description
The FE-55 is powered
up and receiving data.
The FE-55 and
connected head are
enabling or moving.
The FE-55 has been
selected by the control
system and 'Identify'
mode has been toggled
on.
A genlock signal is
connected and active.