Table of Contents
Advertisement
Installation
Operating the Wheel Brakes
The wheels on the FE-55 are fitted with foot operated wheel brakes. All
four wheel brakes must be applied to ensure the unit is stable and held
firmly in position.
Applying the Wheel Brakes
Press down firmly on the top of
the lever to latch the brake into
the locked position.
!
Releasing the Wheel Brakes
To release, press down firmly on
the centre 'pop-up' lever which is
raised when the brake is on.
12
Installing the Payload
CAUTION! Risk of product damage. The product must
only be operated with a minimum payload of 10 kg (22 lb).
Do not exceed the payload limit for the product of 25 kg (55
lb). Ensure that the payload has been correctly assessed.
Payload Assessment
It is critical for the correct and safe operation of the FE-55 that the
payload to be installed is assessed to meet the following criteria:
1.
Accurately calculate the total weight of the payload to be fitted to
the elevation unit. The total weight must be at least 10 kg (22 lb)
but not exceed 25 kg (55 lb).
FHR-35
Camera and
lens
8 kg (18 lb)
Ancillary
equipment
</=25 kg (55 lb)
Advertisement
Table of Contents
