Mounting The Camera (Optional Quickfit Adaptor); Fig 2.1 Optional Quickfit Adapter - Vinten Vision 250 Service Manual

Contents
8 Attach the slide plate to the camera or camera mounting plate under the approximate centre of the
camera's weight using both fixing screws (1). Position the screws as far apart as possible.
9 Set the platform level and engage the centre lock (3).
10 Push the slide plate and camera into the track in the platform, ensuring slide release
position.

Mounting the camera (optional Quickfit adaptor)

11 To mount the camera using the optional Quickfit adaptor, proceed as follows
11.1 If not already attached, secure the Quickfit adaptor
provided (5).
11.2 Free the Quickfit wedge
and operating the wedge release (3).
11.3 Fit the Quickfit wedge to the camera with the two screws
11.4 Insert the forward end of the wedge into the forward end of the adaptor, pushing against the
spring tension of the lock. Lower the rear of the wedge into the adaptor until an audible click indicates
that the wedge is engaged with the adaptor.
(7)
(6)
(5)
(1) from the adaptor by simultaneously pushing in on the safety catch

Fig 2.1 Optional Quickfit Adapter

First Previous
Page Page
(Fig 2.1):
(2) to the slide plate (4)
(7) provided.
Next Previous
Page View
(19) snaps into
with the two screws
(6)
(1)
(2)
(3)
(4)
15