Mounting The Camera (Optional Quickfit Adaptor) - Vinten Vision 10LF Maintenance Manual

Contents
(19)
(18)
(8)
Fig 2.1 Mounting the Camera (Optional Quickfit Adaptor)

Mounting the camera (optional Quickfit adaptor)

9 To mount the camera using the optional Quickfit adaptor, proceed as follows
9.1 If not already attached, secure the Quickfit Adaptor
provided (8).
9.2 Free the Quickfit wedge
(18) and operating the wedge release (17).
9.3 Fit the Quickfit wedge
9.4 Insert the forward end of the wedge into the forward end of the adaptor, pushing against the
spring tension of the lock. Lower the rear of the wedge into the adaptor until an audible click indicates
that the wedge is engaged with the adaptor.
(15) from the adaptor by simultaneously pushing in on the safety catch
(15) to the camera with the two screws provided (19).
First Previous
Page Page
(Fig
(16) to the slide plate (1)
Next Previous
Page View
(15)
(16)
(17)
(1)
2.1):
with the two screws
15