Table of Contents
Advertisement
Installation
Unpacking the FE-55
WARNING! Risk of personal injury or injury to others.
1.
DO NOT lift the elevation unit unaided. This product
weighs up to 48.6 kg (107.1 lb).
2.
DO NOT lift the product by the camera mounting plate.
WARNING! If the FE-55 has been received or subsequently
transported with the legs removed, these must be fitted
before any other installation work can be carried out. See
the section Fitting the Leg Assemblies on page 28.
1.
With the assistance of
another person, use the
two grab handles on the
sides of the FE-55 to
carefully lift it from the
transportation box.
2.
Remove all the other product components from the transportation
box.
3.
Ensure that all transportation packaging material and retaining
fixings are removed from the product components.
10
Assembling the FE-55
Fitting the Cable Management Net Accessory
The cable management net can be installed on the FE-55 to provide
stowage of additional cables or management of excessive cable
lengths and bundles.
1.
Fit the cable management net between the two rear legs of the
FE-55, securing in position with the four screws provided.
2.5 mm
Advertisement
Table of Contents
