Vinten FE-55 User Manual page 31

4.
With the FE-55 still tilted on the same side, fit one of the remaining
three leg assemblies into the empty leg housing position. Secure
the leg in position using the procedure shown in steps 2 and 3.
!
M6
M8
Steps 2 and 3
5.
Carefully tilt the FE-55 over onto the two fitted leg assemblies. Fit
the remaining two leg assemblies into the leg housings and secure
them in position using the procedure shown in steps 2 and 3.
!
M6
M8
6.
Carefully tilt the FE-55 back upright
to rest on all four castor wheels.
Maintenance
Steps 2 and 3
M6
M8
29