Fitting The Camera And Accessories - Vinten FE-55 User Manual

4.
Fit the three countersink screws provided through the mounting
holes in the side of the column. Tighten the screws fully to secure
the FHR-35 in position.
3 mm

Fitting the Camera and Accessories

WARNING! Before fitting equipment, refer to the installation
instructions supplied with the robotic head, camera and any
accessories. To ensure safe operation, the payload must be
correctly balanced following installation.
When the robotic head has been secured to the FE-55, the camera,
lens and any other accessories such as a prompter can be fitted.
WARNING! Ensure that all equipment being fitted has been
correctly assessed. See the section Payload Assessment
on page 12.
!
Installation
15