Fall Arrest Platform; Safety Precautions; Pipe Racks - JLG 1500SJ Operation And Safety Manual

INSTALLING OR REMOVING APPROVED ACCESSORIES OR CHANGING PLATFORM SIZE
REQUIRES RECALIBRATION OF THE BOOM CONTROL SYSTEM (SEE SERVICE AND MAIN-
TENANCE MANUAL).
7.1

FALL ARREST PLATFORM

NOTE: See the JLG External Fall Arrest System manual (PN 3128935) for
more detailed information.
The external fall arrest system is designed to provide a lanyard
attach point while allowing the operator to access areas outside
the platform. Exit/enter the platform through the gate area only.
The system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness
is required with lanyard not to exceed 6 ft (1.8 m) in length, that
limits the maximum arrest force to 900 lbs (408 kg) for the trans-
fastener type and 1350 lbs (612 kg) for the shuttle type fall arrest
system.

Safety Precautions

DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE THE PLATFORM. USE
CAUTION WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
3121261
7.2

PIPE RACKS

Pipe Racks provide a way to store pipe or conduit inside the plat-
form in order to prevent rail damage and optimize platform util-
ity. This accessory consists of two racks with adjustable straps to
secure the load in place.
– JLG Lift –
SECTION 7 - ACCESSORIES
7-3