Fall Arrest Platform; Pipe Racks - JLG E450AJ Operation And Safety Manual

SECTION 6 - ACCESSORIES
6.2

FALL ARREST PLATFORM

NOTE: Refer to JLG External Fall Arrest System manual (P/N-3128935)
for more detailed information.
The external fall arrest system is designed to provide a lanyard
attach point while allowing the operator to access areas outside
the platform. Exit/Enter the platform through the gate area only.
The system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness
is required with lanyard not to exceed 6 ft. (1.8 M) in length, that
limits the maximum arrest force to 900 lb (408 kg) for the trans-
fastener type and 1350 lb (612 kg) for the shuttle type fall arrest
system.
DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE OF PLATFORM. BE
CAREFUL WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
6-4
6.3

PIPE RACKS

Pipe Racks provide a way to store pipe or conduit inside the plat-
form in order to prevent rail damage and optimize platform util-
ity. This accessory consists of two racks with adjustable straps to
secure the load in place.
31215012