Trane IntelliPak 1 with Symbio 800 Installation, Operation And Maintenance Manual page 21

Figure 5. Unit base dimensions, SEH_, SFH_, SLH_, SSH_, SXH_ units (20 to 75 ton)
Note: Use the table that follows.
E
F1
F2 G
Unit Base Notes:
1. SEH_ — For 200/230 volt electric heat units, use hole "A" (3⅝" diameter).
2. SFH_ — For gas heat units, use hole "B" (1¼" diameter).
3. SLH_ and SSH_ — For steam or hot water heat units, use holes "A" (3⅝" steam
or hot water supply) and "B" (3" steam or hot water return).
4. SXH_ — In extended cabinet cooling only units, the holes are omitted
Table 7. Unit base dimensions, SEH_, SFH_, SLH_, SSH_, SXH_ units (20 to 75ton)—air cooled
Nom. tons A
20–30 16'–3 3/16" 2'–2 1/2"
40 & 50 19'–10 5/16" 2'–5"
60 19'–10 5/16" 2'–5"
70–75 19'–10 5/16" 2'–5"
H J K
15'–5 5/16" 16'–9 3/4" 8 13/16"
18'–11 11/16" Note 2 8 3/16"
18'–11 11/16" Note 2 8 3/16"
18'–11 11/16" Note 2 8 3/16"
Notes:
1. 5'–5 15/16" for SEH_ units or 7'–8 1/2" for
SFH_, SLH_, SSH_, SXH_ units.
2. 20'–1 3/4" for SFH_ "High Heat" units or
20'–6 3/4" for SFH_ "Low Heat" units.
Either is selectable in field for SL and SS
Return.
RT-SVX072D-EN
A
H
J
B C D
Relief
5 13/16" 5'–7" 3'–4 3/8"
7 1/16" 5'–7" 3'–4 3/8"
6 1/16" Note 1 4'–5 3/8"
6 1/16" Note 1 4'–5 3/8"
L
9 1/16"
9 1/16"
9 1/16"
9 1/16"
B
Holes
B
A
K
L
E F1
Fan Type
Return Relief Return
2'–9 15/16" 5 13/16" 8 1/4"
3'–1 1/2" 5 13/16" 8 1/4"
4'–2 1/2" 5 13/16" 8 1/4"
4'–2 1/2" 5 13/16" 8 1/4"
Dimensional Data
C
D
Electrical Entrance
G F2
Relief Return Relief
6'–6 15/16" 3' 5 13/16"
7'–8 3/16" 3'–4" 5 13/16"
7'–8 3/16" 4'–5" 5 13/16"
7'–8 3/16" 4'–5" 5 13/16"
Return
28 5/8"
32 15/16"
26 7/16"
26 7/16"
21