Table of Contents
Advertisement
T
C
I
ONNEAU
OVER
NSTALLATION
To install the Tonneau Cover, proceed as
follows:
1. Position the rolled up Tonneau Cover on
the truck bed and align it to the two
fastener locations at the front of the bed.
Fastener Locations
2. Using a #T50 Torx head driver, secure the
fasteners to the bed.
3. Lower the tailgate to the fully open position
before unrolling the Tonneau Cover.
4. Release the stowage straps used to secure
the Tonneau Cover in the rolled up position.
Release Stowage Strap
5. Roll the Tonneau Cover rearward toward the
back of the truck bed.
Roll Tonneau Cover Rearward
GETTING TO KNOW YOUR VEHICLE
6. Position both Tonneau Cover latches over
the locking mechanisms (one on each side
of the truck bed), making sure the plastic
retainer is correctly seated in the forward
part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
105
2
Advertisement
Table of Contents
