Download Print this page

Jeep Gladiator 2020 Owner's Manual

Jeep Gladiator 2020 Owner's Manual

Hide thumbs Also See for Gladiator 2020:

User manual (303 pages)

,

Owner's manual (480 pages)

Table Of Contents

Table of Contents

Advertisement

Quick Links

All-New Gladiator

2 0 2 0

O W N E R ' S M A N U A L

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the Gladiator 2020 and is the answer not in the manual?

Questions and answers

jeffrey kirkelie

February 20, 2025

After Adjusting my parking brakes on my manual 2023 Gladiator Rubicon if the parking brake light on the instrument panel is off until I slightly pull up the lever about 1 inch or less then it comes on. Is that a good indicator that my parking brake is adjusted ok and not too tightly adjusted? All the clicks I hear to set the brake are only 5 or 6 and no more but the jeep will not move at all even on a good incline. When I release the parking brake the jeep will roll down immediately. Thanks Jeff

0

1 comments:

Mr. Anderson

May 14, 2025

Yes, the parking brake on a 2020 Jeep Gladiator Rubicon is likely properly adjusted if the warning light comes on when the lever is pulled slightly and the vehicle does not move on an incline. The light indicates the parking brake is applied, and holding the vehicle confirms effective brake function.

This answer is automatically generated

0

Summary of Contents for Jeep Gladiator 2020

Page 1 All-New Gladiator 2 0 2 0 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation VEHICLES SOLD IN CANADA of features and equipment that are either standard or With respect to any vehicles sold in Canada, the name optional on this vehicle. This manual may also include FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ....................................13 GETTING TO KNOW YOUR VEHICLE ............................16 GETTING TO KNOW YOUR INSTRUMENT PANEL ......................164 SAFETY ......................................... 195 STARTING AND OPERATING ..............................281 IN CASE OF EMERGENCY ................................388 SERVICING AND MAINTENANCE .............................436 TECHNICAL SPECIFICATIONS ..............................500 MULTIMEDIA ....................................510 CUSTOMER ASSISTANCE ................................646 INDEX ........................................652 20_JT_OM_EN_USC...
Page 4 INTRODUCTION  REMOTE STARTING SYSTEM — IF EQUIPPED ..26 How To Use Remote Start ..........27   INTRODUCTION ..............13 Remote Start Cancel Message — If Equipped ...28   HOW TO USE THIS MANUAL ........14 To Enter Remote Start Mode........28 ...
Page 5  DOORS ................33  MIRRORS ................61 Manual Door Locks............34 Inside Day/Night Mirror — If Equipped ....61   Power Door Locks — If Equipped ......35 Automatic Dimming Mirror — If Equipped ....61   Keyless Enter-N-Go — Passive Entry Outside Mirrors .............62 ...
Page 6  CLIMATE CONTROLS ............72  SOFT TOP — IF EQUIPPED ..........110 Manual Climate Control Overview ......72 Lowering The Soft Top ..........112   Automatic Climate Controls Overview .....76 Soft Top Rear Window Storage Bag ......117   Climate Control Functions ...........82 Raising The Soft Top ...........119 ...
Page 7  INTERNAL EQUIPMENT ..........142 Instrument Cluster Display Selectable Items...170  Storage................142 Instrument Cluster Display Menu Items....171   Cupholders ..............148 Battery Saver On, Battery Saver Mode Message,   Electrical Power Outlet ..........149 And Electrical Load Reduction Actions  Power Inverters — If Equipped .......150 (If Equipped) ..............176 ...
Page 8 SAFETY STARTING AND OPERATING  SAFETY FEATURES ............195  STARTING THE ENGINE ..........281 Anti-Lock Brake System (ABS) .........195 Manual Transmission — If Equipped ......281   Electronic Brake Control (EBC) System ....196 Automatic Transmission — If Equipped ....281   ...
Page 9 Axle Lock (Tru-Lok) — Rubicon Models....305  SPEED CONTROL — IF EQUIPPED ......318  Electronic Sway Bar Disconnect — If Equipped ..306 To Activate..............318   Off Road+ — If Equipped ..........308 To Set A Desired Speed..........319    ELECTRO-HYDRAULIC POWER STEERING.....309 To Vary The Speed Setting .........319 ...
Page 10 Display Warnings And Maintenance .......333  PARKVIEW REAR BACK UP CAMERA ......356  Precautions While Driving With ACC .....335  TRAILCAM SYSTEM — IF EQUIPPED......358  General Information............338  REFUELING THE VEHICLE ..........360  Normal (Fixed Speed) Cruise Control Mode ..339 Fuel Filler Cap ..............360 ...
Page 11 IN CASE OF EMERGENCY  TOWING A DISABLED VEHICLE.........432 Four–Wheel Drive Models .........433   HAZARD WARNING FLASHERS ........388 Emergency Tow Hooks — If Equipped ....434   ASSIST AND SOS SYSTEM — IF EQUIPPED ....388  ENHANCED ACCIDENT RESPONSE General Information............393 SYSTEM (EARS) ...............435 ...
Page 12  DEALER SERVICE ............444  DEPARTMENT OF TRANSPORTATION UNIFORM Engine Oil ..............444 TIRE QUALITY GRADES ..........488  Engine Oil Filter............446 Treadwear..............488   Engine Air Cleaner Filter..........446 Traction Grades............489   Accessory Drive Belt Inspection........448 Temperature Grades ...........489   Air Conditioner Maintenance........449 ...
Page 13  FUEL REQUIREMENTS ..........503  SAFETY AND GENERAL INFORMATION ....553 3.6L Engine ..............503 Safety Guidelines ............553   Reformulated Gasoline ..........503  UCONNECT 3 WITH 5-INCH DISPLAY......554  Materials Added To Fuel..........503 Introduction..............554   Gasoline/Oxygenate Blends ........504 Radio Mode ..............556 ...
Page 14 CUSTOMER ASSISTANCE  UCONNECT VOICE RECOGNITION QUICK TIPS...625 Introducing Uconnect ..........625   SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR Get Started ..............626  VEHICLE ................646 Basic Voice Commands ..........627  Prepare For The Appointment........646 Radio ................628   Prepare A List...............646 Media................629 ...
Page 15: Introduction
INTRODUCTION you drive. As with other vehicles of this type, failure to INTRODUCTION operate this vehicle correctly may result in loss of control or Dear Customer, congratulations on selecting your new a collision. Refer to the “Driving Tips” in “Starting and Oper- vehicle.
Page 16: How To Use This Manual
14 INTRODUCTION the trim level, engine, and version that you have purchased. The detailed index at the back of this Owner's Manual Any content introduced throughout the Owner’s Informa- contains a complete listing of all subjects. tion that may or may not be applicable to your vehicle will be Symbols identified with the wording “If Equipped”.
Page 17: Campers
INTRODUCTION CAMPERS This vehicle is NOT recommended for slide-in camper appli- cations. WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against oper- ating procedures that could result in a collision, bodily injury, and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 18: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE VEHICLE USER GUIDE — IF EQUIPPED Access your Owner’s Information right through your Uconnect 4C or 4C NAV touchscreen system (if equipped). To access the Vehicle User Guide on your Uconnect touch- screen, press the Uconnect Apps button. From there, press the Vehicle User Guide icon on your touchscreen.
Page 19 GETTING TO KNOW YOUR VEHICLE Pre-Installed Features Features/Benefits • Your User Guide — Updated in real-time • Pre-installed on your Uconnect touchscreen radio • Touchscreen convenience • Enhanced search and browsing capability • Maintenance schedules and information • Robust NAV application (if equipped) •...
Page 20: Keys
18 GETTING TO KNOW YOUR VEHICLE (RKE) system consists of a key fob with a mechanical key and KEYS Keyless Enter-N-Go feature. Key Fob NOTE: The key fob may not be detected by the vehicle if it is located next to a mobile phone, laptop or other electronic device; these devices may block the key fob’s wireless signal.
Page 21 GETTING TO KNOW YOUR VEHICLE NOTE: Flash Lights With Remote Lock With the ignition in ON/RUN position and with the vehicle The turn signal lights will flash to acknowledge the lock doors open, the lock button will be disabled, and only the signal.
Page 22 20 GETTING TO KNOW YOUR VEHICLE The Panic Alarm will stay on for three minutes unless you NOTE: turn it off by either pushing the panic button a second time Perchlorate Material – special handling may apply. See or drive the vehicle at a speed of 2 mph (4 km/h) or greater. www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
Page 23 GETTING TO KNOW YOUR VEHICLE 2. Remove the depleted battery by inserting a small Programming Additional Key Fobs flat-blade screwdriver into the battery removal slot and Programming the key fob may be performed by an autho- sliding the battery forward and upward being careful not rized dealer.
Page 24 22 GETTING TO KNOW YOUR VEHICLE NOTE: Le présent appareil est conforme aux CNR d`Innovation, Science and Economic Development applicables aux appar- • When having the Sentry Key Immobilizer System eils radio exempts de licence. L'exploitation est autorisée aux serviced, bring all vehicle keys with you to an authorized deux conditions suivantes: dealer.
Page 25: Ignition Switch
GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH Keyless Enter-N-Go — Ignition This feature allows the driver to operate the ignition switch with the push of a START/STOP Ignition Button as long as the key fob is in the passenger compartment. The START/STOP Ignition Button has several operating modes that are labeled and will illuminate when in position.
Page 26: Vehicle On Message
24 GETTING TO KNOW YOUR VEHICLE WARNING! (Continued) • Driving position. • Do not leave children or animals inside parked vehicles • All electrical devices are available. in hot weather. Interior heat build-up may cause serious injury or death. START •...
Page 27: Depleted Key Fob Battery
GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! (Continued) The power window switches will remain active up to ten • Do not leave the key fob in or near the vehicle, or in a minutes after the ignition is placed in the OFF position. location accessible to children, and do not leave the Opening either front door will cancel this feature.
Page 28: Remote Starting System - If Equipped
26 GETTING TO KNOW YOUR VEHICLE NOTE: REMOTE STARTING SYSTEM — IF EQUIPPED A low key fob battery condition may be indicated by a This system uses the key fob to start the engine message in the instrument cluster display, or by the LED conveniently from outside the vehicle while still light on the key fob.
Page 29: How To Use Remote Start
GETTING TO KNOW YOUR VEHICLE • Vehicle alarm system indicator flashing How To Use Remote Start • Ignition in STOP/OFF position • Push the Remote Start button on the key fob twice within five seconds. Pushing the Remote Start button a third time •...
Page 30: Remote Start Cancel Message - If Equipped
28 GETTING TO KNOW YOUR VEHICLE NOTE: Remote Start Cancel Message — If Equipped • If an engine fault is present or fuel level is low, the vehicle The following messages will display in the instrument will start and then shut down in 10 seconds. cluster if the vehicle fails to remote start or exits remote start prematurely: •...
Page 31: To Exit Remote Start Mode And Drive The Vehicle
GETTING TO KNOW YOUR VEHICLE To Exit Remote Start Mode And Drive The Vehicle General Information Before the end of 15-minute cycle, push and release the The following regulatory statement applies to all Radio unlock button on the key fob to unlock the doors, or unlock Frequency (RF) devices equipped in this vehicle: the vehicle using Keyless Enter-N-Go —...
Page 32: Sentry Key
30 GETTING TO KNOW YOUR VEHICLE La operación de este equipo está sujeta a las siguientes dos After switching the ignition switch to the ON/RUN position, condiciones: the vehicle security light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it 1.
Page 33: Customer Key Programming
GETTING TO KNOW YOUR VEHICLE When having the Sentry Key Immobilizer System serviced, Customer Key Programming bring all vehicle keys with you to an authorized dealer. Programming key fobs may be performed at an authorized dealer. General Information The following regulatory statement applies to all Radio Replacement Keys Frequency (RF) devices equipped in this vehicle: NOTE:...
Page 34: Vehicle Security Alarm - If Equipped
32 GETTING TO KNOW YOUR VEHICLE La operación de este equipo está sujeta a las siguientes dos To Arm The System condiciones: Follow these steps to arm the Vehicle Security Alarm: 1. es posible que este equipo o dispositivo no cause interfer- 1.
Page 35: To Disarm The System
GETTING TO KNOW YOUR VEHICLE If the Vehicle Security Alarm is armed and the battery To Disarm The System becomes disconnected, the Vehicle Security Alarm will The Vehicle Security Alarm can be disarmed using any of the remain armed when the battery is reconnected; the exterior following methods: lights will flash, and the horn will sound.
Page 36: Manual Door Locks
34 GETTING TO KNOW YOUR VEHICLE Manual Door Locks WARNING! • For personal security reasons and safety in a collision, All doors are equipped with an interior rocker-type door lock the vehicle doors when you drive, as well as when lock lever.
Page 37: Power Door Locks - If Equipped
GETTING TO KNOW YOUR VEHICLE Power Door Locks — If Equipped WARNING! • For personal security reasons and safety in a collision, The power door lock switch is located on each front door lock the vehicle doors when you drive, as well as when panel.
Page 38: Keyless Enter-N-Go - Passive Entry (If Equipped)
36 GETTING TO KNOW YOUR VEHICLE • If wearing gloves on your hands, or if it has been raining/ Keyless Enter-N-Go — Passive Entry (If Equipped) snowing on the Passive Entry door handle, the unlock The Passive Entry system is a feature that allows you to lock sensitivity can be affected, resulting in a slower response and unlock the vehicle’s door(s) without having to push the time.
Page 39 GETTING TO KNOW YOUR VEHICLE NOTE: FOBIK-Safe only executes in vehicles with Passive Entry. If “1st Press Of Key Fob Unlock” is programmed, all doors There are three situations that trigger a FOBIK-Safe search in will unlock when you grab a hold of the front driver’s door any Passive Entry vehicle: handle.
Page 40 38 GETTING TO KNOW YOUR VEHICLE • The doors are manually locked using the door lock levers. NOTE: When pushing the door handle lock button, DO NOT grab • Three attempts are made to lock the doors using the power the door handle.
Page 41 GETTING TO KNOW YOUR VEHICLE • If Passive Entry is disabled using the Uconnect System, the Le présent appareil est conforme aux CNR d`Innovation, key protection described in “Preventing Inadvertent Science and Economic Development applicables aux appar- Locking Of Passive Entry Key Fob In Vehicle” remains eils radio exempts de licence.
Page 42: Automatic Door Locks - If Equipped
40 GETTING TO KNOW YOUR VEHICLE Automatic Door Locks — If Equipped The Automatic Door Lock feature default condition is enabled. When enabled, the door locks will lock automati- cally when the vehicle's speed exceeds 15 mph (24 km/h). The Automatic Door Lock feature can be enabled or disabled by an authorized dealer per written request of the customer.
Page 43: Front Door Removal
GETTING TO KNOW YOUR VEHICLE WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection Door Lock system is engaged (locked). NOTE: Always use this device when carrying children. After engaging the child lock on both rear doors, check for effec- tive engagement by trying to open a door with the internal handle.
Page 44 42 GETTING TO KNOW YOUR VEHICLE To remove the front doors, proceed as follows: CAUTION! • Hinge pins can break if overtightened during door 1. Roll down the glass window to prevent any damage. reinstall (Max Torque: 5.88 ft·lb / 8 N·m). Refer to 2.
Page 45 GETTING TO KNOW YOUR VEHICLE 3. Remove the plastic wiring access door under the instru- 4. Pull up on the red locking tab to unlock the wiring ment panel by sliding the plastic panel along the door harness. frame toward the seats until the tabs are detached. Closed Wiring Harness Wiring Access Door 1 —...
Page 46 44 GETTING TO KNOW YOUR VEHICLE 5. Push and hold down the black security tab under the 7. With the door in the open position, remove the check bolt wiring harness, and lift the harness lever into the open from the door check attachment on the bodyside (using a position.
Page 47: Rear Door Removal
GETTING TO KNOW YOUR VEHICLE To reinstall the door(s), perform the previous steps in the reverse order. NOTE: The upper hinge has a longer pin, which can be used to assist in guiding the door into place when reinstalling. When rein- stalling the door check arm attachment bolt, bolt torque should be between 11.76 ft·lb / 16 N·m and 27.9 ft·lb / 38 N·m.
Page 48 46 GETTING TO KNOW YOUR VEHICLE CAUTION! • Hinge pins can break if overtightened during door reinstall (Max Torque: 5.88 ft·lb / 8 N·m). Refer to “Off-Road Driving Tips” in “Starting And Operating” for further information. • Do not over-tighten Torx fasteners. Damage to the vehicle’s parts will occur.
Page 49 GETTING TO KNOW YOUR VEHICLE 4. Pry open and remove the plastic wiring access door from 5. Unplug the wiring connector. the bottom of the B-Pillar. NOTE: Squeeze the tab on the base of the wiring harness. This will unlock the connector tab, allowing the wiring connector to be unplugged.
Page 50 48 GETTING TO KNOW YOUR VEHICLE 6. With the door in the open position, remove the check bolt 7. With the door open, lift the door with the help of another from the door check attachment on the bodyside (using a person, to clear the hinge pins from their hinges and #T40 Torx head driver).
Page 51: Seats
GETTING TO KNOW YOUR VEHICLE body pressure, move forward and rearward on the seat to be SEATS sure that the seat adjusters have latched. Seats are a part of the Occupant Restraint System of the vehicle. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 52 50 GETTING TO KNOW YOUR VEHICLE Manual Seat Height Adjustment Front Seatback Recline The driver's seat height can be raised or lowered by using the To recline the seat, pull on the recline strap and lean forward ratcheting handle, located on the outboard side of the seat. or rearward, depending on the direction you would like the Pull upward on the handle to raise the seat, push downward seatback to move.
Page 53: Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE Lumbar Support The Lumbar Support Control knob is located on the outboard side of the front driver seat. Rotate the control forward to increase and rearward to decrease the desired amount of lumbar support. Heated Seat Control Buttons •...
Page 54: 60/40 Split Folding Rear Seat
52 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! (Continued) • The engine must be running for the heated seats to operate. • Do not place anything on the seat or seatback that insu- • The level of heat selected will stay on until the operator lates against heat, such as a blanket or cushion.
Page 55 GETTING TO KNOW YOUR VEHICLE NOTE: Folding The Rear Seats • Be sure that the front seats are fully upright and positioned To fold down the rear seat, pull the release strap located on forward. This will allow the rear seat to fold down easily. the upper outboard side of the rear seat.
Page 56 54 GETTING TO KNOW YOUR VEHICLE NOTE: • The vehicle is equipped with stow clips located on the lower trim, next to the rear seats. Use these clips to hold the seat belt out of the path of the seat back when it is being folded and raised.
Page 57: Rear Seat Stadium Position
GETTING TO KNOW YOUR VEHICLE 2. Raise the seat bottom upward into the Stadium Position. Rear Seat Stadium Position The rear seat bottoms can be folded upward into the Stadium Position to create more storage space on the vehicle’s floor, and to access the under seat storage bins (if equipped).
Page 58: Rear Seat Armrest - If Equipped
56 GETTING TO KNOW YOUR VEHICLE Rear Seat Armrest — If Equipped WARNING! Be certain that the seatback is securely locked into The center part of the rear seat can also be used as a rear position. If the seatback is not securely locked into armrest with cupholders.
Page 59: Front Head Restraints
GETTING TO KNOW YOUR VEHICLE Front Head Restraints To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button located on the base of the head restraint, and push downward on the head restraint. The release button does not need to be pushed to adjust the head restraint.
Page 60: Rear Head Restraints
58 GETTING TO KNOW YOUR VEHICLE WARNING! (Continued) • ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the reinstallation instructions above prior to operating the vehicle or occupying a seat. NOTE: Do not reposition the head restraint 180 degrees to the incor- rect position in an attempt to gain additional clearance to the back of the head.
Page 61: Steering Wheel
GETTING TO KNOW YOUR VEHICLE To reinstall the head restraint, put the head restraint posts STEERING WHEEL into the holes and push downward. Then, adjust it to the Tilt/Telescoping Steering Column appropriate height using the adjustment button. Refer to “Occupant Restraint Systems” in “Safety” for information on The Tilt/Telescoping Steering Column feature allows the child seat tether routing.
Page 62: Heated Steering Wheel - If Equipped
60 GETTING TO KNOW YOUR VEHICLE To lengthen or shorten the steering column, pull the steering • Push the heated steering wheel button once to turn the wheel outward or push it inward as desired. heating element on. • Push the heated steering wheel button a second time to To lock the steering column in position, pull the Tilt/Tele- turn the heating element off.
Page 63: Mirrors
GETTING TO KNOW YOUR VEHICLE WARNING! (Continued) • Do not place anything on the steering wheel that insu- lates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat. MIRRORS Inside Day/Night Mirror —...
Page 64: Outside Mirrors
62 GETTING TO KNOW YOUR VEHICLE Outside Mirrors The Outside Mirrors are located on the front driver and passenger side doors, and are adjusted manually or by power adjustment (if equipped). To receive maximum benefit, adjust the Outside Mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.
Page 65: Power Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE The Power Mirror controls consist of mirror select buttons WARNING! and a four-way mirror control switch. To adjust a mirror, Vehicles and other objects seen in the passenger side push either the L (left) or R (right) button to select the mirror convex mirror will look smaller and farther away than they that you want to adjust.
Page 66: Vanity Mirrors
64 GETTING TO KNOW YOUR VEHICLE instrument panel lights, instrument panel light dimming, Vanity Mirrors interior lights, and fog lights (if equipped). Vanity Mirrors are located on the sun visors. To use the mirrors, rotate the sun visor down and swing the mirror cover upward.
Page 67: High/Low Beam Switch
GETTING TO KNOW YOUR VEHICLE any position other than PARK (Automatic Transmission), or when the vehicle begins to move (Manual Transmission). NOTE: The DRLs, on the same side of the vehicle as the active turn signal, will turn off automatically when a turn signal is in operation and turn on again when the turn signal is not oper- ating.
Page 68: Front Fog Lights - If Equipped
66 GETTING TO KNOW YOUR VEHICLE automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the head- lights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.
Page 69: Lane Change Assist - If Equipped
GETTING TO KNOW YOUR VEHICLE Lane Change Assist — If Equipped The Lane Change Assist feature will flash the turn signal (left or right) three times to indicate to other drivers that you are changing lanes. Tap the multifunction lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off.
Page 70: Interior Lights
68 GETTING TO KNOW YOUR VEHICLE When a door is open and the interior lights are on, rotating INTERIOR LIGHTS the dimmer control to the extreme bottom position will cause Courtesy Lights all the interior lights to turn off. This is also known as “Party” mode because it allows the doors to stay open for extended The Interior Courtesy Lights will turn on when the front periods of time without discharging the vehicle’s battery.
Page 71: Windshield Wipers And Washers
GETTING TO KNOW YOUR VEHICLE With the parking lights or headlights on, rotating the right Windshield Wiper Operation dimmer control upward will increase the brightness of the Rotate the end of the lever upward to the first detent past the instrument panel lights.
Page 72 70 GETTING TO KNOW YOUR VEHICLE CAUTION! In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
Page 73 GETTING TO KNOW YOUR VEHICLE Windshield Washers Mist Feature To use the washer, pull the lever toward you and hold until Push upward on the wiper lever to activate a single wipe to desired spray is reached. If the lever is pulled while in the clear off-road mist or spray from a passing vehicle.
Page 74: Climate Controls
72 GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS The Climate Control System allows you to regulate the temperature, air flow, and direction of air circulating throughout the vehicle. The controls are located on the touchscreen and on the instrument panel below the radio. Manual Climate Control Overview The Manual Climate Controls System is an air conditioning and heating system designed to make the vehicle comfort-...
Page 75 GETTING TO KNOW YOUR VEHICLE Manual Climate Control Descriptions Icon Description A/C Button — If Equipped Push the A/C button to engage the Air Conditioning. An LED illuminates when the A/C system is engaged. MAX A/C Setting — If Equipped Turn the temperature control knob to the MAX A/C (Air Conditioning) position to engage the coldest temperature setting.
Page 76 74 GETTING TO KNOW YOUR VEHICLE Icon Description Blower Control Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position. Modes Control Turn the knob to adjust airflow distribution.
Page 77 GETTING TO KNOW YOUR VEHICLE Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield.
Page 78: Automatic Climate Controls Overview
76 GETTING TO KNOW YOUR VEHICLE Automatic Climate Controls Overview The Automatic Climate Control System is designed to make the vehicle feel comfortable in all types of weather. The Automatic Climate Controls system allows you to adjust heat and air conditioning settings by pressing buttons on the touchscreen. Uconnect 4 With 7–inch Display Automatic Climate Controls...
Page 79 GETTING TO KNOW YOUR VEHICLE Uconnect 4C/4C NAV With 8.4–inch Display Automatic Climate Controls Specific instructions on how to adjust the heat and air conditioning settings are detailed in the following Automatic Climate Control Descriptions chart.
Page 80 78 GETTING TO KNOW YOUR VEHICLE Automatic Climate Control Descriptions Icon Description MAX A/C Button Press to change to the coldest setting, the indicator illuminates when MAX A/C is on. Pressing the button again causes the MAX A/C operation to switch into manual mode and the MAX A/C indicator turns off.
Page 81 GETTING TO KNOW YOUR VEHICLE Icon Description Front Defrost Button Press and release the touchscreen button, or push and release the button on the faceplate, to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes from the windshield and side window demist outlets.
Page 82 80 GETTING TO KNOW YOUR VEHICLE Icon Description SYNC Button Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated when this feature is enabled. SYNC is used to synchronize the passenger temperature setting with the driver temperature setting.
Page 83 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.
Page 84: Climate Control Functions
82 GETTING TO KNOW YOUR VEHICLE MAX A/C Climate Control Functions MAX A/C sets the control for maximum cooling perfor- A/C (Air Conditioning) mance. The A/C (Air Conditioning) button allows the operator to Press and release to toggle between MAX A/C and the prior manually activate or deactivate the air conditioning system.
Page 85: Automatic Temperature Control (Atc) - If Equipped
GETTING TO KNOW YOUR VEHICLE feature. Refer to the “Uconnect Settings” in “Multimedia” Automatic Temperature Control (ATC) — If Equipped for further information. Automatic Operation To provide you with maximum comfort in the Automatic 1. Push the AUTO button on the faceplate, or the AUTO mode during cold start-ups, the blower fan will remain on button on the touchscreen on the Automatic Temperature low until the engine warms up.
Page 86 84 GETTING TO KNOW YOUR VEHICLE Winter Operation CAUTION! To ensure the best possible heater and defroster perfor- Failure to follow these cautions can cause damage to the mance, make sure the engine cooling system is functioning heating elements: properly and the proper amount, type, and concentration of •...
Page 87: Power Windows - If Equipped
GETTING TO KNOW YOUR VEHICLE POWER WINDOWS — IF EQUIPPED Operating Tips Chart The power windows feature allows for movement of the WEATHER CONTROL SETTINGS windows with the push of a button. The power window Set the mode control to switches are located on the instrument panel below the on, and blower on high.
Page 88: Auto-Down Feature
86 GETTING TO KNOW YOUR VEHICLE Auto-Down Feature The driver door power window switch and the front passenger door power window switch have an Auto-Down feature. Push the window switch down, past the detent, and release and the window will go down automatically. To open the window part way, push the window switch down briefly, without going past the detent, and release it when you want the window to stop.
Page 89: Dual Top - If Equipped
GETTING TO KNOW YOUR VEHICLE DUAL TOP — IF EQUIPPED If your vehicle is equipped with a Dual Top, the soft top system will be provided in a separate box located in the bed of the vehicle for shipping purposes only. NOTE: The soft top and the hard top are to be used independently.
Page 90: Removing The Hard Top
88 GETTING TO KNOW YOUR VEHICLE 4. If equipped, remove the lower interior soft trim panel Removing The Hard Top attached by the hook-and-loop fastener. 1. Remove both front panels. Refer to “Front Panel(s) Removal” in “Freedom Top Three-Piece Modular Hard Top —...
Page 91 GETTING TO KNOW YOUR VEHICLE 6. Remove the four Torx head fasteners that secure the hard 7. Locate the wire harness on the left rear inside corner of top to the back of the vehicle cab using the #T50 Torx the vehicle.
Page 92 90 GETTING TO KNOW YOUR VEHICLE 8. To release the wire harness, pull back on the red latch, then push down on the black button while pulling the harness out. Push Black Button To Release 9. Remove the hard top from the vehicle. Install edge protectors and place the hard top on a soft surface to Pull Back On Red Latch prevent damage.
Page 93: Installing The Hard Top
GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! (Continued) When reinstalling the interior soft trim panel: • The hard top is not designed to carry any additional • Be sure the panel is centered so that there is an even gap on loads, such as after-market roof racks, spare tires, both sides.
Page 94: Installing The Soft Top
92 GETTING TO KNOW YOUR VEHICLE Installing The Soft Top Torque Specification For Maximum Minimum NOTE: Torx Fastener • The following procedures are for first time set up only. For 119.5 in-lbs 150.5 in-lbs 106.2 in-lbs future soft top procedures, refer to “Soft Top — If 13.5 N·m 17.0 N·m 12.0 N·m...
Page 95 GETTING TO KNOW YOUR VEHICLE 4. Remove the storage cover on the quarter trim. Use the 5. Tuck the wire harness inside the storage compartment. emergency key blade to pry the cover open. Correct Placement Of Wire Harness Pry Open Storage Cover...
Page 96 94 GETTING TO KNOW YOUR VEHICLE NOTE: 6. Install the door frames. Start with both front doors, Ensure the wire harness is not tucked under the belt rail or followed by both rear doors. Refer to “Door Frame Instal- between the belt rail and the door rail. lation”...
Page 97 GETTING TO KNOW YOUR VEHICLE 9. Using the provided #T50 Torx head driver and ratchet, CAUTION! install and tighten the Torx fasteners by turning them Do not overtighten Torx fasteners. You can strip the clockwise. Secure them until they are snug, being careful fasteners if they are overtightened.
Page 98: Removing The Soft Top
96 GETTING TO KNOW YOUR VEHICLE 10. Before driving the vehicle with the top in the Sunrider® Removing The Soft Top position, ensure the top is secured with the provided 1. Fully lower the soft top. Refer to “Lowering The Soft Top” hook-and-loop fasteners.
Page 99 GETTING TO KNOW YOUR VEHICLE 3. Utilizing two people, lift the soft top up and away from the vehicle, careful to avoid the vehicle’s sport bar and trim. Store the soft top in a safe, clean, and dry location. 4. Remove the door frames. The rear door frames must be removed before the front door frames.
Page 100: Freedom Top Three-Piece Modular Hard Top - If Equipped
98 GETTING TO KNOW YOUR VEHICLE FREEDOM TOP THREE-PIECE MODULAR HARD TOP CAUTION! (Continued) — IF EQUIPPED • The front panel(s) must be positioned properly to ensure sealing. Improper installation can cause water to CAUTION! leak into the vehicle’s interior. •...
Page 101: Freedom Top Storage Bag
GETTING TO KNOW YOUR VEHICLE 3. Unlatch the left side header panel latch located at the top Freedom Top Storage Bag of the windshield. Vehicles equipped with a Freedom Top Modular Hard Top come with a Freedom Top storage bag that allows you to store your Freedom Top panels.
Page 102 100 GETTING TO KNOW YOUR VEHICLE 1. Insert the left side Freedom Top panel into the bag with 2. Unfold the black panel divider (ensure the divider is the latches facing upward. laying flat). Left Panel — Latches Facing Upward Fold Divider Over Left Panel...
Page 103 GETTING TO KNOW YOUR VEHICLE 3. Insert the right side Freedom Top panel into the bag with 4. Unfold the outer flap and zip the Freedom Top bag the latches facing downward. closed. Right Panel — Latches Facing Downward Storage Bag Closed NOTE: 5.
Page 104: Front Panel(S) Installation
102 GETTING TO KNOW YOUR VEHICLE 3. Using the provided #T50 Torx head driver and ratchet, Front Panel(s) Installation remove the two Torx head fasteners that secure the hard 1. Set the right side panel on the windshield frame with the top at the B-pillar (near the top of the front doors) on each locating pin in the front receiver mounting hole, followed side.
Page 105 GETTING TO KNOW YOUR VEHICLE 4. If equipped, remove the rear lower interior soft trim 6. Remove the four Torx head fasteners that secure the hard panel attached by a hook-and-loop fastener. top to the back of the vehicle cab using the #T50 Torx head driver.
Page 106 104 GETTING TO KNOW YOUR VEHICLE 7. Locate the wire harness on the left rear inside corner of the vehicle. To access the harness, remove the plastic cover by pushing on the side of the cover and sliding it off. NOTE: Do not force open;...
Page 107: Rear Hard Top Installation
GETTING TO KNOW YOUR VEHICLE 9. Remove the hard top from the vehicle. Install the edge NOTE: protectors and place the hard top on a soft surface to When reinstalling the interior soft trim panel: prevent damage. • Be sure the panel is centered so that there is an even gap on both sides.
Page 108: Door Frame
106 GETTING TO KNOW YOUR VEHICLE DOOR FRAME Door Frame Removal NOTE: WARNING! The rear door frames must be removed first, followed by the • Do not drive your vehicle on public roads with the door front door frames. frame(s) removed as you will lose the protection that they can provide.
Page 109 GETTING TO KNOW YOUR VEHICLE 2. Once all the way loosened, remove the Torx head fasteners by pulling downward. NOTE: The fasteners will not fall out once completely loose, as they are held in place by an internal mechanism. Step Three 4.
Page 110: Door Frame Installation
108 GETTING TO KNOW YOUR VEHICLE Door Frame Installation NOTE: The door frames (if equipped with a soft top) can be installed when the doors are attached or removed. 1. Install the front door frame first. 2. Ensure the windshield is in the “up” position. Carefully place the front door frame in the rubber seal at the top of the windshield, and line up the holes for the Torx head fasteners (two for each door).
Page 111 GETTING TO KNOW YOUR VEHICLE 4. Set the rear door frame pin into the hole on top of the body side, just behind the rear door opening. 5. Carefully position the top of the door frame onto the rear belt rail and the rear of the front door frame, making sure the rubber seals lay flat.
Page 112: Soft Top - If Equipped
110 GETTING TO KNOW YOUR VEHICLE If the temperature is below 72°F (24°C) and/or the top has SOFT TOP — IF EQUIPPED been folded down for a period of time, the top will appear to WARNING! have shrunk when you raise it, making it difficult to put up. This is caused by a natural contraction of the vinyl or acrylic •...
Page 113 GETTING TO KNOW YOUR VEHICLE CAUTION! (Continued) CAUTION! (Continued) • Refer to “Appearance Care For Fabric Top Models” in Failure to follow these cautions may cause interior water “Bodywork” in “Servicing And Maintenance” for damage, stains, or mildew on the top material: further information.
Page 114: Lowering The Soft Top
112 GETTING TO KNOW YOUR VEHICLE Lowering The Soft Top Side View Top And Components 1 —#1 Bow 6 — Rear Window Vertical Retainer 2 —#2 Bow 7 — Quarter Panel Cover Assembly 3 — #3 Bow 8 — Quarter Panel Lower Retainer 4 —...
Page 115 GETTING TO KNOW YOUR VEHICLE Remove The Rear Window: 1. Use the two straps located on the bottom of each side of the rear window to remove the right and left vertical retainers, as well as the lower center retainer. Remove Lower Center Retainer Step One (Right Side Shown)
Page 116 114 GETTING TO KNOW YOUR VEHICLE 2. While keeping the rear window level, slide it outward in Remove The Right And Left Quarter Panel Cover Assem- blies: either direction until it is completely separate from its retainer. Do not pull downward while removing the 1.
Page 117 GETTING TO KNOW YOUR VEHICLE 3. Pull the quarter panel cover assembly up and out from Lowering The Soft Top Into The Sunrider® Position: the bottom, then pull it down and away from the vehicle 1. After removing the rear window and quarter panel cover to remove.
Page 118 116 GETTING TO KNOW YOUR VEHICLE 4. From both the left and right sides, lift up on the #1 Bow 5. Move to the side of the vehicle and use the side link to of the soft top to begin the operation. It is best to utilize fold the soft top rearward.
Page 119: Soft Top Rear Window Storage Bag
GETTING TO KNOW YOUR VEHICLE NOTE: Soft Top Rear Window Storage Bag Secure the top in this position by using the two To safely store the soft top rear window, proceed as follows: hook-and-loop fasteners provided in the center console. NOTE: The rear belt rail, once removed from the rear window, does not store in the soft top rear window storage bag.
Page 120 118 GETTING TO KNOW YOUR VEHICLE 2. Fold the divider upward, covering the rear window. 3. Lay the first quarter panel cover assembly all the way to the right side and the second quarter panel cover assembly on the left side. Secure both using the two hook-and-loop fastener straps on each side.
Page 121: Raising The Soft Top
GETTING TO KNOW YOUR VEHICLE 4. Close the storage bag and store in a safe location. Raising The Soft Top 1. From the Sunrider® Position, remove straps if previously secured. Step Four Securing Strap CAUTION! Failure to follow the next steps could result in damage to the soft top or vehicle.
Page 122 120 GETTING TO KNOW YOUR VEHICLE 2. Using the side link, lift and push the soft top toward the front of the vehicle, manually guiding the top into the closed position. Lower Top Into Closed Position Fold Soft Top Toward Front Of Vehicle...
Page 123 GETTING TO KNOW YOUR VEHICLE 3. From inside the vehicle, pull the handle on the header 4. Pull the handle back upward while squeezing the hook, latch downward to engage the hook into its receiver. locking the latch into place. Step Three Step Four 5.
Page 124 122 GETTING TO KNOW YOUR VEHICLE Install The Right And Left Quarter Panel Cover Assem- 2. Engage the plastic retainers on the front of the cover blies: assembly (toward the front of the vehicle) starting at the top, and working downward. 1.
Page 125 GETTING TO KNOW YOUR VEHICLE 3. Secure the hook-and-loop fastener at the upper front Install The Rear Window corner of each quarter panel cover by pressing firmly. 1. From either side, guide the rear window into the retainer while keeping the window level. Quarter Panel Hook-And-Loop Fastener Step One...
Page 126 124 GETTING TO KNOW YOUR VEHICLE 2. Engage the retainer along the bottom of the rear window 3. Engage the vertical retainers up the right and left side of beginning on the left side of the vehicle and working the rear window. toward the center.
Page 127: Folding Windshield
GETTING TO KNOW YOUR VEHICLE 4. Tuck the rear window under the soft top fabric and press NOTE: firmly. For information on removing your soft top, refer to “Removing The Soft Top” in “Getting To Know Your Vehicle”. FOLDING WINDSHIELD The fold-down windshield on your vehicle is a structural element that can provide some protection in some accidents.
Page 128: Lowering The Windshield
126 GETTING TO KNOW YOUR VEHICLE Raise the windshield as soon as the task that required its WARNING! (Continued) removal is completed and before you return to on-road • Be sure that you carefully follow the instructions for driving. Both you and your passengers should wear seat raising the windshield.
Page 129 GETTING TO KNOW YOUR VEHICLE 4. Move to the inside of the vehicle and lower both sun CAUTION! visors. Failure to follow this step will cause damage to the vehicle’s header seal. 5. Using the provided #T40 Torx head driver, remove the four Torx head fasteners located along the interior of the 2.
Page 130 128 GETTING TO KNOW YOUR VEHICLE 6. Lower the windshield gently until it contacts the footman loop bumpers (if equipped). CAUTION! Do Not Overtighten! Damage to the windshield could result. ACC/FCW Sensor Protective Cover — If Equipped Your vehicle may be equipped with a protective cover that is to be used whenever the windshield is folded down in order to protect the ACC/FCW sensor.
Page 131: Raising The Windshield
GETTING TO KNOW YOUR VEHICLE Cleaning Instructions During windshield down applications, dust/dirt can accu- mulate in the cover and block the camera lens. Use a micro- fiber cloth to clean the camera lens, module, and inside cover, being careful not to damage or scratch the module. Raising The Windshield 1.
Page 132: Hood
130 GETTING TO KNOW YOUR VEHICLE 5. Replace the protective caps over the wiper arm hex bolts HOOD and push gently until they snap into place. Opening The Hood Release both the hood latches. Protective Cap Over Wiper Bolt 6. After completing the steps above: Hood Latch Locations •...
Page 133: Closing The Hood
GETTING TO KNOW YOUR VEHICLE Closing The Hood TAILGATE To close the hood, remove the support rod from the radiator Opening crossmember, and install into the clip on the hood. Lower the hood slowly. Secure both of the hood latches. WARNING! Be sure the hood is fully latched before driving your vehicle.
Page 134: Three-Position Tailgate
132 GETTING TO KNOW YOUR VEHICLE Secure the tailgate in this position by looping the tailgate Three-Position Tailgate straps behind the circular retainer on both sides. The vehicle’s tailgate can be set to three positions: open, mid, or closed. The mid position can be used to provide a loading surface for transporting sheet goods.
Page 135 GETTING TO KNOW YOUR VEHICLE Ensure the tailgate strap is properly seated behind the circular retainer against the sides of the sheet metal. Incorrectly Seated Tailgate Strap Correctly Seated Tailgate Strap...
Page 136: Closing
134 GETTING TO KNOW YOUR VEHICLE • When hauling cargo using the mid position and the tail- • Three 2x4 boards are needed to provide support at loca- gate, you must support the load at two forward locations: tions (1) and (2). Each board will need to be cut to fit inside the pickup box.
Page 137: Garage Door Opener (Homelink®) - If Equipped
GETTING TO KNOW YOUR VEHICLE NOTE: • If the tonneau cover is installed, make sure the tonneau cover is fully closed before closing the tailgate. • Due to the presence of the Center High-Mounted Stop Light, removal of the tailgate is not recommended. GARAGE DOOR OPENER (HOMELINK®) —...
Page 138: Before You Begin Programming Homelink
136 GETTING TO KNOW YOUR VEHICLE Before You Begin Programming HomeLink® Programming A Rolling Code Programming garage door openers that were manufactured Be sure that your vehicle is parked outside of the garage after 1995 can be identified by the “LEARN” or “TRAIN” before you begin programming.
Page 139 GETTING TO KNOW YOUR VEHICLE 1. Place the ignition in the ON/RUN position. NOTE: You have 30 seconds in which to initiate the next step after 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) the LEARN button has been pushed. away from the HomeLink®...
Page 140 138 GETTING TO KNOW YOUR VEHICLE Reprogramming A Single HomeLink® Button (Rolling 3. Press and hold the HomeLink® button you want to Code) program while you press and hold the hand-held trans- mitter button. To reprogram a channel that has been previously trained, follow these steps: 4.
Page 141: Canadian/Gate Operator Programming
GETTING TO KNOW YOUR VEHICLE Reprogramming A Single HomeLink® Button (Non- It may be helpful to unplug the device during the cycling Rolling Code) process to prevent possible overheating of the garage door or gate motor. To reprogram a channel that has been previously trained, follow these steps: 1.
Page 142: Using Homelink
140 GETTING TO KNOW YOUR VEHICLE NOTE: Using HomeLink® • If the indicator light stays on constantly, programming is To operate, push and release the programmed HomeLink® complete and the garage door/device should activate button. Activation will now occur for the programmed when the HomeLink®...
Page 143: Troubleshooting Tips
GETTING TO KNOW YOUR VEHICLE Troubleshooting Tips WARNING! (Continued) • Your motorized door or gate will open and close while If you are having trouble programming HomeLink®, here are some of the most common solutions: you are programming the universal transceiver. Do not program the transceiver if people, pets or other objects •...
Page 144: Internal Equipment
142 GETTING TO KNOW YOUR VEHICLE Le présent appareil est conforme aux CNR d`Innovation, INTERNAL EQUIPMENT Science and Economic Development applicables aux appar- Storage eils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: Glove Compartment 1. l'appareil ne doit pas produire de brouillage, et The glove compartment is located on the passenger side of the instrument panel.
Page 145 GETTING TO KNOW YOUR VEHICLE To access the lower storage compartment, lift the bottom WARNING! latch. Do not operate this vehicle with the glove compartment open position. Driving with glove compartment open may result in injury in a collision. Console Storage Compartment The center console has both an upper and lower storage compartment.
Page 146 144 GETTING TO KNOW YOUR VEHICLE Non-Locking Storage Wall Locking Storage Bin Non-Locking Storage Wall Under Seat Locking Storage Bin Location The Non-Locking Storage Wall can be used for storage by folding the bottom of the rear seat up and placing items If equipped, the Locking Storage Bin is located below the behind the wall.
Page 147 NOTE: All tools for removal of storage bins come equipped with your vehicle in the Jeep Tool Kit. Locking Storage Bin (Closed View) Under Seat Storage (Open View) 1 — Key Locks 2 — Removable Bolts...
Page 148 146 GETTING TO KNOW YOUR VEHICLE NOTE: Rear Behind Seat Storage — If Equipped The rear seatback can be locked with the mechanical key on The rear wall storage bin is located behind the right rear seat. your key fob to secure items in the rear wall storage bin. The seat lock is located on the right corner of the seat back.
Page 149 GETTING TO KNOW YOUR VEHICLE Fastener Bin Your vehicle is equipped with a Fastener Bin used to store the fasteners for the doors, windshield, and hard top (if equipped) while not in use. The Fastener Bin is located behind the rear seat storage bin. The Fastener Bin contains foam inserts for each of the fasteners;...
Page 150: Cupholders
148 GETTING TO KNOW YOUR VEHICLE Cupholders The front cupholders are located in the center console. Rear Cupholders NOTE: Cupholders located in the front center console, as well as the Front Cupholders back of the center console are not removable. The rear cupholders are located on the back of the center There are also cupholders located in the rear seat armrest (if console, near the floor.
Page 151: Electrical Power Outlet
GETTING TO KNOW YOUR VEHICLE Rear Seat Armrest Cupholders Front Power Outlet Electrical Power Outlet CAUTION! • Do not exceed the maximum power of 160 W (13 A) at There is a 12V (13 A) auxiliary power outlet that can provide 12 Volts.
Page 152: Power Inverters - If Equipped
150 GETTING TO KNOW YOUR VEHICLE WARNING! CAUTION! (Continued) To avoid serious injury or death: • After the use of high power draw accessories, or long periods of the vehicle not being started (with accesso- • Do not insert any objects into the receptacles. ries still plugged in), the vehicle must be driven a suffi- •...
Page 153 GETTING TO KNOW YOUR VEHICLE Power Inverter Power Inverter Switch (If Equipped) There may also be a second 115 V (400 W) maximum exterior power inverter located on the rear right side of the truck bed near the tailgate. This inverter can be turned on by the Instru- ment Panel Power Inverter switch located to the left of the steering wheel.
Page 154: Auxiliary Switches - If Equipped
152 GETTING TO KNOW YOUR VEHICLE NOTE: Auxiliary Switches — If Equipped 400 W is the maximum for the inverter, not each outlet. If two Four auxiliary switches are located in the lower switch bank outlets are in use, 400 W is shared amongst the devices of the instrument panel and can be used to power various plugged in.
Page 155 GETTING TO KNOW YOUR VEHICLE NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition. For more information, refer to “Uconnect Settings” in “Multimedia”. The auxiliary switches manage the relays that power four blunt cut wires.
Page 156: Bed Rail Tie Down System - If Equipped
154 GETTING TO KNOW YOUR VEHICLE Wire Color Chart Circuit Function Fuse Wire Color Locations Interior (passenger side under instrument panel) & Aux Switch 1 F93 – 40 Amp Beige/Pink Underhood (right side near battery) Interior (passenger side under instrument panel) & Aux Switch 2 F92 –...
Page 157 GETTING TO KNOW YOUR VEHICLE Bed Rail Tie Down Locations Adjustable Cleat Assembly 1 — Utility Rail Detent There are two adjustable utility rail cleats on each side of the 2 — Cleat Retainer Nut bed that can be used to assist in securing cargo. 3 —...
Page 158: Tonneau Cover - If Equipped
156 GETTING TO KNOW YOUR VEHICLE To remove the utility rail cleats from the utility rail, slide the Tonneau Cover Installation cleat to the rectangular cutout located at the end of the rail. To install the Tonneau Cover, proceed as follows: TONNEAU COVER —...
Page 159 GETTING TO KNOW YOUR VEHICLE 4. Release the stowage straps used to secure the Tonneau 5. Roll the Tonneau Cover rearward toward the back of the Cover in the rolled up position. truck bed. Release Stowage Strap Roll Tonneau Cover Rearward...
Page 160 158 GETTING TO KNOW YOUR VEHICLE 6. Position both Tonneau Cover latches over the locking mechanisms (one on each side of the truck bed), making sure the plastic retainer is correctly seated in the forward part of the latch. Incorrectly Seated Retainer Correctly Seated Retainer...
Page 161 GETTING TO KNOW YOUR VEHICLE 7. Once the rear Tonneau Cover bar is positioned over the NOTE: locking mechanism, grasp the back of the Tonneau Cover If desired, the Tonneau Cover can be left in this position and and push downward on the center to engage the locking the tailgate can be raised to the mid-position.
Page 162: Tonneau Cover Removal
160 GETTING TO KNOW YOUR VEHICLE 2. Pull one of the red release straps to disengage the rear CAUTION! locking mechanism. Do not sit on the Tonneau Cover; damage to the cover and/or cargo will occur. NOTE: Pulling either strap will release the latches to roll the Tonneau Cover Removal Tonneau Cover up;...
Page 163 GETTING TO KNOW YOUR VEHICLE 4. Using the stowage straps, secure the Tonneau Cover in the rolled up position. Fastener Locations 6. Utilizing two people, lift the Tonneau Cover up and away from the truck bed. Secure Tonneau Cover 5. Using a #T50 Torx head driver, remove the two fasteners NOTE: securing the Tonneau Cover to the front of the truck bed.
Page 164: Roof Luggage Rack - If Equipped
162 GETTING TO KNOW YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED WARNING! Cargo must be securely tied down before driving your NOTE: vehicle. Improperly secured loads can fly off the vehicle, Roof rack applications are for Hard Top models ONLY. particularly at high speeds, resulting in personal injury The Roof Luggage Rack is designed to allow for carrying an or property damage.
Page 165 GETTING TO KNOW YOUR VEHICLE CAUTION! (Continued) • Load should always be secured to cross bars first, with tie down loops used as additional securing points if needed. Tie loops are intended as supplementary tie down points only. Do not use ratcheting mechanisms with the tie loops.
Page 166: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Base Instrument Cluster...
Page 167: Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL Premium Instrument Cluster 2. Temperature Gauge Instrument Cluster Descriptions 1. Tachometer • The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates • Indicates the engine speed in revolutions per minute that the engine cooling system is operating satisfacto- (RPM x 1000).
Page 168: Instrument Cluster Display
166 GETTING TO KNOW YOUR INSTRUMENT PANEL 4. Fuel Gauge WARNING! A hot engine cooling system is dangerous. You or others • The pointer shows the level of fuel in the fuel tank could be badly burned by steam or boiling coolant. You when the ignition switch is in the ON/RUN position.
Page 169: Instrument Cluster Display Location And Controls
GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Location And Controls The Instrument Cluster Display is located in the center of the instrument cluster. 7.0 Inch Instrument Cluster Display Location • The top line where Reconfigurable Telltales, Compass Direction, Outside Temperature, Time, Range, MPG or Trip are displayed.
Page 170 168 GETTING TO KNOW YOUR INSTRUMENT PANEL The system allows the driver to select information by • Down Arrow Button: pushing the following buttons mounted on the steering Push and release the down arrow button to scroll wheel: downward through the Main Menu items. •...
Page 171: Oil Life Reset - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL The Main Menu items consists of the following: Unless reset, this message will continue to display each time you place the ignition in the ON/RUN position. To turn off • Speedometer the message temporarily, push and release the OK button. •...
Page 172: Off Road+ Display - If Equipped
170 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: • 4L: Speed Control — Cruise Control Unavailable in 4WD If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If • 4L: Adaptive Cruise Control — Adaptive Cruise Control necessary, repeat this procedure.
Page 173: Instrument Cluster Display Menu Items
GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Menu Items • Tire Pressure • Coolant Temperature • Transmission Tempera- • Oil Temperature NOTE: ture — Automatic The instrument cluster display menu items display in the Transmission Only center of the instrument cluster. Menu items may vary depending on your vehicle features.
Page 174 172 GETTING TO KNOW YOUR INSTRUMENT PANEL Pitch And Roll Push the Adaptive Cruise Control (ACC) ON/OFF button (located on the steering wheel) until one of the following Displays the pitch and roll of the vehicle in the graphic with displays in the instrument cluster display: the angle number on the screen.
Page 175 GETTING TO KNOW YOUR INSTRUMENT PANEL The ACC screen may display once again if any ACC activity “LOW” message and a new Range value will display. occurs, which may include any of the following: Range cannot be reset through the OK button. •...
Page 176 174 GETTING TO KNOW YOUR INSTRUMENT PANEL Stop/Start — If Equipped Stored Messages Push and release the up or down arrow button until the Push and release the up or down arrow button until the Stop/Start icon/title is highlighted in the instrument cluster Messages Menu item is highlighted.
Page 177 GETTING TO KNOW YOUR INSTRUMENT PANEL Screen Setup Driver Selectable Items • Trip A Distance • Trip B Distance Upper Left • Audio • None • Speedometer • Compass (default setting) • Menu Title (default setting) • Outside Temp • Time Upper Right •...
Page 178: Battery Saver On, Battery Saver Mode Message, And Electrical Load Reduction Actions (If Equipped)
176 GETTING TO KNOW YOUR INSTRUMENT PANEL • Fuel Economy (show/hide) Battery Saver On, Battery Saver Mode Message, And Electrical Load Reduction Actions (If Equipped) • Trip Info (show/hide) • Stop/Start — If Equipped This vehicle is equipped with an Intelligent Battery Sensor (IBS) to perform additional monitoring of the electrical •...
Page 179 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: larger than the capability of charging system. The charging system is still functioning properly. • The charging system is independent from load reduction. The charging system performs a diagnostic on the • Turning on all possible vehicle electrical loads (e.g. HVAC charging system continuously.
Page 180: Warning Lights And Messages
178 GETTING TO KNOW YOUR INSTRUMENT PANEL What to do when an electrical load reduction action WARNING LIGHTS AND MESSAGES message is present (“Battery Saver On” or “Battery Saver The warning/indicator lights will illuminate in the instru- Mode”) ment panel together with a dedicated message and/or During a trip: acoustic signal when applicable.
Page 181 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: — Brake Warning Light The light may flash momentarily during sharp cornering This warning light monitors various brake functions, maneuvers, which change fluid level conditions. The vehicle including brake fluid level and parking brake application. If should have service performed, and the brake fluid level the brake light turns on it may indicate that the parking checked.
Page 182 180 GETTING TO KNOW YOUR INSTRUMENT PANEL light does not illuminate, have the light inspected by an — Electric Power Steering Fault Warning Light authorized dealer. This warning light will turn on when there's a fault with the The light also will turn on when the parking brake is applied Electric Power Steering (EPS) system.
Page 183 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Refer to “If Your Engine Overheats” in “In Case Of Emer- This light may turn on if the accelerator and brake pedals are gency” for further information. pressed at the same time. — Hood Open Warning Light If the light continues to flash when the vehicle is running, This indicator will illuminate when the hood is ajar/open immediate service is required and you may experience...
Page 184 182 GETTING TO KNOW YOUR INSTRUMENT PANEL Refer to “Occupant Restraint Systems” in “Safety” for — Seat Belt Reminder Warning Light further information. This warning light indicates when the driver or passenger seat belt is unbuckled. When the ignition is first placed in the —...
Page 185: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL — Vehicle Security Warning Light — If Equipped — Electronic Stability Control (ESC) Active Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash This warning light will indicate when the Electronic Stability slowly until the vehicle is disarmed.
Page 186 184 GETTING TO KNOW YOUR INSTRUMENT PANEL — Electronic Stability Control (ESC) OFF Warning — Engine Check/Malfunction Indicator Warning Light Light — If Equipped (MIL) This warning light indicates the Electronic Stability Control The Engine Check/Malfunction Indicator Light (MIL) is a (ESC) is off.
Page 187 GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING! — Service Forward Collision Warning (FCW) Light — If Equipped A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal This warning light will illuminate to indicate a fault in the operating conditions.
Page 188 186 GETTING TO KNOW YOUR INSTRUMENT PANEL vehicle placard or tire inflation pressure label, you should — Tire Pressure Monitoring System (TPMS) Warning determine the proper tire inflation pressure for those tires. Light As an added safety feature, your vehicle has been equipped The warning light switches on and a message is displayed to with a Tire Pressure Monitoring System (TPMS) that illumi- indicate that the tire pressure is lower than the recom-...
Page 189: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL sequence will continue upon subsequent vehicle start-ups as Yellow Indicator Lights long as the malfunction exists. When the malfunction indi- cator is illuminated, the system may not be able to detect or — 4WD Indicator Light — If Equipped signal low tire pressure as intended.
Page 190 188 GETTING TO KNOW YOUR INSTRUMENT PANEL — Axle Locker Fault Indicator Light — Service Adaptive Cruise Control Warning Light — If Equipped This light indicates when front and/or rear axle locker fault has been detected. This light will turn on when the ACC is not operating and needs service.
Page 191: Green Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Green Indicator Lights — Cruise Control SET Indicator Light — If Equipped With A Premium Instrument Cluster — Adaptive Cruise Control (ACC) Set With No Target This indicator light will illuminate when the speed control is Detected Indicator Light —...
Page 192: White Indicator Lights
190 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: corner of the instrument cluster display to correspond to the specific seating position once the seat belt has been buckled. • A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. Refer to “Occupant Restraint Systems”...
Page 193: Gray Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL — Rear Seat Unoccupied Indicator Light — If — Selec - Speed Control (SSC) Indicator Light Equipped This light will turn on when Selec - Speed Control is acti- This light indicates when the rear passenger seats are unoc- vated.
Page 194: Onboard Diagnostic System - Obd Ii
192 GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is equipped with a sophisticated Onboard Your vehicle is required to have an Onboard Diagnostic Diagnostic system called OBD II. This system monitors the system (OBD II) and a connection port to allow access to performance of the emissions, engine, and transmission information related to the performance of your emissions...
Page 195: Emissions Inspection And Maintenance
GETTING TO KNOW YOUR INSTRUMENT PANEL 2. As soon as you cycle the ignition switch to the ON posi- EMISSIONS INSPECTION AND MAINTENANCE tion, you will see the “Malfunction Indicator Light (MIL)” PROGRAMS symbol come on as part of a normal bulb check. In some localities, it may be a legal requirement to pass an inspection of your vehicle's emissions control system.
Page 196 194 GETTING TO KNOW YOUR INSTRUMENT PANEL Regardless of whether your vehicle's OBD II system is ready, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced before going to the I/ M station. The I/M station can fail your vehicle because the MIL is on with the engine running.
Page 197: Safety
SAFETY You also may experience the following when ABS activates: SAFETY FEATURES • The ABS motor noise (it may continue to run for a short Anti-Lock Brake System (ABS) time after the stop) The Anti-Lock Brake System (ABS) provides increased •...
Page 198: Electronic Brake Control (Ebc) System
196 SAFETY Anti-Lock Brake Warning Light WARNING! (Continued) The yellow “Anti-Lock Brake Warning Light” will turn on • Pumping of the Anti-Lock Brakes will diminish their when the ignition is cycled to the ON/RUN mode and may effectiveness and may lead to a collision. Pumping stay on for as long as four seconds.
Page 199 SAFETY and Electronic Roll Mitigation (ERM). These systems work WARNING! together to enhance both vehicle stability and control in The Brake Assist System (BAS) cannot prevent the various driving conditions. natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road Your vehicle may also be equipped with Trailer Sway Control (TSC), Ready Alert Braking (RAB), Selec-Speed...
Page 200 198 SAFETY NOTE: Electronic Brake Force Distribution (EBD) ERM is disabled anytime the ESC is in “Full Off” mode (if The Electronic Brake Force Distribution (EBD) function equipped). Refer to “Electronic Stability Control (ESC)” in manages the distribution of the braking torque between the this section for a complete explanation of the available ESC front and rear axles, by limiting braking pressure to the rear modes.
Page 201 SAFETY ESC uses sensors in the vehicle to determine the vehicle path WARNING! intended by the driver and compares it to the actual path of • Electronic Stability Control (ESC) cannot prevent the the vehicle. When the actual path does not match the natural laws of physics from acting on the vehicle, nor intended path, ESC applies the brake of the appropriate can it increase the traction afforded by prevailing road...
Page 202 200 SAFETY nate ESC modes should only be used for specific reasons as WARNING! (Continued) noted in the following paragraphs. • Vehicle modifications, or failure to properly maintain Partial Off your vehicle, may change the handling characteristics of your vehicle, and may negatively affect the perfor- The “Partial Off”...
Page 203 SAFETY NOTE: WARNING! System may switch from ESC “Full Off” to “Partial Off” • When in “Partial Off” mode, the TCS functionality of mode when vehicle exceeds a predetermined speed. When ESC, (except for the limited slip feature described in the vehicle speed slows below the predetermined speed the the TCS section), has been disabled and the “ESC Off system will return to ESC “Full Off”.
Page 204 202 SAFETY NOTE: ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light • The “ESC Activation/Malfunction Indicator Light” and the “ESC OFF Indicator Light” come on momentarily each The “ESC Activation/Malfunction Indicator Light” time the ignition is cycled to the ON/RUN mode. in the instrument cluster will come on when the igni- tion is turned to the ON mode.
Page 205 SAFETY The following conditions must be met in order for HSA to WARNING! activate: There may be situations where the Hill Start Assist • The feature must be enabled. (HSA) will not activate and slight rolling may occur, such as on minor hills or with a loaded vehicle, or while •...
Page 206 204 SAFETY Ready Alert Braking (RAB) WARNING! • If you use a trailer brake controller with your trailer, the Ready Alert Braking (RAB) may reduce the time required to trailer brakes may be activated and deactivated with reach full braking during emergency braking situations. It the brake switch.
Page 207 SAFETY Enabling SSC SSC Target Set Speeds • 1st = 0.6 mph (1 km/h) SSC is enabled by pushing the SSC switch, but the following conditions must also be met to enable SSC: • 2nd = 1.2 (2 km/h) • The driveline is in 4L Range. •...
Page 208 206 SAFETY • SSC performance is influenced by the Terrain Select mode. • The driver door opens. This difference may be notable to the driver and may be • The vehicle is driven greater than 20 mph (32 km/h) for perceived as a varying level of aggressiveness.
Page 209 SAFETY WARNING! WARNING! SSC is only intended to assist the driver in controlling If TSC activates while driving, slow the vehicle down, vehicle speed when driving in off-road conditions. The stop at the nearest safe location, and adjust the trailer driver must remain attentive to the driving conditions load to eliminate trailer sway.
Page 210: Auxiliary Driving Systems
208 SAFETY system sensors operate when the vehicle is in any forward AUXILIARY DRIVING SYSTEMS gear or REVERSE (R) and enters stand-by mode when the Blind Spot Monitoring (BSM) — If Equipped vehicle is in PARK (P). The Blind Spot Monitoring (BSM) system uses two The BSM detection zone covers approximately one lane radar-based sensors, located inside the taillights, to detect width on both sides of the vehicle 12 ft (3.8 m).
Page 211 SAFETY Indicator lamps when a motorcycle or any small object The BSM system notifies the driver of objects in the detection remains at the side of the vehicle for extended periods of zones by illuminating the BSM warning light located in the time (more than a couple of seconds).
Page 212 210 SAFETY Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either side Vehicles that come up from behind your vehicle on either of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 213 SAFETY Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 15 mph (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehi- cles is greater than 15 mph (24 km/h), the warning light will not illuminate.
Page 214 212 SAFETY Stationary Objects Opposing Traffic The BSM system will not alert you of objects that are trav- WARNING! eling in the opposite direction of the vehicle in adjacent The Blind Spot Monitoring system is only an aid to help lanes.
Page 215 SAFETY (5 km/h), to objects moving a maximum of approximately Rear Cross Path (RCP) 20 mph (32 km/h), such as in parking lot situations. The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking spaces where their NOTE: vision of oncoming vehicles may be blocked.
Page 216 214 SAFETY NOTE: Modes Of Operation Whenever an audible alert is requested by the BSM system, Three selectable modes of operation are available in the the radio is also muted. Uconnect System. Refer to “Uconnect Settings” in “Multi- media” for further information. When the system is in RCP, the system shall respond with both visual and audible alerts when a detected object is Blind Spot Alert Lights Only...
Page 217: Forward Collision Warning (Fcw) With Mitigation - If Equipped
SAFETY La operación de este equipo está sujeta a las siguientes dos General Information condiciones: This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada 1. es posible que este equipo o dispositivo no cause interfer- license-exempt RSS standard(s).
Page 218 216 SAFETY NOTE: FCW monitors the information from the forward looking sensors as well as the Electronic Brake Controller (EBC), to calculate the probability of a forward collision. When the system determines that a forward collision is probable, the driver will be provided with audible and visual warnings as well as a possible brake jerk warning.
Page 219 SAFETY • It is unsafe to test the FCW system. To prevent such misuse When the sensitivity of FCW is set to the “Medium” setting of the system, after four Active Braking events within an and the system status is “Warning and Braking”, this allows ignition cycle, the Active Braking portion of FCW will be the system to warn the driver of a possible collision with the deactivated until the next ignition cycle.
Page 220 218 SAFETY • Changing the FCW status to “Off” prevents the system its full performance state. If the problem persists, see your from providing autonomous braking, or additional brake authorized dealer. support if the driver is not braking adequately in the event Service FCW Warning of a potential frontal collision.
Page 221: Tire Pressure Monitor System (Tpms)
SAFETY eils radio exempts de licence. L'exploitation est autorisée aux NOTE: deux conditions suivantes: The alert warning on the cluster will stay on until the tire is inflated to the placard pressure. 1. l'appareil ne doit pas produire de brouillage, et The tire pressure will vary with temperature by approxi- 2.
Page 222 220 SAFETY placard pressure. Once the low tire pressure warning (Tire NOTE: Pressure Monitoring System Warning Light) illuminates, When filling warm tires, the tire pressure may need to be you must increase the tire pressure to the recommended cold increased up to an additional 4 psi (28 kPa) above the recom- placard pressure in order for the TPMS Light to turn off.
Page 223 SAFETY System Operation CAUTION! (Continued) • After inspecting or adjusting the tire pressure always The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could monitor tire pressure levels.
Page 224 222 SAFETY The TPMS consists of the following components: • Receiver module • Four tire pressure monitoring sensors • Various tire pressure monitoring system messages, which display in the instrument cluster • Tire pressure monitoring telltale light Tire Pressure Monitoring Low Pressure Warnings The TPMS Warning Light will illuminate in the instrument cluster and a chime will sound when tire Tire Pressure Monitoring Low Pressure Warning...
Page 225 SAFETY NOTE: longer display, and a pressure value will display in place of When filling warm tires, the tire pressure may need to be the dashes. A system fault can occur due to any of the increased up to an additional 4 psi (28 kPa) above the recom- following: mended cold placard pressure in order to turn the TPMS •...
Page 226 224 SAFETY 3. After driving the vehicle for up to 20 minutes above Vehicles With a Full Size Matching Spare 15 mph (24 km/h), the TPMS Warning Light will flash on 1. If your vehicle is equipped with a matching full-size and off for 75 seconds and then remain on solid.
Page 227 SAFETY NOTE: Operation: • Only one tire can be filled at a time when using the Tire Fill • The horn will chirp to let the user know when to stop Alert system. filling the tire, when it reaches recommended pressure. •...
Page 228 226 SAFETY In the Selectable Tire Fill Alert application, which is located sion. The hazard lamps will come on to confirm the vehicle in the apps menu of the Uconnect System, you will be able to is in Tire Fill Alert mode. select a pressure setting for both the front and rear axle tire When Tire Fill Alert Mode is entered, the tire pressure screen pressures by scrolling through a pressure range from XX to...
Page 229 SAFETY sure Monitoring (TPM) Sensors. Then, drive the vehicle for license-exempt RSS standard(s). Operation is subject to the 20 minutes above 15 mph (24 km/h). The TPMS will chime, following two conditions: the TPMS Warning Light will flash on and off for 75 seconds 1.
Page 230: Occupant Restraint Systems
228 SAFETY NOTE: Here are some simple steps you can take to minimize the risk Changes or modifications not expressly approved by the of harm from a deploying air bag: party responsible for compliance could void the user’s 1. Children 12 years old and under should always ride authority to operate the equipment.
Page 231: Seat Belt Systems
SAFETY 7. The driver and front passenger seats should be moved Seat Belt Systems back as far as practical to allow the front air bags room to Buckle up even though you are an excellent driver, even on inflate. short trips. Someone on the road may be a poor driver and 8.
Page 232 230 SAFETY Initial Indication front seat passenger seat belts are buckled. The driver should instruct all occupants to buckle their seat belts. If the driver is unbuckled when the ignition switch is first in the START or ON/RUN position, a chime will signal for a Change of Status few seconds.
Page 233 SAFETY NOTE: WARNING! (Continued) If BeltAlert has been deactivated and the driver or outboard • In a collision, you and your passengers can suffer much front seat passenger (if equipped with outboard front greater injuries if you are not properly buckled up. You passenger seat BeltAlert) is unbuckled the Seat Belt can strike the interior of your vehicle or other passen- Reminder Light will turn on and remain on until the driver...
Page 234 232 SAFETY WARNING! (Continued) WARNING! (Continued) • Two people should never be belted into a single seat • A seat belt that is too loose will not protect you prop- belt. People belted together can crash into one another erly. In a sudden stop, you could move too far forward, in a collision, hurting one another badly.
Page 235 SAFETY 3. When the seat belt is long enough to fit, insert the latch Lap/Shoulder Belt Operating Instructions plate into the buckle until you hear a “click.” 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2.
Page 236 234 SAFETY 4. Position the lap belt so that it is snug and lies low across 6. To release the seat belt, push the red button on the buckle. your hips, below your abdomen. To remove slack in the The seat belt will automatically retract to its stowed posi- lap belt portion, pull up on the shoulder belt.
Page 237 SAFETY anchorage button, try to move it up or down to make sure Adjustable Upper Shoulder Belt Anchorage that it is locked in position. In the driver and outboard front passenger seats, the top of the shoulder belt can be adjusted upward or downward to NOTE: position the seat belt away from your neck.
Page 238 236 SAFETY Seat Belt Extender Seat Belts And Pregnant Women If a seat belt is not long enough to fit properly, even when the webbing is fully extended and the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, an authorized dealer can provide you with a Seat Belt Extender.
Page 239 SAFETY Seat Belt Pretensioner Switchable Automatic Locking Retractor (ALR) The front outboard seat belt system is equipped with preten- The seat belts in the passenger seating positions are sioning devices that are designed to remove slack from the equipped with a Switchable Automatic Locking Retractor seat belt in the event of a collision.
Page 240 238 SAFETY occupant’s mid-section so as to not activate the ALR. If the WARNING! (Continued) ALR is activated, you will hear a clicking sound as the seat • Never install a rear-facing child restraint in the front belt retracts. Allow the webbing to retract completely in this seat of a vehicle.
Page 241 SAFETY WARNING! • The seat belt assembly must be replaced if the switch- able Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the seat belt assembly could increase the risk of injury in collisions.
Page 242: Supplemental Restraint Systems (Srs)
240 SAFETY • Seat Belt Pretensioners Supplemental Restraint Systems (SRS) • Seat Track Position Sensors Some of the safety features described in this section may be standard equipment on some models, or may be optional • Occupant Classification System equipment on others. If you are not sure, ask an authorized Air Bag Warning Light dealer.
Page 243 SAFETY The ORC also includes diagnostics that will illuminate the WARNING! instrument panel Air Bag Warning Light if a malfunction is Ignoring the Air Bag Warning Light in your instrument detected that could affect the air bag system. The diagnostics panel could mean you won’t have the air bag system to also record the nature of the malfunction.
Page 244 242 SAFETY Front Air Bags WARNING! This vehicle has front air bags and lap/shoulder belts for • Being too close to the steering wheel or instrument both the driver and front passenger. The front air bags are a panel during front air bag deployment could cause supplement to the seat belt restraint systems.
Page 245 SAFETY The first stage inflator is triggered immediately during an driver and front passenger when the Passenger Advanced impact that requires air bag deployment. A low energy Front Air Bag is deactivated. The PAD Indicator Light illumi- output is used in less severe collisions. A higher energy nates the words “PASSENGER AIR BAG OFF”...
Page 246 244 SAFETY Seat belts are necessary for your protection in all collisions, WARNING! (Continued) and also are needed to help keep you in position, away from • Relying on the air bags alone could lead to more severe an inflating air bag. injuries in a collision.
Page 247 SAFETY The Occupant Classification System (OCS) Consists Of designed, it is important for the front passenger to be seated The Following: properly and properly wearing the seat belt. Properly seated passengers are: • Occupant Restraint Controller (ORC) • Sitting upright. •...
Page 248 246 SAFETY The OCS may deactivate the deployment of the Passenger Passenger Air Bag Disable (PAD) System Advanced Front Air Bag if the OCS estimates that: Front Passenger • The front passenger seat is unoccupied or has very light Front Passenger Advanced Air Front Passenger objects in it.
Page 249 SAFETY Passenger Air Bag Disable (PAD) System WARNING! Front Passenger • Never place a rear-facing child restraint in front of an Front Passenger Advanced Air air bag. A deploying passenger front air bag can cause Front Passenger Seat Occupant Bag Disabled death or serious injury to a child 12 years or younger, Air Bag Status Status...
Page 250 248 SAFETY The PAD indicator light should not be illuminated when an If The PAD Indicator Light Is Illuminated For An Adult Passenger: adult passenger is properly seated in the front passenger seat. The driver and adult passenger should verify that the If an adult passenger is seated in the front passenger seat and PAD Indicator Light is not illuminated when an adult is the PAD Indicator Light is illuminated, the passenger may be...
Page 251 SAFETY Air Bag may be deactivated. Therefore, the Passenger WARNING! Advanced Front Air Bag may or may not be activated for a • If the PAD Indicator Light remains illuminated for an lighter weight passenger, including small adult adult passenger, have an authorized dealer service the (depending on size) who is seated in the passenger seat.
Page 252 250 SAFETY activation of the Passenger Advanced Front Air Bag in a • Anything that may decrease or increase the front collision. This does not mean that the OCS is working passenger’s seated weight. improperly. Decreasing the front passenger’s seated weight The OCS determines the front passenger’s most probable on the front passenger seat may result in deactivation of the classification.
Page 253 SAFETY Not Seated Properly Not Seated Properly WARNING! • If a child restraint system, child, small teenager or adult in the front passenger seat is seated improperly, the occupant may provide an output signal to the OCS that is different from the occupant’s properly seated weight input.
Page 254 252 SAFETY WARNING! WARNING! (Continued) • Ignoring the Air Bag Warning Light in your instrument • Always wear your seat belt and sit properly, with the panel could mean you won’t have the air bags to protect seatback in an upright position, your back against the you in a collision.
Page 255 SAFETY The passenger seat assembly contains critical OCS compo- WARNING! nents that may affect Passenger Advanced Front Air Bag • Unapproved modifications or service procedures to the inflation. In order for the OCS to properly classify the seated passenger seat assembly, its related components, seat weight of a front seat passenger, the OCS components must cover, or cushion may inadvertently change the air bag function as designed.
Page 256 254 SAFETY WARNING! (Continued) • Do not mount any accessories to the knee impact bolsters such as alarm lights, stereos, citizen band radios, etc. Supplemental Side Air Bags Supplemental Seat-Mounted Side Air Bags (SABs) This vehicle is equipped with Supplemental Seat-Mounted Side Air Bags (SABs).
Page 257 SAFETY compartment. The Side Air Bags may deploy during angled WARNING! or offset frontal collisions where the front air bags deploy. Do not use accessory seat covers or place objects between you and the Side Air Bags; the performance could be Side Air Bags are a supplement to the seat belt restraint adversely affected and/or objects could be pushed into system.
Page 258 256 SAFETY • Steering Wheel and Column WARNING! • Instrument Panel • Side Air Bags need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • Knee Impact Bolsters • Being too close to the Side Air Bags during deployment •...
Page 259 SAFETY If you do have a collision which deploys the air bags, any or WARNING! all of the following may occur: Deployed air bags and seat belt pretensioners cannot • The air bag material may sometimes cause abrasions and/ protect you in another collision. Have the air bags, seat or skin reddening to the occupants as the air bags deploy belt pretensioners, and the seat belt retractor assemblies and unfold.
Page 260 258 SAFETY • Turn on the interior lights, which remain on as long as the NOTE: battery has power or for 15 minutes from the intervention After an accident, remember to cycle the ignition to the STOP of the Enhanced Accident Response System. (OFF/LOCK) position and remove the key from the ignition switch to avoid draining the battery.
Page 261 SAFETY Maintaining Your Air Bag System Event Data Recorder (EDR) This vehicle is equipped with an Event Data Recorder (EDR). WARNING! The main purpose of an EDR is to record, in certain crash or • Modifications to any part of the air bag system could near crash-like situations, such as an air bag deployment or cause it to fail when you need it.
Page 262: Child Restraints
260 SAFETY However, other parties, such as law enforcement, could WARNING! combine the EDR data with the type of personally identi- In a collision, an unrestrained child can become a fying data routinely acquired during a crash investigation. projectile inside the vehicle. The force required to hold To read data recorded by an EDR, special equipment is even an infant on your lap could become so great that you could not hold the child, no matter how strong you...
Page 263 SAFETY NOTE: http://www.tc.gc.ca/eng/motorvehiclesafety/safed- rivers-childsafety-index-53.htm • For additional information, refer http:// www.nhtsa.gov/parents-and-caregivers call: 1–888–327–4236 • Canadian residents should refer to Transport Canada’s website for additional information: Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Child Size, Height, Weight Or Age Restraint Children who are two years old or Either an Infant Carrier or a Convertible...
Page 264 262 SAFETY Recommended Type Of Child Child Size, Height, Weight Or Age Restraint Children who have outgrown their Belt Positioning Booster Seat and the forward-facing child restraint, but are vehicle seat belt, seated in a rear seat of Larger Children too small to properly fit the vehicle’s the vehicle seat belt...
Page 265 SAFETY Older Children And Child Restraints WARNING! • Improper installation can lead to failure of an infant or Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward-facing in child restraint. It could come loose in a collision. The child could be badly injured or killed.
Page 266 264 SAFETY If the answer to any of these questions was “no,” then the Children Too Large For Booster Seats child still needs to use a booster seat in this vehicle. If the Children who are large enough to wear the shoulder belt child is using the lap/shoulder belt, check seat belt fit peri- comfortably, and whose legs are long enough to bend over odically and make sure the seat belt buckle is latched.
Page 267 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight LATCH – Lower Restraint Type of the Child + LATCH – Lower Seat Belt + Top Seat Belt Only Anchors + Top Child Restraint Anchors Only Tether Anchor Tether Anchor...
Page 268 266 SAFETY have a top tether anchorage but no lower anchorages. In Lower Anchors And Tethers For CHildren (LATCH) / these seating positions, the seat belt must be used with the ISOFIX Restraint System top tether anchorage to install the child restraint. Please see the following table for more information.
Page 269 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child and What is the weight limit (child’s weight the child restraint is 65 lbs (29.5 kg). Use + weight of the child restraint) for using 65 lbs (29.5 kg) the seat belt and tether anchor instead the LATCH anchorage system to attach...
Page 270 268 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Never “share” a LATCH anchorage with two or more child restraints. If the center position does not have dedicated Can two child restraints be attached LATCH lower anchorages, use the seat using common lower...
Page 271 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages The lower anchorages are round bars that are found There are tether strap anchorages located behind at the rear of the seat cushion where it meets the seat- each of the rear seats. back.
Page 272 270 SAFETY Always follow the directions of the child restraint manu- Center Seat LATCH facturer when installing your child restraint. Not all child Do not install child restraints with rigid lower attachments in restraint systems will be installed as described here. the center seating position.
Page 273 SAFETY 4. If the child restraint has a tether strap, connect it to the top buckle it. Do not lock the seat belt. Remind all children in the tether anchorage. See the section “Installing Child vehicle that the seat belts are not toys and that they should Restraints Using the Top Tether Anchorage”...
Page 274 272 SAFETY Lap/Shoulder Belt Systems For Installing Child WARNING! Restraints In This Vehicle • Improper installation or failure to properly secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed. • Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint.
Page 275 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts Always use the tether anchor when What is the weight limit (child’s weight using the seat belt to install a forward + weight of the child restraint) for using Weight limit of the Child Restraint facing child...
Page 276 274 SAFETY 3. Slide the latch plate into the buckle until you hear a Installing A Child Restraint With A Switchable Automatic “click.” Locking Retractor (ALR): Child restraint systems are designed to be secured in vehicle 4. Pull on the webbing to make the lap portion tight against seats by lap belts or the lap belt portion of a lap/shoulder the child seat.
Page 277 SAFETY 9. Test that the child restraint is installed tightly by pulling The Top Tether anchorages are located behind each rear back and forth on the child seat at the belt path. It should seating position. To attach the tether strap of the child not move more than 1 inch (25.4 mm) in any direction.
Page 278: Transporting Pets
276 SAFETY 6. Tighten the tether strap according to the child seat manu- Transporting Pets facturer's instructions. Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat (if equipped) in pet harnesses or pet carriers that are secured by seat belts.
Page 279: Exhaust Gas
SAFETY The best protection against carbon monoxide entry into the WARNING! (Continued) vehicle body is a properly maintained engine exhaust • Be sure everyone in your vehicle is in a seat and using system. a seat belt properly. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the Exhaust Gas vehicle, or when the underside or rear of the vehicle is...
Page 280 278 SAFETY position and interfere with the pedal assemblies or impair Air Bag Warning Light safe operation of your vehicle in other ways. The Air Bag warning light will turn on for four to eight seconds as a bulb check when the ignition switch is first WARNING! turned to ON/RUN.
Page 281 SAFETY WARNING! (Continued) WARNING! (Continued) • ONLY use the driver’s side floor mat on the driver’s • If the vehicle carpet has been removed and re-installed, side floor area. To check for interference, with the always properly attach carpet to the floor and check the vehicle properly parked with the engine off, fully floor mat fasteners are secure to the vehicle carpet.
Page 282: Periodic Safety Checks You Should Make Outside The Vehicle
280 SAFETY Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check the area under vehicle after overnight parking for patterns.
Page 283: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE Manual Transmission — If Equipped Before starting your vehicle, adjust your seat, adjust both Apply the parking brake, place the gear selector in inside and outside mirrors, and fasten your seat belts. NEUTRAL, and press the clutch pedal before starting the vehicle.
Page 284: Normal Starting
282 STARTING AND OPERATING 3. If the gear selector is not in PARK (with vehicle stopped) Normal Starting and the ENGINE START/STOP button is pushed once, To Turn On The Engine Using The ENGINE START/STOP the transmission will automatically select PARK and the Button engine will turn off, however the ignition will remain in the ACC mode (NOT the OFF mode).
Page 285 STARTING AND OPERATING ENGINE START/STOP Button Functions — With Driver’s AutoPark Foot Off The Brake Pedal (In PARK Or NEUTRAL Posi- AutoPark is a supplemental feature to assist in placing the tion) vehicle in PARK should the situations on the following The ENGINE START/STOP button operates similar to an pages occur.
Page 286 284 STARTING AND OPERATING If the vehicle is not in PARK and the driver turns off the • Driver door is ajar or in conditions where driver door is engine, the vehicle may AutoPark. removed an additional trigger would be if the driver is off the seat (seat pad sensor detects driver missing) AutoPark will engage when all of these conditions are met: •...
Page 287: Extreme Cold Weather (Below -22°F Or −30°C)
STARTING AND OPERATING The MESSAGE “Vehicle Speed is Too High to Shift to P” The MESSAGE “AutoPark Not Engaged” will be displayed will be displayed in the instrument cluster if vehicle speed is in the instrument cluster. A warning chime will continue above 1.2 mph (2.0 km/h).
Page 288: After Starting
286 STARTING AND OPERATING After Starting WARNING! • Never pour fuel or other flammable liquid into the The idle speed is controlled automatically, it will decrease as throttle body air inlet opening in an attempt to start the the engine warms up. vehicle.
Page 289: Engine Break-In Recommendations
STARTING AND OPERATING NOTE: ENGINE BREAK-IN RECOMMENDATIONS A new engine may consume some oil during its first few A long break-in period is not required for the engine and thousand miles (kilometers) of operation. This should be drivetrain (transmission and axle) in your vehicle. considered a normal part of the break-in and not interpreted as a problem.
Page 290 288 STARTING AND OPERATING When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. For vehicles equipped with an automatic transmission, apply the parking brake before placing the gear selector in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector out of PARK.
Page 291: Manual Transmission - If Equipped
STARTING AND OPERATING MANUAL TRANSMISSION — IF EQUIPPED WARNING! (Continued) • Do not leave the key fob in or near the vehicle, or in a WARNING! location accessible to children. A child could operate You or others could be injured if you leave the vehicle power windows, other controls, or move the vehicle.
Page 292: Shifting
290 STARTING AND OPERATING Shift Pattern Manual Transmission Shifter Shifting To shift the gears, fully press the clutch pedal and place the Fully press the clutch pedal before shifting gears. As you gear selector into the desired gear position (the diagram for release the clutch pedal, lightly press the accelerator pedal.
Page 293: Downshifting
STARTING AND OPERATING Recommended Vehicle Shift Speeds To utilize your manual transmission efficiently for both fuel economy and performance, it should be upshifted as listed in the recommended shift speed chart. Shift at the vehicle speeds listed for acceleration. When heavily loaded or pulling a trailer these recommended upshift speeds may not apply.
Page 294 292 STARTING AND OPERATING CAUTION! (Continued) CAUTION! (Continued) • When descending a hill, be very careful to downshift • Descending a hill in low range with clutch pedal one gear at a time to prevent overspeeding the engine depressed could result in clutch damage. which can cause engine damage, and/or clutch damage, Maximum Recommended Downshift Speeds even if the clutch pedal is pressed.
Page 295: Automatic Transmission - If Equipped
STARTING AND OPERATING AUTOMATIC TRANSMISSION — IF EQUIPPED WARNING! (Continued) • The transmission may not engage PARK if the vehicle CAUTION! is moving. Always bring the vehicle to a complete stop • Shift into or out of PARK or REVERSE only after the before shifting to PARK, and verify that the transmis- vehicle has come to a complete stop.
Page 296: Ignition Park Interlock
294 STARTING AND OPERATING NOTE: WARNING! (Continued) The transmission is NOT locked in PARK when the ignition • When exiting the vehicle, always make sure the igni- is in the ACC mode (even though the engine will be off). tion is in the OFF mode, remove the key fob from the Ensure that the transmission is in PARK, and the ignition is vehicle, and lock the vehicle.
Page 297 STARTING AND OPERATING NOTE: and will display the current gear in the instrument cluster. In the event of a mismatch between the gear selector position Refer to "AutoStick" in this section for further information. and the actual transmission gear (for example, driver selects PARK while driving), the position indicator will blink continuously until the selector is returned to the proper posi- tion, or the requested shift can be completed.
Page 298 296 STARTING AND OPERATING When exiting the vehicle, always: Gear Ranges • Apply the parking brake, Do not depress the accelerator pedal when shifting from PARK or NEUTRAL into another gear range. • Shift the transmission into PARK, • Turn the ignition OFF and, NOTE: After selecting any gear range, wait a moment to allow the •...
Page 299 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • The transmission may not engage PARK if the vehicle • When exiting the vehicle, always make sure the igni- is moving. Always bring the vehicle to a complete stop tion is in the OFF mode, remove the key fob from the before shifting to PARK, and verify that the transmis- vehicle, and lock the vehicle.
Page 300 298 STARTING AND OPERATING REVERSE (R) CAUTION! (Continued) This range is for moving the vehicle backward. Shift into • DO NOT race the engine when shifting from PARK or REVERSE only after the vehicle has come to a complete stop. NEUTRAL into another gear range, as this can damage the drivetrain.
Page 301 STARTING AND OPERATING speed. Normal operation will resume once the transmission CAUTION! (Continued) temperature has risen to a suitable level. • Refer to “Recreational Towing” in “Starting And Oper- MANUAL (M) ating” and “Towing A Disabled Vehicle” in “In Case Of Emergency”...
Page 302 300 STARTING AND OPERATING In the event of a momentary problem, the transmission can NOTE: be reset to regain all forward gears by performing the Even if the transmission can be reset, we recommend that following steps: you visit an authorized dealer at your earliest possible convenience.
Page 303 STARTING AND OPERATING the MANUAL (M) position will downshift the transmission • Holding the gear selector in the (-) position will downshift to the next lower gear. Tapping the selector rearward (+) will the transmission to the lowest gear possible at the current command an upshift.
Page 304: Four-Wheel Drive Operation
302 STARTING AND OPERATING The transfer case provides four mode positions: FOUR–WHEEL DRIVE OPERATION • 2H (Two-Wheel Drive High Range) WARNING! • 4H (Four-Wheel Drive High Range) Failure to engage a transfer case position completely can • N (Neutral) cause transfer case damage or loss of power and vehicle control.
Page 305 STARTING AND OPERATING NEUTRAL (N) maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). WARNING! The transfer case is intended to be driven in the 2H position You or others could be injured or killed if you leave the for normal street and highway conditions, such as vehicle unattended with the transfer case in the hard-surfaced roads.
Page 306 304 STARTING AND OPERATING Proper operation of four-wheel drive vehicles depends on • Delayed shifts out of four-wheel drive may be experienced tires of equal size, type, and circumference on each wheel. due to uneven tire wear, low or uneven tire pressures, Any difference will adversely affect shifting and cause excessive vehicle loading, or cold temperatures.
Page 307: Trac-Lok Rear Axle - If Equipped
STARTING AND OPERATING vehicle rolling at 2 to 3 mph (3 to 5 km/h). Avoid attempting WARNING! to engage or disengage 4L with the vehicle moving faster On vehicles equipped with a limited-slip differential, than 2 to 3 mph (3 to 5 km/h). never run the engine with one rear wheel off the ground.
Page 308: Electronic Sway Bar Disconnect - If Equipped
306 STARTING AND OPERATING This feature will only activate when the following conditions Electronic Sway Bar Disconnect — If Equipped are met: Your vehicle may be equipped with an electronic discon- • Ignition in RUN position, vehicle in 4L (Low) range. necting stabilizer/sway bar.
Page 309 STARTING AND OPERATING Light” will flash during activation transition, or when activa- NOTE: tion conditions are not met. The stabilizer/sway bar should The stabilizer/sway bar may be torque locked due to left and remain in on-road mode during normal driving conditions. right suspension height differences.
Page 310: Off Road+ - If Equipped
308 STARTING AND OPERATING When Off Road+ is active, the following features will acti- Off Road+ — If Equipped vate: • The Off Road+ telltale will illuminate in the Instrument Cluster Display • A mode specific message will display the Instrument Cluster Display •...
Page 311: Electro-Hydraulic Power Steering
STARTING AND OPERATING ELECTRO-HYDRAULIC POWER STEERING • Engine/Transmission Calibration: Improved sand perfor- Your vehicle is equipped with an electro-hydraulic power mance/ wheel slip focus, change in shift schedule for sport steering system that will give you good vehicle response and mode, pedal calibration set to aggressive, operates at increased ease of maneuverability in tight spaces.
Page 312: Stop/Start System - Automatic Transmission (If Equipped)
310 STARTING AND OPERATING If the “POWER STEERING HOT” message and an icon are STOP/START SYSTEM — AUTOMATIC displayed on the instrument cluster screen, it indicates that TRANSMISSION (IF EQUIPPED) extreme steering maneuvers may have occurred, which The Stop/Start function is developed to reduce fuel caused an over temperature condition in the power steering consumption.
Page 313: Automatic Mode
STARTING AND OPERATING WARNING! (Continued) • Serious injury or death could result if you do not disconnect both batteries. To learn how to properly disconnect, see your authorized dealer. The Stop/Start feature is enabled after every normal customer engine start. At that time, the system will go into STOP/START READY and if all other condi- tions are met, can go into a STOP/START AUTOSTOP ACTIVE “Autostop”...
Page 314: Possible Reasons The Engine Does Not Autostop
312 STARTING AND OPERATING The engine will shut down, the tachometer will move to the • The transmission is not in a forward gear zero position and the Stop/Start telltale will illuminate indi- • Hood is open cating you are in Autostop. Customer settings will be main- •...
Page 315: To Start The Engine While In Autostop Mode
STARTING AND OPERATING To Start The Engine While In Autostop Mode To Manually Turn Off The Stop/Start System While in a forward gear, the engine will start when the brake 1. Push the STOP/START OFF switch (located on the switch bank). The light on the switch will illuminate. pedal is released or the throttle pedal is depressed.
Page 316: To Manually Turn On The Stop/Start System
314 STARTING AND OPERATING NOTE: To Manually Turn On The Stop/Start System It is recommended that the Stop/Start System be disabled Push the STOP/START OFF switch (located on the switch during off-road use. bank). The light on the switch will turn off. Secondary Battery System Malfunction Your vehicle may be equipped with a secondary battery used...
Page 317: Automatic Mode
STARTING AND OPERATING in “Getting To Know Your Instrument Panel” for further Automatic Mode information. WARNING! • Vehicle speed must be less than 2 mph (3 km/h). • Vehicles with the Stop/Start system will be equipped • The gear selector must be in the NEUTRAL position and with two batteries.
Page 318: To Start The Engine While In Autostop Mode
316 STARTING AND OPERATING • When driving in REVERSE Conditions that will cause the engine to start automatically while in STOP/START AUTO STOP ACTIVE mode, the • Hood is open engine will start automatically when: • 4WD system is put into 4L or Neutral •...
Page 319: To Manually Turn Off The Stop/Start System
STARTING AND OPERATING 4. If the Stop/Start system is manually turned off, the To Manually Turn Off The Stop/Start System engine can only be started and stopped by cycling the 1. Push the STOP/START Off switch (located on the switch ignition switch.
Page 320: Speed Control - If Equipped
318 STARTING AND OPERATING NOTE: SPEED CONTROL — IF EQUIPPED In order to ensure proper operation, the Speed Control When engaged, the Speed Control takes over accelerator System has been designed to shut down if multiple Speed operations at speeds greater than 20 mph (32 km/h). Control functions are operated at the same time.
Page 321: To Set A Desired Speed
STARTING AND OPERATING Display” in “Getting To Know Your Instrument Panel” for WARNING! more information. The speed increment shown is dependent Leaving the Speed Control system on when not in use is on the chosen speed unit of U.S. (mph) or Metric (km/h): dangerous.
Page 322: To Accelerate For Passing
320 STARTING AND OPERATING The driver’s preferred units can be selected through the To Accelerate For Passing instrument panel settings. Refer to ”Instrument Cluster Press the accelerator as you would normally. When the pedal Display” in “Getting To Know Your Instrument Panel” for is released, the vehicle will return to the set speed.
Page 323: To Resume Speed
STARTING AND OPERATING To Resume Speed ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED To resume a previously set speed, push the RES button and release. Resume can be used at any speed above 20 mph (32 km/h). To Deactivate A soft tap on the brake pedal, pushing the CANC (cancel) button, or normal brake pressure while slowing the vehicle will deactivate the speed control without erasing the set speed from memory.
Page 324 322 STARTING AND OPERATING ACC will allow you to keep cruise control engaged in light You can change the mode by using the Cruise Control to moderate traffic conditions without the constant need to buttons. The two control modes function differently. Always reset your cruise control.
Page 325: Adaptive Cruise Control (Acc) Operation
STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Does not always fully recognize complex driving • When circumstances do not allow safe driving at a conditions, which can result in wrong or missing constant speed. distance warnings. Adaptive Cruise Control (ACC) Operation •...
Page 326: To Activate/Deactivate
324 STARTING AND OPERATING NOTE: To Activate/Deactivate You cannot engage ACC under the following conditions: Push and release the Adaptive Cruise Control (ACC) on/off • When in Four-Wheel Drive Low button. The ACC menu in the instrument cluster displays • When you apply the brakes “ACC Ready.”...
Page 327: To Set A Desired Acc Speed
STARTING AND OPERATING To turn the system off, push and release the Adaptive Cruise To Set A Desired ACC Speed Control (ACC) on/off button again. At this time, the system When the vehicle reaches the speed desired, push the SET (+) will turn off and the instrument cluster displays “Adaptive button or the SET (-) button and release.
Page 328: To Cancel
326 STARTING AND OPERATING only be determined by the position of the accelerator • The vehicle is placed in NEUTRAL for more than ten pedal. seconds (manual transmission only) • The driver shifts to 1st gear (manual transmission only) To Cancel To Turn Off The following conditions cancel the system: •...
Page 329: To Vary The Speed Setting
STARTING AND OPERATING • ACC cannot be resumed if there is a stationary vehicle U.S. Speed (mph) in-front of your vehicle in close proximity. • Pushing the SET (+) button once will result in a 1 mph increase in set speed. Each subsequent tap of the button WARNING! results in an increase of 1 mph.
Page 330 328 STARTING AND OPERATING To Decrease Speed button is released. The decrease in set speed is reflected in the instrument cluster display. While ACC is set, the set speed can be decreased by pushing the SET (-) button. NOTE: • When you override and push the SET (+) button or SET (-) The driver's preferred units can be selected through the button, the new set speed will be the current speed of the instrument panel settings.
Page 331: Setting The Following Distance In Acc
STARTING AND OPERATING Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance setting and the vehicle speed, ACC calcu- lates and sets the distance to the vehicle ahead.
Page 332 330 STARTING AND OPERATING The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed • The vehicle ahead moves out of your lane or view of the sensor • The distance setting is changed •...
Page 333: Overtake Aid
STARTING AND OPERATING left turn signal and will only be active when passing on the left hand side. ACC Operation At A Stop (Automatic Transmission Only) In the event that the ACC system brings your vehicle to a standstill while following a target vehicle, your vehicle will resume motion without the need for any driver action if the target vehicle starts moving within two seconds of your vehicle coming to a standstill.
Page 334: Adaptive Cruise Control (Acc) Menu
332 STARTING AND OPERATING Adaptive Cruise Control Ready WARNING! When the ACC system is resumed, the driver must When ACC is activated, but the vehicle speed setting has not ensure that there are no pedestrians, vehicles or objects been selected, the display will read “Adaptive Cruise in the path of the vehicle.
Page 335: Display Warnings And Maintenance
STARTING AND OPERATING If weather conditions are not a factor, the driver should Display Warnings And Maintenance examine the sensor. It may require cleaning or removal of an “Wipe Front Radar Sensor In Front Of Vehicle” Warning obstruction. The sensor is located in the center of the vehicle behind the lower grille.
Page 336 334 STARTING AND OPERATING NOTE: recover after the vehicle has left these areas. Under rare conditions, when the camera is not tracking any vehicles or • If the “ACC/FCW Unavailable Wipe Front Radar Sensor” objects in its path this warning may temporarily occur. message occurs frequently (e.g.
Page 337: Precautions While Driving With Acc
STARTING AND OPERATING Precautions While Driving With ACC Offset Driving ACC may not detect a vehicle in the same lane that is offset In certain driving situations, ACC may have detection issues. from your direct line of travel, or a vehicle merging in from In these cases, ACC may brake late or unexpectedly.
Page 338 336 STARTING AND OPERATING Turns And Bends Using ACC On Hills When driving on a curve with ACC engaged, the system When driving on hills, ACC may not detect a vehicle in your may decrease the vehicle speed and acceleration for stability lane.
Page 339 STARTING AND OPERATING Lane Changing Narrow Vehicles ACC may not detect a vehicle until it is completely in the Some narrow vehicles traveling near the outer edges of the lane in which you are traveling. In the illustration shown, lane or edging into the lane are not detected until they have ACC has not yet detected the vehicle changing lanes and it moved fully into the lane.
Page 340: General Information
338 STARTING AND OPERATING Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary vehi- The following regulatory statement applies to all Radio cles. For example, ACC will not react in situations where the Frequency (RF) devices equipped in this vehicle: vehicle you are following exits your lane and the vehicle This device complies with Part 15 of the FCC Rules and with ahead is stopped in your lane.
Page 341: Normal (Fixed Speed) Cruise Control Mode
STARTING AND OPERATING La operación de este equipo está sujeta a las siguientes dos Pushing the Normal (Fixed Speed) Cruise Control on/off condiciones: button will result in turning on (changing to) the Normal (Fixed Speed) Cruise Control mode. 1. es posible que este equipo o dispositivo no cause interfer- encia perjudicial y WARNING! 2.
Page 342 340 STARTING AND OPERATING • If the button is continually pushed, the set speed will To Vary The Speed Setting continue to increase in 10 km/h increments until the To Increase Speed button is released. The increase in set speed is reflected in the instrument cluster display.
Page 343 STARTING AND OPERATING Metric Speed (km/h) • The vehicle speed is less than 15 mph (24 km/h) (manual transmission only). • Pushing the SET (-) button once will result in a 1 km/h decrease in set speed. Each subsequent tap of the button •...
Page 344: Parksense Rear Park Assist - If Equipped
342 STARTING AND OPERATING approximately 12 inches (30 cm) up to 79 inches (200 cm) from PARKSENSE REAR PARK ASSIST — IF EQUIPPED the rear fascia/bumper in the horizontal direction, depending The ParkSense Rear Park Assist system provides visual and on the location, type and orientation of the obstacle.
Page 345 STARTING AND OPERATING If an obstacle is detected in the center rear region, the display will show a single solid arc in the center rear region and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the sound tone will change from slow, to fast, to continuous.
Page 346 344 STARTING AND OPERATING Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Greater than Less than...
Page 347: Enabling And Disabling Parksense
STARTING AND OPERATING WARNING ALERTS Arcs — Right None None None None None 2nd Flashing 1st Flashing Single 1/2- Slow Slow Fast Audible Alert Second Tone None (for rear center (for rear (for rear Fast Continuous Chime (for rear only) center only) center only) center only)
Page 348: Service The Parksense Rear Park Assist System
346 STARTING AND OPERATING When the ParkSense switch is pushed to disable the system, the "PARKSENSE UNAVAILABLE WIPE REAR SENSORS" the instrument cluster display will show the “PARKSENSE or "PARKSENSE UNAVAILABLE SERVICE REQUIRED" OFF” message for approximately five seconds. Refer to message for as long as the vehicle is in REVERSE.
Page 349: Parksense System Usage Precautions
STARTING AND OPERATING bumper. Failure to do so can result in the system misinter- ParkSense System Usage Precautions preting a close object as a sensor problem, causing the NOTE: “PARKSENSE UNAVAILABLE SERVICE REQUIRED” • Ensure that the rear bumper is free of snow, ice, mud, dirt message to be displayed in the instrument cluster display.
Page 350: Parksense Front And Rear Park Assist - If Equipped
348 STARTING AND OPERATING ParkSense can be active only when the gear selector is in CAUTION! REVERSE or DRIVE. If ParkSense is enabled at one of these • ParkSense is only a parking aid and it is unable to gear selector positions, the system will remain active until recognize every obstacle, including small obstacles.
Page 351: Parksense Warning Display
STARTING AND OPERATING ParkSense Warning Display The ParkSense Warning screen will only be displayed if “Sound and Display” is selected from the Customer Programmable Features section of the Uconnect System. Refer to “Uconnect Settings” in “Multimedia” for further information. The ParkSense Warning screen is located within the instru- ment cluster display.
Page 352 350 STARTING AND OPERATING If an obstacle is detected in the left and/or right front region, the display will show a single flashing arc in the left and/or right front region and will produce a fast sound tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the tone will change from fast to continuous.
Page 353 STARTING AND OPERATING The vehicle is close to the obstacle when the display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Continuous Tone WARNING ALERTS FOR REAR Greater than Less than Rear Distance...
Page 354 352 STARTING AND OPERATING WARNING ALERTS FOR REAR Single 1/2- Slow Slow Fast Audible Alert Second Tone None (for rear center (for rear (for rear Fast Continuous Chime (for rear only) center only) center only) center only) Radio Volume Reduced WARNING ALERTS FOR FRONT Front Distance Greater than...
Page 355: Enabling And Disabling Parksense
STARTING AND OPERATING Front Park Assist Audible Alerts When the Front or Rear ParkSense switch is pushed to disable the system, the instrument cluster display ParkSense will turn off the Front Park Assist audible alert will show the “PARKSENSE OFF” message for (chime) after approximately three seconds when an obstacle approximately five seconds.
Page 356: Cleaning The Parksense System
354 STARTING AND OPERATING SENSORS” or “PARKSENSE UNAVAILABLE SERVICE Cleaning The ParkSense System REQUIRED” message. When the gear selector is moved to Clean the ParkSense sensors with water, car wash soap, and REVERSE and the system has detected a faulted condition, a soft cloth.
Page 357 STARTING AND OPERATING • When you move the gear selector to the REVERSE position WARNING! and Front or Rear ParkSense is turned off, the instrument • Drivers must be careful when backing up even when cluster display will show a vehicle graphic with “OFF” in using ParkSense.
Page 358: Parkview Rear Back Up Camera
356 STARTING AND OPERATING Manual Activation Of The Rear View Camera CAUTION! • ParkSense is only a parking aid and it is unable to 1. Go to the Controls screen by pressing the “Controls” recognize every obstacle, including small obstacles. button located on the bottom of the Uconnect display, Parking curbs might be temporarily detected or not and then press “Backup Camera”.
Page 359 STARTING AND OPERATING Whenever the Rear View Camera image is activated Different colored zones indicate the distance to the rear of through the "Backup Camera" button in the "Controls" the vehicle. menu, and the vehicle speed is greater than, or equal to The following table shows the approximate distances for 8 mph (13 km/h), a display timer for the image is initiated.
Page 360: Trailcam System - If Equipped
358 STARTING AND OPERATING TRAILCAM SYSTEM — IF EQUIPPED WARNING! Drivers must be careful when backing up even when Your vehicle may be equipped with a TrailCam that allows using the ParkView Rear Back Up Camera. Always check you to you see an on-screen image of the front view of your carefully behind your vehicle, and be sure to check for vehicle.
Page 361 STARTING AND OPERATING “Uconnect Settings” in “Multimedia” for further informa- is shifted into PARK, the ignition is cycled to the OFF posi- tion. tion, or the touchscreen button “X” to disable display of the TrailCam View is pressed. Manual Activation Of The TrailCam Whenever the TrailCam image is activated through the TrailCam View can be activated via the below methods: Manual Activation Methods, and the vehicle speed is greater...
Page 362: Refueling The Vehicle
360 STARTING AND OPERATING Cleaning The TrailCam Press the “Clean Camera” soft button located on the TrailCam View to wash the TrailCam. • The camera can be washed up to 20 seconds at a time. • The “Clean Camera” system is not available when wind- shield washing is in process.
Page 363: Loose Fuel Filler Cap Message
STARTING AND OPERATING NOTE: WARNING! • When the fuel nozzle “clicks” or shuts off, the fuel tank is • Never have any smoking materials lit in or near the full. vehicle when the fuel door is open or the tank is being filled.
Page 364: Vehicle Loading
362 STARTING AND OPERATING VEHICLE LOADING Payload The payload of a vehicle is defined as the allowable load Certification Label weight a truck can carry, including the weight of the driver, As required by National Highway Traffic Safety Administra- all passengers, options and cargo. tion regulations, your vehicle has a certification label affixed to the driver's side door or pillar.
Page 365: Trailer Towing
STARTING AND OPERATING may show that the GAWR of either the front or rear axles has Rim Size been exceeded but the total load is within the specified This is the rim size that is appropriate for the tire size listed. GVWR.
Page 366: Common Towing Definitions
364 STARTING AND OPERATING To maintain the New Vehicle Limited Warranty coverage, Gross Combination Weight Rating (GCWR) follow the requirements and recommendations in this The GCWR is the total permissible weight of your vehicle manual concerning vehicles used for trailer towing. and trailer when weighed in combination.
Page 367 STARTING AND OPERATING for a more level ride, offering more consistent steering and Frontal Area brake control thereby enhancing towing safety. The addition The frontal area is the maximum height multiplied by the of a friction/hydraulic sway control also dampens sway maximum width of the front of a trailer.
Page 368: Trailer Hitch Classification
366 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
Page 369 STARTING AND OPERATING GCWR (Gross Max. GTW (Gross Max. Trailer Tongue Model Frontal Area Combined Wt. Rating) Trailer Wt.) Wt. (See Note) Sport - Automatic Transmission (Tow 11,100 lbs (5,035 kg) 6,000 lbs (2,722kg) 600 lbs (272 kg) 55 ft (5.11 m Package) Sport - Automatic...
Page 370 368 STARTING AND OPERATING GCWR (Gross Max. GTW (Gross Max. Trailer Tongue Model Frontal Area Combined Wt. Rating) Trailer Wt.) Wt. (See Note) Overland - Automatic Transmission (Tow 11,100 lbs (5,035 kg) 6,000 lbs (2,722 kg) 600 lbs (272 kg) 40 ft (3.72 m Package)
Page 371: Trailer And Tongue Weight
STARTING AND OPERATING NOTE: Trailer And Tongue Weight Remember that everything put into or on the trailer adds to Never exceed the maximum tongue weight stamped on your the load on your vehicle. Also, additional factory-installed bumper or trailer hitch. options or dealer-installed options must be considered as part of the total load on your vehicle.
Page 372 370 STARTING AND OPERATING Towing Requirements — Trailer Brakes WARNING! (Continued) • Do not interconnect the hydraulic brake system or vacuum • Towing any trailer will increase your stopping system of your vehicle with that of the trailer. This could distance.
Page 373: Towing Tips
STARTING AND OPERATING The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. NOTE: • Disconnect trailer wiring connector from the vehicle before launching a boat (or any other device plugged into vehicle’s electrical connect) into water.
Page 374 372 STARTING AND OPERATING If using a manual transmission vehicle for trailer towing, all Electronic Speed Control — If Equipped starts must be in first gear to avoid excessive clutch slippage. • Do not use in hilly terrain or with heavy loads. •...
Page 375: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground Four-Wheel Drive Models See Instructions • Automatic transmission in PARK. Flat Tow NONE • Manual transmission in gear (NOT in NEUTRAL [N]). •...
Page 376 374 STARTING AND OPERATING Shifting Into NEUTRAL (N) CAUTION! (Continued) Use the following procedure to prepare your vehicle for • Tow only in the forward direction. Towing this vehicle recreational towing. backwards can cause severe damage to the transfer case. •...
Page 377 STARTING AND OPERATING 1. Bring the vehicle to a complete stop on level ground. CAUTION! Damage to transmission occur 2. Press and hold the brake pedal. transmission is shifted into PARK with the transfer case 3. Shift the automatic transmission into NEUTRAL or in NEUTRAL (N) and the engine running.
Page 378: Driving Tips
376 STARTING AND OPERATING 6. Turn the engine OFF. DRIVING TIPS 7. Shift the transfer case lever to the desired position. On-Road Driving Tips NOTE: Utility vehicles have higher ground clearance and a When shifting the transfer case out of NEUTRAL (N), the narrower track to make them capable of performing in a engine should remain OFF to avoid gear clash.
Page 379: Off-Road Driving Tips
STARTING AND OPERATING 2. Remove two nuts and one bolt from the underside of the Off-Road Driving Tips vehicle for each of the four brackets. Repeat for other side Side Step Removal — If Equipped of vehicle. NOTE: Prior to off-road usage, the side steps should be removed to prevent damage.
Page 380 378 STARTING AND OPERATING Bumper End Cap Removal — If Equipped The end caps on your vehicle’s front bumper can be removed by following the steps below: NOTE: Bumper end caps are removable on steel bumper only. 1. Loosen the two bolts that retain the GAWR bracket (Bolts #1 and #2) to the end cap using a T45 torx bit screw driver.
Page 381 STARTING AND OPERATING The Basics Of Off-Road Driving CAUTION! Never park your vehicle over dry grass or other You will encounter many types of terrain driving off-road. You should be familiar with the terrain and area before combustible materials. The heat from your vehicle proceeding.
Page 382 380 STARTING AND OPERATING Simultaneous Brake And Throttle Operation Many off-road driving conditions require the simultaneous Deep mud creates a great deal of suction around the tires and use of the brake and throttle (two-footed driving). When is very difficult to get through. You should use DRIVE, with climbing rocks, logs, or other stepped objects, using light the transfer case in the 4L (Low) position to maintain your brake pressure with light throttle will keep the vehicle from...
Page 383 STARTING AND OPERATING pressure before driving on pavement or other hard surfaces. WARNING! Be sure you have a way to reinflate the tires prior to reducing Crossing obstacles can cause abrupt steering system the pressure. loading which could cause you to lose control of your vehicle.
Page 384 382 STARTING AND OPERATING Crossing Logs CAUTION! • Never attempt to straddle a rock that is large enough to To cross a log, approach it at a slight angle (approximately strike your axles or undercarriage. 10 to 15 degrees). This allows one front tire to be on top of the log while the other just starts to climb the log.
Page 385 STARTING AND OPERATING Driving Up Hill CAUTION! Winching or rocking the vehicle off hard objects Once you have determined your ability to proceed and have increases the risk of underbody damage. shifted into the appropriate gear, line your vehicle up for the straightest possible run.
Page 386 384 STARTING AND OPERATING Driving Downhill possible, transverse the incline at an angle heading slightly up or down. Before driving down a steep hill, you need to determine if it is too steep for a safe descent. What is the surface traction? Is WARNING! the grade too steep to maintain a slow, controlled descent? Driving across an incline increases the risk of a rollover,...
Page 387 STARTING AND OPERATING Driving Through Water CAUTION! • Water ingestion into the axles, transmission, transfer Extreme care should be taken crossing any type of water. case, engine or vehicle interior can occur if you drive Water crossings should be avoided, if possible, and only be too fast or through too deep of water.
Page 388 386 STARTING AND OPERATING Crossing Puddles, Pools, Flooded Areas Or Other Standing still a high risk of personal injury and vehicle damage with Water slower water currents in depths greater than the vehicle's running ground clearance. You should never attempt to Puddles, pools, flooded or other standing water areas cross flowing water which is deeper than the vehicle's normally contain murky or muddy waters.
Page 389 STARTING AND OPERATING • Completely inspect the underbody of your vehicle. Check NOTE: tires, body structure, steering, suspension, driveline, and Inspect the clutch vent holes in the manual transmission bell exhaust system for damage. housing for mud and debris and clean as required. •...
Page 390: In Case Of Emergency
IN CASE OF EMERGENCY HAZARD WARNING FLASHERS ASSIST AND SOS SYSTEM — IF EQUIPPED The Hazard Warning flashers switch is located on the instru- ment panel below the climate controls. Push the switch to turn on the Hazard Warning flashers. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency.
Page 391 IN CASE OF EMERGENCY someone who can help. Roadside Assistance will know WARNING! what vehicle you’re driving and its location. Additional ALWAYS obey traffic laws and pay attention to the road. fees may apply for roadside assistance. ALWAYS drive safely with your hands on the steering •...
Page 392 390 IN CASE OF EMERGENCY 3. Once a connection between the vehicle and a SOS oper- NOTE: ator is made, the SOS Call system may transmit the • Your vehicle may be transmitting data as authorized by following important vehicle information to a SOS oper- the subscriber.
Page 393 IN CASE OF EMERGENCY WARNING! (Continued) WARNING! (Continued) • Never place anything on or near the vehicle’s operable • Modifications to any part of the SOS Call system could network and GPS antennas. You could prevent oper- cause the air bag system to fail when you need it. You able network and GPS signal reception, which can could be injured if the air bag system is not there to prevent your vehicle from placing an emergency call.
Page 394 392 IN CASE OF EMERGENCY • LTE (voice/data) or 4G (data) network and/or Global WARNING! Positioning Satellite signals are unavailable or obstructed • Ignoring the Rearview Mirror light could mean you • Equipment malfunction at the SOS operator facility will not have SOS Call services. If the Rearview Mirror light is illuminated, have your authorized dealer •...
Page 395: General Information
IN CASE OF EMERGENCY which can prevent your vehicle from placing an emer- CAUTION! gency call. An operable LTE (voice/data) or 4G (data) To avoid damage to the mirror during cleaning, never network connection and a GPS signal is required for the spray any cleaning solution directly onto the mirror.
Page 396: Bulb Replacement
394 IN CASE OF EMERGENCY eils radio exempts de licence. L'exploitation est autorisée aux La operación de este equipo está sujeta a las siguientes dos deux conditions suivantes: condiciones: 1. l'appareil ne doit pas produire de brouillage, et 1. es posible que este equipo o dispositivo no cause interfer- encia perjudicial y 2.
Page 397 IN CASE OF EMERGENCY Exterior Bulbs Bulb Name Bulb Number Headlamps (2) Premium Head Lamps LED – (Serviced At Authorized Dealer) Sport Front Park/Turn Signal Lamps (2) 7442NALL Premium Front Park/Turn Signal Lamps (2) LED – (Serviced At Authorized Dealer) Base (Overland/Rubicon) Turn Lamp 7440NA Base (Overland/Rubicon) Park DRL Lamp...
Page 398: Bulb Replacement
396 IN CASE OF EMERGENCY 5. Remove lamp from the vehicle. Bulb Replacement NOTE: 6. Remove the lamp from the collar. Lens fogging can occur under certain atmospheric condi- 7. Grasp the bulb and turn a quarter turn counterclockwise. tions. This will usually clear as atmospheric conditions occur to allow the condensation to change back into a vapor.
Page 399 IN CASE OF EMERGENCY Front Park/Turn Signal LED Front Side Marker NOTE: 1. Remove the front wheel liner fasteners to access side We advise referring to an authorized dealer for service. maker screw and electrical connector. 1. Remove the front wheel liner fasteners to access bulb 2.
Page 400 398 IN CASE OF EMERGENCY 2. Pull the outboard side of the lamp rearward, far enough CAUTION! to unsnap the two receptacles on the outboard side of the Do not touch the new bulb with your fingers. Oil lamp housing, from the two plastic snap post retainers in contamination will severely shorten bulb life.
Page 401: Fuses
IN CASE OF EMERGENCY 4. Rotate the appropriate socket a quarter turn counter- WARNING! (Continued) clockwise, then remove it from the housing. • If the replaced fuse blows again, contact an authorized 5. Pull the bulb straight from the socket to replace. dealer.
Page 402: Power Distribution Center (Pdc)
400 IN CASE OF EMERGENCY Power Distribution Center (PDC) The Power Distribution Center is located in the engine compartment near the battery. This center contains cartridge fuses, mini fuses, and relays. The PDC top cover is labeled with each serviceable fuse/relay location, function, and size. NOTE: Fuses for safety systems (marked with *) must be serviced by an authorized dealer.
Page 403 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse – – Spare 40 Amp Green – Starter – 5 Amp Tan Intelligent Battery Sensor (IBS) – 20 Amp Yellow Fuel Pump MTR/FPCM – 5 Amp Tan Security Gateway – –...
Page 404 402 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse – – Spare – – Spare – 10 Amp Red Air Conditioning Clutch (AC CLUTCH) – – Spare Central Body Controller (CBC) 1-INTERIOR 30 Amp Pink – LIGHTS – –...
Page 405 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse – – Spare – 10 Amp Red DIAGNOSTIC PORT Heating Ventilation Air Conditioning Mod (HVAC CTRL MOD)/Steering Column Lock – 10 Amp Red (SCL)/Occupant Classification Module (OCM)/ Driver Presence Detection Module (DPDM) ParkTronics System (PTS)/Infrared Camera –...
Page 406 404 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse Instrument Cluster (IC)/Security GateWay – 15 Amp Blue (SGW) WAKE UP Power Control Relay Control Feed (Electric – 10 Amp Red Stop/Start) – – Spare – 10 Amp Red Infrared Camera (IRCAM) HEATERS –...
Page 407 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse – 10 Amp Red In-Car Temp Sensor/PTC Heater Coil Feed – 20 Amp Yellow Frt Drvr Htd Seat – 20 Amp Yellow Frt Pass Htd Seat – – Spare Comfort Steering Wheel Module (CSWM) (HTD –...
Page 408 406 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse – – Spare – – Spare – – Spare – 20 Amp Yellow ECM (GAS)/PCM (DSL) – 10 Amp Red Heated Mirrors – – Spare – 20 Amp Yellow SMART BAR CTRL MOD Powertrain Control Module (PCM)/Solenoid 1 2 –...
Page 409 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse Steering Column Control Module (SCCM)/ – 10 Amp Red Cruise Control (CRUISE CTL)/Digital TV (DTV)/Airbag Disable Lamp 20 Amp Blue – TRAILER TOW PARK LMP - If Equipped – 20 Amp Yellow Horn 40 Amp Green –...
Page 410 408 IN CASE OF EMERGENCY Cavity Micro Fuse Description Cartridge Fuse Integrated Center Stack (ICS)/Heat Ventilation F105 – 10 Amp Red Air Conditioning (HVAC) F106 50 Amp Red – Electronic Speed Control (ESC)/PUMP MTR F107 – 20 Amp Yellow TRAILER TOW STOP/TURN LT - If Equipped F108 –...
Page 411: Jacking And Tire Changing
IN CASE OF EMERGENCY JACKING AND TIRE CHANGING Jack Location The jack and jack tools are stored under the right rear seat. To WARNING! remove jack and tools proceed as follows: • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Page 412 410 IN CASE OF EMERGENCY 3. Release the tool bag straps from the jack and remove tools 4. Remove tool kit and assemble tools. from bag. Jack And Tool Bag Jack And Tool Bag...
Page 413 IN CASE OF EMERGENCY There are two ways to assemble the tools: CAUTION! • The lug wrench can only be attached to extension 2. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 4 is positioned correctly over the winch mechanism adjusting nut.
Page 414: Spare Tire Removal
412 IN CASE OF EMERGENCY 2. Insert the extension tube through the access hole between WARNING! the lower tailgate and the top of the bumper and into the After using the jack and tools, always reinstall them in the winch mechanism tube. original carrier and location.
Page 415 IN CASE OF EMERGENCY 3. Rotate the lug wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle. Inserting The Extension Tubes Into The Access Hole Rotating The Lug Wrench Handle...
Page 416 414 IN CASE OF EMERGENCY 4. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Pulling The Retainer Through The Center Of The Wheel NOTE: Pulling The Spare Tire Out The winch mechanism is designed for use with the extension 5.
Page 417: Preparations For Jacking
IN CASE OF EMERGENCY Preparations For Jacking 1. Park on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid being hit when operating the jack or changing the wheel.
Page 418: Jacking Instructions
416 IN CASE OF EMERGENCY Jacking Instructions WARNING! (Continued) • If working on or near a roadway, be extremely careful WARNING! of motor traffic. Carefully follow these tire changing warnings to help • To assure that spare tires, flat or inflated, are securely prevent personal injury or damage to your vehicle: stowed, spares must be stowed with the valve stem •...
Page 419 IN CASE OF EMERGENCY 4. Operate the jack from the front or the rear of the vehicle. CAUTION! Place the jack under the axle tube, as shown. Do not raise Do not attempt to raise the vehicle by jacking on the vehicle until you are sure the jack is fully engaged.
Page 420 418 IN CASE OF EMERGENCY Front Jacking Location Rear Jacking Location CAUTION! Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. 5. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the ground surface and enough clearance is obtained to install the spare tire.
Page 421 IN CASE OF EMERGENCY 10. Finish tightening the lug nuts. Push down on the wrench WARNING! while tightening for increased leverage. Alternate nuts Raising the vehicle higher than necessary can make the until each nut has been tightened twice. Refer to “Torque vehicle less stable.
Page 422: To Stow The Flat Or Spare
420 IN CASE OF EMERGENCY To Stow The Flat Or Spare WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided.
Page 423 IN CASE OF EMERGENCY Lug Wrench And Extension Tubes Assembled And Rotating The Lug Wrench Handle In Position NOTE: 4. Rotate the lug wrench handle clockwise until the wheel is The winch mechanism is designed for use with the extension drawn into place against the underside of the vehicle.
Page 424: Reinstalling The Jack And Tools
422 IN CASE OF EMERGENCY 5. Turn the wing bolt clockwise to secure to the floor pan. Reinstalling The Jack And Tools 1. Tighten the jack all the way down by turning the jack turn-screw counterclockwise until the jack is snug. 2.
Page 425: Jump Starting
IN CASE OF EMERGENCY JUMP STARTING Preparations For Jump Start If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully.
Page 426 424 IN CASE OF EMERGENCY WARNING! (Continued) • Battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 Volts. Do not allow cable clamps to touch each other.
Page 427 IN CASE OF EMERGENCY NOTE: WARNING! The positive battery post is covered with a protective cap. • Take care to avoid the radiator cooling fan whenever Lift up on the cap to gain access to the post. the hood is raised. It can start anytime the ignition switch is ON.
Page 428: Jump Starting Procedure
426 IN CASE OF EMERGENCY Connecting The Jumper Cables WARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump Starting Procedure WARNING! Failure to follow this jump starting procedure could result in personal injury or property damage due to battery explosion.
Page 429 IN CASE OF EMERGENCY 4. Connect the opposite end of the negative (-) jumper cable Disconnecting The Jumper Cables to a good engine ground (exposed metal part of the 1. Disconnect the negative (-) end of the jumper cable from discharged vehicle’s engine) away from the battery and the engine ground of the vehicle with the discharged the fuel injection system.
Page 430: If Your Engine Overheats
428 IN CASE OF EMERGENCY NOTE: CAUTION! There are steps that you can take to slow down an impending Accessories plugged into the vehicle power outlets draw overheat condition: power from the vehicle’s battery, even when not in use • If your Air Conditioner (A/C) is on, turn it off. The A/C (i.e., cellular devices, etc.).
Page 431: Manual Park Release
IN CASE OF EMERGENCY 2. Using a small screwdriver or similar tool, remove the MANUAL PARK RELEASE manual park release cover located in front of the gear WARNING! selector, to access the release tether strap. Always secure your vehicle by fully applying the parking brake before activating the Manual Park Release.
Page 432: Freeing A Stuck Vehicle
430 IN CASE OF EMERGENCY 3. Fish the tether strap up through the opening in the To Reset The Manual Park Release: console base. 1. Pull upward on the tether strap, releasing it from the “locked” position. 2. Lower the Manual Park Release lever downward and to the right, into its original position.
Page 433 IN CASE OF EMERGENCY NOTE: CAUTION! • For vehicles with automatic transmission: Shifts between • Racing the engine or spinning the wheels may lead to DRIVE (D) and REVERSE (R) can only be achieved at transmission overheating and failure. Allow the engine wheel speeds of 5 mph (8 km/h) or less.
Page 434: Towing A Disabled Vehicle
432 IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. If the transmission and drivetrain are operable, disabled vehicles may also be towed as described under “Recreational Towing” in the “Starting And Operating”...
Page 435: Four-Wheel Drive Models
IN CASE OF EMERGENCY CAUTION! CAUTION! • Do not use sling type equipment when towing. Vehicle • Front or rear wheel lifts must not be used (if the damage may occur. remaining wheels are on the ground). Internal damage to the transmission or transfer case will occur if a front •...
Page 436: Emergency Tow Hooks - If Equipped
434 IN CASE OF EMERGENCY Emergency Tow Hooks — If Equipped If your vehicle is equipped with tow hooks, they are mounted in the front and the rear bumpers. NOTE: For off-road recovery, it is recommended to use both of the front tow hooks to minimize the risk of damage to the vehicle.
Page 437: Enhanced Accident Response System (Ears)
IN CASE OF EMERGENCY EVENT DATA RECORDER (EDR) CAUTION! Tow hooks are for emergency use only, to rescue a This vehicle is equipped with an Event Data Recorder (EDR). vehicle stranded off road. Do not use tow hooks for tow The main purpose of an EDR is to record data that will assist truck hookup or highway towing.
Page 438: Servicing And Maintenance
SERVICING AND MAINTENANCE odometer and a single chime will sound, indicating that an SCHEDULED SERVICING oil change is necessary. Your vehicle is equipped with an automatic oil change indi- An authorized dealer will reset the oil change indicator cator system. The oil change indicator system will remind message after completing the scheduled oil change.
Page 439: Maintenance Plan
SERVICING AND MAINTENANCE Once A Month Or Before A Long Trip: Maintenance Plan • Check engine oil level Required Maintenance Intervals • Check windshield washer fluid level Refer to the maintenance plan on the following pages for the • Check the tire inflation pressures and look for unusual required maintenance intervals.
Page 440 438 SERVICING AND MAINTENANCE NOTE: Using white lithium grease, lubricate the door hinge joints twice a year to prevent premature wear. Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, rear suspension, tie rod ends, and replace if necessary.
Page 441 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace spark plugs – 3.6L Engine. Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km), whichever comes first. Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, snow plowing, heavy loading, taxi, police, delivery...
Page 442: Heavy Duty Use Of The Vehicle
440 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change front and rear axle fluid if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. 1. The spark plug change interval is mileage based only, yearly intervals do not apply. Heavy Duty Use Of The Vehicle WARNING! •...
Page 443: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L Engine 1 — Power Distribution Center (Fuses) 6 — Engine Coolant Pressure Cap 2 — Battery 7 — Brake Fluid Reservoir 3 — Engine Oil Dipstick 8 — Washer Fluid Reservoir 4 — Engine Oil Fill 9 —...
Page 444: Checking Oil Level
442 SERVICING AND MAINTENANCE washer fluid and apply it to a cloth or towel and wipe clean Checking Oil Level the wiper blades; this will help blade performance. To ensure proper lubrication of your vehicle's engine, the To prevent freeze-up of your windshield washer system in engine oil must be maintained at the correct level.
Page 445 SERVICING AND MAINTENANCE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn • It is essential when replacing the cables on the battery or even blind you. Do not allow battery fluid to contact that the positive cable is attached to the positive post your eyes, skin, or clothing.
Page 446: Pressure Washing
444 SERVICING AND MAINTENANCE Pressure Washing WARNING! You can be badly injured working on or around a motor CAUTION! vehicle. Only do service work for which you have the Cleaning the engine compartment with a high pressure knowledge and the proper equipment. If you have any washer is not recommended.
Page 447 SERVICING AND MAINTENANCE Lubricants which do not have both the engine oil certifica- American Petroleum Institute (API) Engine Oil tion mark and the correct SAE viscosity grade number Identification Symbol should not be used. This symbol means that the oil has been certified by the American Petroleum Institute (API).
Page 448: Engine Oil Filter
446 SERVICING AND MAINTENANCE Contact an authorized dealer, service station, or govern- NOTE: mental agency for advice on how and where used oil and oil Be sure to follow the “Severe Duty Conditions” maintenance filters can be safely discarded in your area. interval if applicable.
Page 449 SERVICING AND MAINTENANCE 2. Lift the air cleaner cover to access the air cleaner filter. Engine Air Cleaner Filter Inspection and Replacement Follow the recommended maintenance intervals as shown in the Maintenance Schedule in this section. Engine Air Cleaner Filter Removal 1.
Page 450: Accessory Drive Belt Inspection
448 SERVICING AND MAINTENANCE 3. Remove the air cleaner filter element from the housing 1. Install the air cleaner filter element into the housing assembly. assembly with the air cleaner filter inspection surface facing downward. 2. Tighten air cleaner cover retainers using a suitable tool. Accessory Drive Belt Inspection WARNING! •...
Page 451: Air Conditioner Maintenance
SERVICING AND MAINTENANCE cracks running along a rib (not across) are not normal. Any • “Groove jumping" (belt does not maintain correct position belt with cracks running along a rib must be replaced. In on pulley) addition, have the belt replaced if it has excessive wear, •...
Page 452 450 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling R-134a-If Equipped WARNING! • Use only refrigerants and compressor lubricants R-134a Air Conditioning Refrigerant is a hydrofluorocarbon approved by the manufacturer for your air condi- (HFC) that is an ozone-friendly substance. The manufacturer tioning system.
Page 453 SERVICING AND MAINTENANCE Air Conditioning (A/C) Filter Replacement WARNING! Do not remove the cabin air filter while the vehicle is running, or while the ignition is in the ACC or ON/RUN mode. With the cabin air filter removed and the blower operating, the blower can contact hands and may propel dirt and debris into your eyes, resulting in personal injury.
Page 454 452 SERVICING AND MAINTENANCE 4. Disengage the two retaining tabs that secure the air filter access door to the HVAC housing. Air Filter 6. Install the A/C air filter with the air filter position indica- tors pointing in the same direction as removal. Air Filter Retaining Tabs 5.
Page 455: Body Lubrication
SERVICING AND MAINTENANCE 7. Close A/C air filter access door and secure retaining tabs. Body Lubrication 8. Rotate the glove compartment door back into position, Locks and all body pivot points, including such items as seat ensuring you have properly engaged the travel damper. tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors, and hood hinges should be lubricated periodically with a lithium-based grease, such as Mopar...
Page 456 454 SERVICING AND MAINTENANCE Operation of the wipers on dry glass for long periods may The wiper blades and wiper arms should be inspected peri- cause deterioration of the wiper blades. Always use washer odically, not just when wiper performance problems are fluid when using the wipers to remove salt or dirt from a dry experienced.
Page 457 SERVICING AND MAINTENANCE 2. To disengage the wiper blade from the wiper arm, press Wiper Blade Removal/Installation the release tab on the wiper blade, and while holding the CAUTION! wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.
Page 458: Exhaust System
456 SERVICING AND MAINTENANCE Installing The Front Wipers connections could permit exhaust fumes to seep into the passenger compartment. In addition, have the exhaust 1. Lift the wiper arm off of the glass, until the wiper arm is system inspected each time the vehicle is raised for lubrica- in the full up position.
Page 459: Cooling System
SERVICING AND MAINTENANCE To minimize the possibility of catalytic converter damage: CAUTION! (Continued) • Do not interrupt the ignition when the transmission is in • Damage to the catalytic converter can result if your gear and the vehicle is in motion. vehicle is not kept in proper operating condition.
Page 460 458 SERVICING AND MAINTENANCE Cooling System — Drain, Flush, And Refill WARNING! (Continued) NOTE: • When working near the radiator cooling fan, discon- Some vehicles require special tools to add coolant properly. nect the fan motor lead or turn the ignition to the OFF Failure to fill these systems properly could lead to severe mode.
Page 461 SERVICING AND MAINTENANCE (antifreeze). If a non-OAT engine coolant (antifreeze) is nance period, it is important that you use the same engine introduced into the cooling system in an emergency, the coolant (OAT coolant conforming to MS.90032) throughout cooling system will need to be drained, flushed, and the life of your vehicle.
Page 462 460 SERVICING AND MAINTENANCE NOTE: WARNING! • It is the owner's responsibility to maintain the proper level • Do not open hot engine cooling system. Never add of protection against freezing according to the tempera- engine coolant (antifreeze) when the engine is over- tures occurring in the area where the vehicle is operated.
Page 463 SERVICING AND MAINTENANCE radiator and being vaporized when the thermostat opens, Coolant Level allowing hot engine coolant (antifreeze) to enter the radiator. The coolant bottle provides a quick visual method for deter- mining that the coolant level is adequate. With the engine in If an examination of your engine compartment shows no the OFF mode and cold, the level of the engine coolant (anti- evidence of radiator or hose leaks, the vehicle may be safely...
Page 464: Brake System
462 SERVICING AND MAINTENANCE • Do not change the thermostat for Summer or Winter oper- Fluid Level Check — Brake Master Cylinder ation. If replacement is ever necessary, install ONLY the The fluid level of the master cylinder should be checked correct type thermostat.
Page 465: Front/Rear Axle Fluid
SERVICING AND MAINTENANCE Front/Rear Axle Fluid WARNING! (Continued) • To avoid contamination from foreign matter or mois- For normal service, periodic fluid level checks are not ture, use only new brake fluid or fluid that has been in required. When the vehicle is serviced for other reasons the a tightly closed container.
Page 466: Transfer Case
464 SERVICING AND MAINTENANCE Transfer Case Drain And Refill Refer to the “Maintenance Plan” located in “Scheduled Selection Of Lubricant Servicing” in “Servicing And Maintenance” for the proper Use only the manufacturer's recommended fluid. Refer to maintenance intervals. “Fluids And Lubricants” in “Technical Specifications” for further information.
Page 467: Automatic Transmission - If Equipped
SERVICING AND MAINTENANCE Frequency Of Fluid Change CAUTION! Using a transmission fluid other than the manufacturer’s Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the recommended fluid cause deterioration transmission shift quality and/or torque converter vehicle.
Page 468: Raising The Vehicle
466 SERVICING AND MAINTENANCE Fluid Level Check Fluid And Filter Changes The fluid level is preset at the factory and does not require Under normal operating conditions, the fluid installed at the adjustment under normal operating conditions. Routine factory will provide satisfactory lubrication for the life of the fluid level checks are not required;...
Page 469 SERVICING AND MAINTENANCE NOTE: Tire Markings • P (Passenger) — Metric tire sizing is based on US design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Example: P215/65R15 95H. • European — Metric tire sizing is based on European design standards.
Page 470 468 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 471 SERVICING AND MAINTENANCE EXAMPLE: H = Speed Symbol • A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain oper- ating conditions • The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire:...
Page 472 470 SERVICING AND MAINTENANCE EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation • This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 473 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition The vehicle B-Pillar is the structural member of the body located behind B-Pillar the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile Cold Tire Inflation Pressure (1.6 km) after sitting for a minimum of three hours.
Page 474 472 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver's side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recom- mended pressure for your vehicle.
Page 475 SERVICING AND MAINTENANCE Tire And Loading Information Placard Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire's load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pres- sures specified on the Tire and Loading Information placard in “Vehicle Loading”...
Page 476 474 SERVICING AND MAINTENANCE Steps For Determining Correct Load Limit— (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this (1) Locate the statement “The combined weight of occu- manual to determine how this reduces the available cargo pants and cargo should never exceed XXX kg or XXX lbs.”...
Page 477 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 478: Tires - General Information
476 SERVICING AND MAINTENANCE Tires — General Information WARNING! (Continued) • Overinflated or underinflated tires can affect vehicle Tire Pressure handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and satis- vehicle control.
Page 479 SERVICING AND MAINTENANCE Fuel Economy CAUTION! After inspecting or adjusting the tire pressure, always Underinflated tires will increase tire rolling resistance reinstall the valve stem cap. This will prevent moisture resulting in higher fuel consumption. and dirt from entering the valve stem, which could Tread Wear damage the valve stem.
Page 480 478 SERVICING AND MAINTENANCE Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) Radial Ply Tires during operation. DO NOT reduce this normal pressure WARNING! build up or your tire pressure will be too low. Combining radial ply tires with other types of tires on Tire Pressures For High Speed Operation your vehicle will cause your vehicle to handle poorly.
Page 481 SERVICING AND MAINTENANCE Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive 50 miles When stuck in mud, sand, snow, or ice conditions, do not (80 km) at 50 mph (80 km/h) after a rapid loss of inflation spin your vehicle's wheels above 30 mph (48 km/h), or for pressure.
Page 482 480 SERVICING AND MAINTENANCE Refer to “Replacement Tires” in this section for further infor- Tread Wear Indicators mation. Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: •...
Page 483 SERVICING AND MAINTENANCE NOTE: It is recommended to replace the two front tires or two rear Wheel Valve Stem must be replaced as well when installing tires as a pair. Replacing just one tire can seriously affect new tires due to wear and tear in existing tires. your vehicle’s handling.
Page 484: Tire Types
482 SERVICING AND MAINTENANCE Summer Or Three Season Tires — If Equipped WARNING! (Continued) Summer tires provide traction in both wet and dry condi- • Never use a tire with a smaller load index or capacity, tions, and are not intended to be driven in snow or on ice. If other than what was originally equipped on your your vehicle is equipped with Summer tires, be aware, these vehicle.
Page 485: Spare Tires - If Equipped
SERVICING AND MAINTENANCE Spare Tires — If Equipped Snow Tires Some areas of the country require the use of snow tires NOTE: during the Winter. Snow tires can be identified by a “moun- For vehicles equipped with Tire Service Kit instead of a spare tain/snowflake”...
Page 486 484 SERVICING AND MAINTENANCE Compact Spare Tire — If Equipped WARNING! The compact spare is for temporary emergency use only. Compact and collapsible spares are for temporary You can identify if your vehicle is equipped with a compact emergency use only. With these spares, do not drive spare by looking at the spare tire description on the Tire and more than 50 mph (80 km/h).
Page 487: Wheel And Wheel Trim Care
SERVICING AND MAINTENANCE Wheel And Wheel Trim Care Limited Use Spare — If Equipped The limited use spare tire is for temporary emergency use All wheels and wheel trim, especially aluminum and chrome only. This tire is identified by a label located on the limited plated wheels, should be cleaned regularly using mild use spare wheel.
Page 488: Tire Chains (Traction Devices)
486 SERVICING AND MAINTENANCE When cleaning extremely dirty wheels, including excessive Dark Vapor Chrome, Black Satin Chrome, or Low Gloss Clear Coat Wheels brake dust, care must be taken in the selection of tire and wheel cleaning chemicals and equipment to prevent damage CAUTION! to the wheels.
Page 489: Tire Rotation Recommendations
SERVICING AND MAINTENANCE WARNING! CAUTION! (Continued) Using tires of different size and type (M+S, Snow) • Observe the traction device manufacturer’s instruc- between front and rear axles can cause unpredictable tions on the method of installation, operating speed, handling. You could lose control and have a collision. and conditions for use.
Page 490: Department Of Transportation Uniform
488 SERVICING AND MAINTENANCE The suggested rotation method is the “rearward-cross” DEPARTMENT OF TRANSPORTATION UNIFORM shown in the following diagram. TIRE QUALITY GRADES The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire's manufacturer in each category is shown on the sidewall of the tires on your vehicle.
Page 491: Traction Grades
SERVICING AND MAINTENANCE corresponds to a level of performance, which all Traction Grades passenger vehicle tires must meet under the Federal The Traction grades, from highest to lowest, are AA, A, B, Motor Vehicle Safety Standard No. 109. Grades B and A and C.
Page 492 490 SERVICING AND MAINTENANCE • Any time you store your vehicle or keep it out of service WARNING! (Continued) (i.e., vacation) for two weeks or more, run the air condi- • Vehicles with the Stop/Start system will be equipped tioning system at idle for about five minutes in the fresh air with two batteries.
Page 493: Bodywork
SERVICING AND MAINTENANCE NOTE: What Causes Corrosion? • You must isolate the supplemental battery connection Corrosion is the result of deterioration or removal of paint point, as well as the main battery terminal from the post, and protective coatings from your vehicle. as shown in the image, to fully de-energize both batteries for storage.
Page 494: Preserving The Bodywork
492 SERVICING AND MAINTENANCE Do not use abrasive cleaning components, solvents, steel Special Care wool, or other aggressive material to clean the lenses. • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. Preserving The Bodywork •...
Page 495 SERVICING AND MAINTENANCE Appearance Care For Fabric Top Models CAUTION! Failure to follow these cautions may cause interior water To maintain the appearance of your vehicle's interior trim and top, follow these precautions: damage, stains or mildew on the top material: •...
Page 496 Mopar Jeep Soft Glass Window Cleaner or window plastic retainer should be cleaned and lubricated equivalent will safely clean the plastic window without regularly.
Page 497: Interiors
SERVICING AND MAINTENANCE 2. Pull the carpet out from the front to the rear. INTERIORS Carpet Removal Front Carpets: 1. Remove the front grommets. Front Carpet Pulled Away Front Carpet 1 — Grommets...
Page 498 496 SERVICING AND MAINTENANCE 3. Remove the grommets under the front seat. First for the rear carpet and then the front carpet. Rear Underside Of Front Seat 1 — Harness 2 — Carpet Split Front And Rear Carpet Split 5. Finally open the carpet split around seat bracket and then 4.
Page 499 SERVICING AND MAINTENANCE Rear Carpet 5. Remove the jack and tools by turning the wing bolt coun- terclockwise, remove the wing bolt and then lift the 1. Remove the grommets under the front seat (one left and assembly out from under the seat. one right).
Page 500: Seats And Fabric Parts
498 SERVICING AND MAINTENANCE Seats And Fabric Parts WARNING! A frayed or torn belt could rip apart in a collision and Use Mopar Total Clean to clean fabric upholstery and leave you with no protection. Inspect the belt system carpeting. periodically, checking for cuts, frays, or loose parts.
Page 501: Leather Parts
SERVICING AND MAINTENANCE NOTE: Cleaning Plastic Instrument Cluster Lenses If equipped with light colored leather, it tends to show any The lenses in front of the instruments in this vehicle are foreign material, dirt, and fabric dye transfer more so than molded in clear plastic.
Page 502: Technical Specifications
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is found on the left front corner of the A pillar, visible from outside of the vehicle through the windshield. This number also appears under- body, on the right side of the frame rail near the center of the vehicle, as well as on the Automobile Information Disclosure Label affixed to a window on your vehicle.
Page 503: Brake System
TECHNICAL SPECIFICATIONS BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS Your vehicle is equipped with dual hydraulic brake systems. Proper lug nut/bolt torque is very important to ensure that If either of the two hydraulic systems loses normal capa- the wheel is properly mounted to the vehicle. Any time a bility, the remaining system will still function.
Page 504 502 TECHNICAL SPECIFICATIONS Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Torque Patterns After 25 miles (40 km), check the lug nut/bolt torque to be Wheel Mounting Surface sure that all the lug nuts/bolts are properly seated against the wheel.
Page 505: Fuel Requirements
TECHNICAL SPECIFICATIONS Poor quality gasoline can cause problems such as hard FUEL REQUIREMENTS starting, stalling, and hesitations. If you experience these 3.6L Engine symptoms, try another brand of gasoline before considering service for the vehicle. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline”.
Page 506: Gasoline/Oxygenate Blends
504 TECHNICAL SPECIFICATIONS Designated TOP TIER Detergent Gasoline contains a Problems that result from using gasoline containing more higher level of detergents to further aide in mini- than 15% ethanol (E-15) or gasoline containing methanol are mizing engine and fuel system deposits. When avail- not the responsibility of the manufacturer and may void or able, the usage of TOP TIER Detergent gasoline is not be covered under New Vehicle Limited Warranty.
Page 507: Cng And Lp Fuel System Modifications
TECHNICAL SPECIFICATIONS CNG And LP Fuel System Modifications Fuel System Cautions Modifications that allow the engine to run on Compressed CAUTION! Natural Gas (CNG) or Liquid Propane (LP) may result in Follow these guidelines to maintain your vehicle’s damage to the engine, emissions, and fuel system compo- performance: nents.
Page 508: Carbon Monoxide Warnings
506 TECHNICAL SPECIFICATIONS NOTE: WARNING! (Continued) Intentional tampering with the emissions control system can • Guard against carbon monoxide with proper mainte- result in civil penalties being assessed against you. nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions Carbon Monoxide Warnings repaired promptly.
Page 509: Fluid Capacities
TECHNICAL SPECIFICATIONS FLUID CAPACITIES U.S. Metric Fuel (Approximate) 22 Gallons 83 Liters Engine Oil with Filter 3.6L Engine 5 Quarts 4.73 Liters Cooling System * 3.6L Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile 11.2 Quarts 10.6 Liters Formula or equivalent) *Includes coolant recovery bottle filled to MAX level.
Page 510 508 TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar Engine Oil Filter or Engine Oil Filter equivalent. Spark Plugs We recommend you use Mopar Spark Plugs. Fuel Selection — 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% Ethanol. CAUTION! CAUTION! (Continued) •...
Page 511: Chassis
TECHNICAL SPECIFICATIONS Chassis Component Fluid, Lubricant, or Genuine Part Use only Mopar ZF 8 & 9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct Automatic Transmission – If Equipped fluid may affect the function or performance of your transmission.
Page 512: Multimedia
MULTIMEDIA improve the usability and performance of your systems or to UCONNECT SYSTEMS reduce the potential risk of unauthorized and unlawful For detailed information about your Uconnect system, refer access to your vehicle systems. to your Uconnect Owner’s Manual Supplement. The risk of unauthorized and unlawful access to your vehicle NOTE: systems may still exist, even if the most recent version of...
Page 513: Uconnect Settings
MULTIMEDIA UCONNECT SETTINGS WARNING! (Continued) • As always, if you experience unusual vehicle behavior, The Uconnect system uses a combination of buttons on the take your vehicle to your nearest authorized dealer touchscreen and buttons on the faceplate, located on the immediately.
Page 514: Customer Programmable Features
512 MULTIMEDIA Push the Settings button to display the settings menu screen. Customer Programmable Features — Uconnect 3 In this mode, the Uconnect system allows you to access all of Settings the available programmable features. NOTE: Only one touchscreen area may be selected at a time. When making a selection, press the button on the touch- screen to enter the desired mode.
Page 515 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following settings will be available: Setting Name Selectable Options Language English Español Français Display After pressing the Display button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode Auto...
Page 516 514 MULTIMEDIA Clock & Date After pressing the Clock & Date button on the touchscreen, the following settings will be available: Setting Name Selectable Options 12 hr 24 hr Set Time and Format NOTE: Within the “Set Time and Format” setting, press the corresponding arrow buttons on the touchscreen to adjust to the correct time.
Page 517 MULTIMEDIA Setting Name Selectable Options ParkView Backup Camera Active Guide Lines NOTE: The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering wheel posi- tion when the option is checked.
Page 518 516 MULTIMEDIA Setting Name Selectable Options Front ParkSense - If Medium High Equipped Rear ParkSense Volume Medium High — If Equipped Blind Spot Alert — If Lights Lights & Chime Equipped NOTE: If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become misaligned.
Page 519 MULTIMEDIA Setting Name Selectable Options Headlight Illumination On Approach Automatic High Beam Headlamps — If Equipped Daytime Running Lights NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. The feature is only available if allowed by law in the country of the vehicle purchase.
Page 520 518 MULTIMEDIA Setting Name Selectable Options Auto Unlock On Exit NOTE: When this feature is selected, all doors will unlock when the vehicle is stopped and the driver's door is opened when the transmission is in the PARK or NEUTRAL position. Flash Lights With Lock Sound Horn With Lock —...
Page 521 MULTIMEDIA Auto-On Comfort Systems — If Equipped After pressing the Auto-On Comfort Systems button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated Seat & Steering Wheel With Vehicle Start — If Remote Start All Starts Equipped NOTE:...
Page 522 520 MULTIMEDIA Aux Switches After pressing the “Aux Switches” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Type Latching Momentary Aux 1-4 Power Source Battery Ignition Recalled Last State NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition. Compass Settings —...
Page 523 MULTIMEDIA Setting Name Selectable Options Perform Compass Calibration NOTE: Press the “Calibration” button on the touchscreen to change this setting. This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic until it is calibrated. You may also calibrate the compass by pressing the “ON”...
Page 524 522 MULTIMEDIA Setting Name Selectable Options Speed Adjusted Volume Surround Sound — If Equipped Loudness NOTE: The “Loudness” feature improves sound quality at lower volumes when enabled. AUX Volume Offset — If Equipped NOTE: The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the AUX input.
Page 525 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Channel Skip List of Channels NOTE: SiriusXM® can be programmed to designate a group of channels that are the most desirable to listen to or to exclude unde- sirable channels while scanning.
Page 526 524 MULTIMEDIA Restore Settings To Default After pressing the Restore Settings To Default button on the touchscreen, the following settings will be available: Setting Name Selectable Options Restore Settings To Default Cancel NOTE: When the “Restore Settings” feature is selected, it will reset all settings to their default settings. Clear Personal Data After pressing the Clear Personal Data button on the touchscreen, the following settings will be available: Setting Name...
Page 527: Customer Programmable Features
MULTIMEDIA NOTE: Customer Programmable Features — Uconnect 4 Settings • Only one touchscreen area may be selected at a time. • Depending on the vehicles options, feature settings may vary. When making a selection, press the button on the touch- screen to enter the desired mode.
Page 528 526 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following settings will be available: Setting Name Selectable Options Language English Espanol Francais Display After pressing the Display button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode...
Page 529 MULTIMEDIA Units After pressing the Units button on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom NOTE: • The “Metric” option changes the Instrument Cluster Display to metric units of measure. • The “Custom” option allows setting the “Fuel Consumption” (L/100km, or km/L) and “Pressure” (kPa, or bar) units of measure independently.
Page 530 528 MULTIMEDIA Setting Name Selectable Options NOTE: The “Set Time Hours” feature will allow you to adjust the hours. The Sync time with GPS button on the touchscreen must be unchecked. Set Time Minutes NOTE: The “Set Time Minutes” feature will allow you to adjust the minutes. The Sync time with GPS button on the touchscreen must be unchecked.
Page 531 MULTIMEDIA Setting Name Selectable Options Active ParkView Backup Camera NOTE: The “Active ParkView Backup Camera” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its projected backup path, based on the steering wheel position, when the option is checked.
Page 532 530 MULTIMEDIA Setting Name Selectable Options Front ParkSense Volume Medium High Rear ParkSense Volume Medium High Blind Spot Alert — If Equipped Lights Lights & Chime NOTE: If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become misaligned.
Page 533 MULTIMEDIA Setting Name Selectable Options Hill Start Assist Tire Fill Assist Lights After pressing the Lights button on the touchscreen, the following settings will be available: Setting Name Selectable Options 0 sec 30 sec Headlight Off Delay 60 sec 90 sec NOTE: When the “Headlight Off Delay”...
Page 534 532 MULTIMEDIA Setting Name Selectable Options Auto Dim High Beams — If Equipped NOTE: When the “Auto Dim High Beams” feature is selected, the high beam headlights activate/deactivate automatically under certain conditions. Flash Lights With Lock — If Equipped Doors & Locks After pressing the Doors &...
Page 535 MULTIMEDIA Setting Name Selectable Options NOTE: When “Driver” is programmed, only the driver's door will unlock on the first push of the key fob unlock button. You must push the key fob unlock button twice to unlock the passenger's doors. When “All” is programmed, all of the doors will unlock on the first press of the key fob unlock button.
Page 536 534 MULTIMEDIA Aux Switches — If Equipped After pressing the Aux Switches button on the touchscreen, the following settings will be available: Setting Name Selectable Options Type Latching Momentary Aux 1-4 Power Source Battery Ignition Recalled Last State NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition. Audio After pressing the Audio button on the touchscreen, the following settings will be available: Setting Name...
Page 537 MULTIMEDIA Setting Name Selectable Options Speed Adjusted Volume AUX Volume Offset — If Equipped NOTE: This feature provides the ability to tune the audio level for portable devices connected through the AUX input. Loudness NOTE: The “Loudness” feature improves sound quality at lower volumes when enabled. Auto Play NOTE: The “Auto Play”...
Page 538 536 MULTIMEDIA Setting Name Selectable Options Paired Phones And Audio Devices List Of Paired Phones And Audio Devices NOTE: This feature shows which phones and audio devices are paired to the Phone/Bluetooth® system. For further information, refer to “Phone Operation” in Uconnect 4 with 7-inch display” section. Phone Pop-ups Displayed In Cluster SiriusXM®...
Page 539 MULTIMEDIA Restore Settings To Default After pressing the Restore Settings To Default button on the touchscreen, the following settings will be available: Setting Name Selectable Options Restore Settings To Default Cancel NOTE: When this feature is selected it will reset all settings to their default settings. Clear Personal Data After pressing the Clear Personal Data button on the touchscreen, the following settings will be available: Setting Name...
Page 540: Customer Programmable Features - Uconnect 4C/4C Nav Settings
538 MULTIMEDIA NOTE: Customer Programmable Features — Uconnect 4C/ 4C NAV Settings • Only one touchscreen area may be selected at a time. • Depending on the vehicle’s options, feature settings may vary. When making a selection, press the button on the touch- screen to enter the desired mode.
Page 541 MULTIMEDIA Language After pressing the Language button on the touchscreen, the following settings will be available: Setting Name Selectable Options Set Language English Español Français NOTE: When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all display nomenclature, including the trip functions and the navigation system (if equipped).
Page 542 540 MULTIMEDIA Setting Name Selectable Options Theme Set Theme NOTE: When in this display, you may select the theme for the display screen. To make your selection, press the Set Theme button on the touchscreen, then select the desired theme option button until a check mark appears showing that the setting has been selected.
Page 543 MULTIMEDIA Units After pressing the Units button on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom NOTE: • The “Metric” option changes the instrument cluster display to metric units of measure. • The “Custom” option allows setting the “Fuel Consumption” (L/100km, or km/L), “Pressure” (kPa, or bar), and “Temperature”...
Page 544 542 MULTIMEDIA Setting Name Selectable Options Set Time Hours NOTE: The “Set Time Hours” feature will allow you to adjust the hours. The Sync time with GPS button on the touchscreen must be unchecked. Set Time Minutes NOTE: The “Set Time Minutes” feature will allow you to adjust the minutes. The Sync time with GPS button on the touchscreen must be unchecked.
Page 545 MULTIMEDIA Setting Name Selectable Options ParkView Backup Camera Active Guide Lines NOTE: The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its projected back up path, based on the steering wheel position, when the option is checked.
Page 546 544 MULTIMEDIA Setting Name Selectable Options ParkSense — If Equipped Sound Only Sound & Display NOTE: The Rear Park Assist system scans for objects behind the vehicle when the transmission gear selector is in REVERSE and the vehicle speed is less than 7 mph (11 km/h). Front ParkSense Volume Medium High...
Page 547 MULTIMEDIA Auto-On Comfort — If Equipped After pressing the Auto-On Comfort button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated Seat & Steering Wheel With Vehicle Start — If Remote Start All Starts Equipped NOTE: When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn on when tempera-...
Page 548 546 MULTIMEDIA Setting Name Selectable Options 1st Press Of Key Fob Unlocks Driver Door All Doors NOTE: When "Driver Door" is programmed with 1st Press Of Key Fob Unlocks, only the driver's door will unlock with the first press of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger's doors. When "All Doors"...
Page 549 MULTIMEDIA Aux Switches — If Equipped After pressing the Aux Switches button on the touchscreen, the following settings will be available: Setting Name Selectable Options Type Latching Momentary Aux 1-4 Power Source Battery Ignition Recalled Last State NOTE: Holding last state conditions are met when type is set to latching and power source is set to ignition. Audio After pressing the Audio button on the touchscreen, the following settings will be available: Setting Name...
Page 550 548 MULTIMEDIA Setting Name Selectable Options Speed Adjusted Volume AUX Volume Offset — If Equipped NOTE: This feature provides the ability to tune the audio level for portable devices connected through the AUX input. Phone/Bluetooth® After pressing the Phone/Bluetooth® button on the touchscreen, the following settings will be available: Setting Name Selectable Options Phone Pop-ups Displayed In Cluster...
Page 551 MULTIMEDIA Setting Name Selectable Options 0 sec 30 sec Headlight Off Delay 60 sec 90 sec NOTE: When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.
Page 552 550 MULTIMEDIA Setting Name Selectable Options Interior Ambient Lights NOTE: The “Interior Ambient Lights” setting can also be adjusted by selecting any point on the scale between the + and - buttons on the touchscreen. Auto Dim High Beams — If Equipped NOTE: When the “Auto Dim High Beams”...
Page 553 MULTIMEDIA Setting Name Selectable Options Subscription Info Sirius ID NOTE: New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM® Satellite Radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription Information screen to re-subscribe.
Page 554 552 MULTIMEDIA Setting Name Selectable Options Restore Settings Cancel NOTE: When the “Restore Settings” feature is selected, it will reset all settings to their default settings. Clear Personal Data Cancel NOTE: When the “Clear Personal Data” feature is selected, it will remove all personal data including Bluetooth® devices and presets.
Page 555: Safety And General Information
MULTIMEDIA • Stop use immediately if a problem occurs. Failure to do so SAFETY AND GENERAL INFORMATION may cause injury or damage to the product. Return it to an Safety Guidelines authorized dealer for repair. • Ensure the volume level of the system is set to a level that WARNING! still allows you to hear outside traffic and emergency vehi- ALWAYS drive safely with your hands on the steering...
Page 556: Uconnect 3 With 5-Inch Display
554 MULTIMEDIA Exposure To Radio Frequency Radiation and water solution ratio of 50:50. Be sure to follow the solvent manufacturer's precautions and directions. The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, UCONNECT 3 WITH 5-INCH DISPLAY which reflect the consensus of the scientific community.
Page 557 MULTIMEDIA 2 — COMPASS 7 — MUTE Push the COMPASS button on the faceplate to display the Push the MUTE button to turn off the audio of the radio current direction of the vehicle. system. Press it again to turn the audio back on. 3 —...
Page 558: Radio Mode
556 MULTIMEDIA The radio is equipped with the following modes: Radio Mode • FM Operating Radio Mode • AM • SiriusXM® Radio – If Equipped Push the RADIO button on the faceplate, to enter the Radio Mode. The different tuner modes – FM/AM/SXM (if equipped) –...
Page 559 MULTIMEDIA During a Seek Down function, if the radio reaches the TUNE/SCROLL Control starting station after passing through the entire band two Turn the rotary TUNE/SCROLL control knob clockwise to times, the radio will stop at the station where it began. increase or counterclockwise to decrease the radio station Fast Seek Down frequency.
Page 560 558 MULTIMEDIA every MLB®, every NHL® game, every NASCAR® race, If the screen displays Acquiring Signal, you may need to Martha Stewart, Oprah Radio, and more. Get 20+ extra chan- change the vehicle’s position to receive a signal. In most nels, including SiriusXM®...
Page 561 MULTIMEDIA 3. The Audio Menu shows the following options for you to tive to a decrease in vehicle speed. Press the Back customize your audio settings: Arrow button on the touchscreen when done. • Loudness — Press the Loudness button on the touch- •...
Page 562: Media Mode
560 MULTIMEDIA Media Mode Audio Source Selection Once in Media Mode, press the Source button on the touch- Operating Media Mode screen and the desired mode button on the touchscreen. Disc (if equipped), USB, SD Card (if equipped), AUX and Blue- tooth®...
Page 563 MULTIMEDIA phone, or USB. Press the Exit button on the touchscreen if Seek Up/Seek Down Functions you wish to cancel the Browse function. Seek Up /Seek Down Repeat Press and release the Seek Up button on the touchscreen for the next selection. Press and release the Seek Down button on Press the Repeat button on the touchscreen to repeat the song the touchscreen to return to the beginning of the current selection.
Page 564 562 MULTIMEDIA USB/iPod® Mode Bluetooth® Mode USB/iPod® Mode is entered by either inserting a USB Jump Bluetooth® Streaming Audio (BTSA) or Bluetooth® Mode is Drive or iPod® cable into the USB port, or by pushing the entered by pairing a Bluetooth® device containing music to MEDIA button located on the faceplate.
Page 565: Phone Mode
MULTIMEDIA Inserting Auxiliary Device Phone Mode Gently insert the Auxiliary device cable into the AUX Port. If Operating Phone Mode you insert an Auxiliary device with the ignition on, the unit will switch to AUX mode and begin to play when you insert the device cable.
Page 566 564 MULTIMEDIA The Uconnect Phone is a voice-activated, hands-free, Main Functions in-vehicle communications system with voice command The buttons on the display can be used to: capability. Refer to Voice Recognition (VR) within this publi- cation for further information. • Compose phone numbers using the graphic keypad on the display.
Page 567 MULTIMEDIA 3. Select “Yes” to begin the pairing process. Connecting/Disconnecting A Mobile Phone Or Bluetooth® Device 4. Search for available devices on your Bluetooth®-enabled mobile phone. Pairing A Phone • Press the Settings button on your mobile phone. To begin using your Uconnect Phone, you must pair your compatible Bluetooth®-enabled mobile phone.
Page 568 566 MULTIMEDIA If No is selected and you still would like to pair a mobile will connect to the Uconnect system automatically when phone, press the Settings button from the Uconnect entering the vehicle. Only one mobile phone and/or one Phone main screen.
Page 569 MULTIMEDIA NOTE: Disconnection The names in the phonebook which do not contain phone To disconnect a specific mobile phone or Bluetooth® audio numbers or where both fields (name and surname) are device, proceed as follows: empty will not be displayed. 1.
Page 570 568 MULTIMEDIA 4. Select the device (mobile phone or Bluetooth® device). Downloading A Phonebook From Your Mobile Phone If equipped and specifically supported by your phone, 5. Press the Delete Device button. Uconnect Phone asks you if you want to download names 6.
Page 571 MULTIMEDIA loaded names can be used. Until then, if available, the Proceed as follows: previously downloaded phonebook is available for use. 1. Press the Keyboard icon on the display and use the • Only the phonebook of the currently connected mobile number buttons to enter the number.
Page 572 570 MULTIMEDIA Making A Second Call While Current Call Is In Progress • Transfer the call • Switch from one call to the other When a phone conversation is active, a second phone call can be made as follows: • Conference/merge two active calls •...
Page 573 MULTIMEDIA When the system is switched off, the call is transferred to the Managing Two Phone Calls mobile phone. If two calls are in progress (one active and one on hold), it is possible to switch between them pressing the Call On Hold Ending A Call button or to merge the two calls in a conference pressing the Press the End button on the touchscreen or the PHONE...
Page 574: Uconnect 4 With 7-Inch Display
572 MULTIMEDIA Reading Messages Select the PHONE button on the instrument panel menu, and then select “SMS Reader” using the arrow keys on the The system can read the messages received by the mobile steering wheel controls. phone. The “SMS Reader” submenu allows the last 10 SMS To use this function, the mobile phone must support the SMS messages to be displayed.
Page 575 MULTIMEDIA NOTE: 4. Apps Uconnect screen images are for illustration purposes only Press the Apps button on the touchscreen to access Smart- and may not reflect exact software for your vehicle. phone and Connected vehicle options. 1. Radio 5. Controls Press the Radio button on the touchscreen to enter Radio Press the Controls button on the touchscreen to adjust the Mode.
Page 576: Radio Mode
574 MULTIMEDIA The new app shortcut, that was dragged down onto the main Drag & Drop Menu Bar menu bar, will now be an active App/shortcut. The Uconnect features and services in the main menu bar are easily changed for your convenience. Simply follow these NOTE: steps: This feature is only available if the vehicle is in PARK.
Page 577 MULTIMEDIA The electronic volume control turns continuously (360 degrees) Seek Up in either direction, without stopping. Turning the Volume/ Press and release the Seek Up button on the touchscreen to Power control knob clockwise increases the volume, and coun- tune the radio to the next listenable station or channel. terclockwise decreases it.
Page 578 576 MULTIMEDIA Direct Tune Setting Presets Press the Tune button on the touchscreen located at the The Presets are available for all Radio Modes, and are acti- bottom of the radio screen. The Direct Tune button on the vated by pressing any of the six Preset buttons on the touch- touchscreen is available in AM, FM, and SXM radio modes screen, located at the top of the screen.
Page 579 MULTIMEDIA Preset Selection From List 160 channels of the best programming for all the places life takes you. A Preset can be selected by pressing any of the listed Presets • In your vehicle — You’ll get every channel available on or by pushing the ENTER/BROWSE button on the TUNE/ your radio, including all the premium programming like SCROLL knob to select the currently highlighted Preset.
Page 580 578 MULTIMEDIA fees and programming subject to change. Our satellite Acquiring SiriusXM® Subscription service is available only to those at least 18 and older in the To activate the SiriusXM® Satellite Radio subscription, U.S. 48 contiguous USA and D.C. Our SiriusXM® satellite service residents call: is also available in PR (with coverage limitations).
Page 581 MULTIMEDIA • The Program Information is displayed at the bottom of the Play/Pause Channel Number. Press the Pause/Play button on the touchscreen to pause the • The SiriusXM® function buttons are displayed below the playing of live or rewound content at any time. Play can be Program Information.
Page 582 580 MULTIMEDIA Live Fav. Song: While the song is playing to set a Favorite Song, press the Fav button on the touchscreen and then the Fav Press the Live button on the touchscreen to resume playing Song button on the touchscreen. of Live content.
Page 583 MULTIMEDIA Genre Favorites Press the Genre button on the touchscreen to display a list of Press the Favorites button located at the left of the Browse Genres. You can select any desired Genre by pressing the screen. Genre list, the Radio tunes to a channel with the content in The Favorites menu provides a means to Edit the Favorites the selected Genre.
Page 584 582 MULTIMEDIA Game Zone Alert Settings Press the Game Zone button, located at the left of the Browse Press the Alert Setting tab at the top of the screen. The Alert screen. This feature provides you with the ability to select Settings menu allows you to choose from “Alert me to on-air teams, edit the selection, and set alerts.
Page 585 MULTIMEDIA Balance & Fade Equalizer Balance & Fade Equalizer Press the Balance & Fade button on the touchscreen to Press the Equalizer button on the touchscreen to activate the Balance audio between the front speakers or fade the audio Equalizer screen. between the rear and front speakers.
Page 586 584 MULTIMEDIA Speed Adjusted Volume Surround Sound — If Equipped Press the On button on the touchscreen to activate Surround Sound. Press Off to deactivate this feature. When Surround Sound is On, you can hear audio coming from every direction as in a movie theatre or home theatre system.
Page 587 MULTIMEDIA Loudness AUX Volume Offset Loudness AUX Volume Offset Press the On button on the touchscreen to activate Loudness. Press the AUX Volume Offset button on the touchscreen to Press Off to deactivate this feature. activate the AUX Volume Offset screen. When Loudness is On, the sound quality at lower volumes The AUX Volume Offset is adjusted by pressing of the + and improves.
Page 588 586 MULTIMEDIA Auto Play Radio Off With Door Auto Play Radio Off With Door Press the Auto Play button on the touchscreen to activate the Press the Radio Off With Door button on the touchscreen to Auto Play screen. activate the Radio Off With Door screen. The Auto Play feature has two settings On and Off.
Page 589: Media Mode
MULTIMEDIA center of the browse window shows items and its sub-func- Media Mode tions, which can be scrolled by pressing the Up and Down USB/iPod® Mode buttons to the right. The Tune/Scroll knob can also be used to scroll. Overview Media Mode USB/iPod®...
Page 590 588 MULTIMEDIA Info port or by pressing the AUX button on the left side of the display. Press the Info button on the touchscreen to display the current track information. Press the Info button on the touch- Inserting Auxiliary Device screen a second time to cancel this feature.
Page 591 MULTIMEDIA Media Mode Press the Media button on the touchscreen to select the desired audio source: AUX. Audio Refer to Radio Mode for adjusting the audio settings. BLUETOOTH® MODE Overview Bluetooth® Streaming Audio (BTSA) or Bluetooth® Mode is Bluetooth® Mode entered by pairing a Bluetooth®...
Page 592 590 MULTIMEDIA Tracks Android Auto™ is a feature of your Uconnect system, and your Android 5.0 Lollipop™, or higher, powered smart- If the Bluetooth® device supports this feature, press the phone with a data plan, that allows you to project your Tracks button on the touchscreen to display a pop up with smartphone and a number of its apps onto the touchscreen the Song List.
Page 593 MULTIMEDIA 2. Connect your Android™-powered smartphone to one of 3. Once the device is connected and recognized, the the media USB ports in your vehicle. If the Android “Phone” icon on the drag & drop menu bar changes to the Auto™...
Page 594 592 MULTIMEDIA NOTE: If the VR button is not held, and is only pushed, the built-in Uconnect VR prompts you and any navigation command said launches the built-in Uconnect navigation system. While using Android Auto™, Google Maps™ provides voice-guided: • Navigation •...
Page 595 MULTIMEDIA For further information, refer to www.android.com/auto/ (U.S. Residents) https://www.android.com/intl/en_ca/ auto (Canadian Residents). For further information on the navigation function, please refer to https://support.google.com/android https:// support.google.com/androidauto/. Android Auto™ Music Android Auto™ allows you to access and stream your favorite music with apps like Google Play Music, iHeart- Radio, and Spotify.
Page 596 594 MULTIMEDIA Android Auto™ Communication With Android Auto™ connected, press and hold the VR button on the steering wheel to activate voice recognition specific to the Android Auto™. This will allow you to send and reply to text messages, have incoming text messages read out loud, and place and receive hands-free calls.
Page 597 MULTIMEDIA Apple CarPlay® Integration 2. Once the device is connected and recognized, the “Phone” icon on the drag & drop menu bar changes to the NOTE: Apple CarPlay® Icon. Apple CarPlay® should launch, Feature availability depends on your carrier and mobile but if not, refer to “Android Auto™...
Page 598 596 MULTIMEDIA Once Apple CarPlay® is up and running on your Uconnect Apple CarPlay® Phone system, the following features can be utilized using your With Apple CarPlay®, press and hold the VR button iPhone’s® data plan: on the steering wheel to activate a Siri voice recogni- •...
Page 599 MULTIMEDIA category, by launching Siri from the destinations page, or even by typing in a destination. Apple CarPlay® Messages Just like Phone, Apple CarPlay® allows you to use Apple CarPlay® Maps Siri to send or reply to text messages. Siri can also read incoming text messages, but driver’s will not be NOTE: able to read messages, as everything is done via voice.
Page 600 598 MULTIMEDIA Refer to http://www.apple.com/ios/carplay/ (U.S. Resi- Android Auto Automatic Bluetooth® Pairing dents) or https://www.apple.com/ca/ios/carplay/ (Cana- After connecting to Android Auto™ for the first time and dian Residents) to see the latest list of available apps for undergoing the setup procedure, the smartphone will auto- Apple CarPlay®.
Page 601: Phone Mode
MULTIMEDIA will need to manually change the configuration of the USB 6 — Transfer To/From Uconnect System connection in order for the Samsung device to send data. 7 — Conference Call* 8 — Phone Settings • The Uconnect 4 built-in media functions will be unavail- 9 —...
Page 602 600 MULTIMEDIA • Hands-free text message reply. (Forward one of 18 • Listen to music on your Bluetooth® device via the touch- pre-defined SMS messages to incoming calls/text screen. messages). • Pairing up to 10 phones/audio devices for easy access to •...
Page 603 MULTIMEDIA Uconnect Phone allows you to transfer calls between the Uconnect Phone Button system and your mobile phone as you enter or exit your The Uconnect Phone button on your steering wheel is used vehicle and enables you to mute the system's microphone for to get into the phone mode and make calls, show recent, private conversation.
Page 604 602 MULTIMEDIA You can also break the commands into parts and say each Phone Operation part of the command when you are asked for it. For Operation example, you can use the compound command form voice command “Search for John Smith,” or you can break the Voice commands can be used to operate the Uconnect Phone compound command form into two voice commands: and to navigate through the Uconnect Phone menu struc-...
Page 605 MULTIMEDIA The system utilizes continuous dialog; when the system Pair (Link) Uconnect Phone To A Mobile Phone requires more information from the user it will ask a ques- To begin using your Uconnect Phone, you must pair your tion to which the user can respond without pushing the compatible Bluetooth®...
Page 606 604 MULTIMEDIA 4. Search for available devices on your Bluetooth® enabled If No is selected, and you still would like to pair a mobile mobile phone. phone, press the “Phone Settings” button from the Uconnect Phone main screen. • Press the Settings button on your mobile phone. •...
Page 607 MULTIMEDIA 8. When the pairing process has successfully completed, the 3. Search for available devices on your Bluetooth® enabled system will prompt you to choose whether or not this is mobile phone. When prompted on the phone, enter the your favorite phone. Selecting “Yes” will make this name and PIN shown on the Uconnect screen.
Page 608 606 MULTIMEDIA Pair A Bluetooth® Streaming Audio Device NOTE: For devices which are not made a favorite, the device priority 1. Press the Media button on the touchscreen to begin. is determined by the order in which it was paired. The latest device paired will have the higher priority.
Page 609 MULTIMEDIA Disconnecting A Phone Or Audio Device 5. Press the Delete Device button on the touchscreen. 1. Press the Phone Settings button on the touchscreen. 6. Press the X button to exit out of the Settings screen. 2. Press the Paired Phones or Paired Audio Devices button Making A Phone Or Audio Device A Favorite on the touchscreen.
Page 610 608 MULTIMEDIA book. Specific Bluetooth® Phones with Phonebook Access Managing Your Favorites Profile may support this feature. There are two ways you can add an entry to your Favorites. See Uconnect website, UconnectPhone.com, for supported 1. After loading the mobile phonebook, press the Favorites phones.
Page 611 MULTIMEDIA Dial By Saying A Number Phone Call Features The following features can be accessed through the Uconnect 1. Push the VR button on your steering wheel to begin. Phone if the feature(s) are available and supported by Blue- 2. After the “Listening” prompt and the following beep, say tooth®...
Page 612 610 MULTIMEDIA • Hold/unhold Recent Calls • Mute/unmute You may browse a list of the most recent of each of the following call types: • Transfer the call to/from the phone • All Calls • Swap two active calls • Incoming Calls •...
Page 613 MULTIMEDIA Answer Or Ignore An Incoming Call — No Call Currently Do Not Disturb In Progress With Do Not Disturb, you can disable notifications from When you receive a call on your mobile phone, the Uconnect incoming calls and texts, allowing you to keep your eyes on Phone will interrupt the vehicle audio system.
Page 614 612 MULTIMEDIA NOTE: Join Calls • Reply with text message is not compatible with iPhones®. When two calls are in progress (one active and one on hold), press the Join Calls button on the Phone main screen to • Auto reply with text message is only available on phones combine all calls into a Conference Call.
Page 615 MULTIMEDIA NOTE: connected mobile phone to the Uconnect Phone or vice The call will remain within the vehicle audio system until the versa, press the Transfer button on the Phone main screen. phone becomes out of range for the Bluetooth® connection. Connect Or Disconnect Link Between The Uconnect Phone It is recommended to press the Transfer button on the touch- And Mobile Phone...
Page 616 614 MULTIMEDIA Performance is maximized under: Phonebook (Mobile and Favorites) name recognition rate is optimized when the entries are not similar. You can say “O” • Low-To-Medium Blower Setting (letter “O”) for “0” (zero). • Low-To-Medium Vehicle Speed Even though international dialing for most number combi- •...
Page 617: Off-Road Pages - If Equipped
MULTIMEDIA Bluetooth® Communication Link Mobile phones have been found to lose connection to the Uconnect Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode. Power-Up After switching the ignition key from OFF to either the ON/ RUN or ACC position, or after a language change, you must...
Page 618: Off-Road Pages Status Bar
616 MULTIMEDIA Off-Road Pages Status Bar The Off-Road Pages Status Bar is located along the bottom of Off-Road Pages and is present in each of the three selectable page options. It provides information for the following items: • Transfer Case Status •...
Page 619: Pitch & Roll
MULTIMEDIA Pitch & Roll Drivetrain The Pitch & Roll page displays the vehicle’s current pitch The Drivetrain page displays information concerning the (angle up and down) and roll (angle side to side) in vehicle’s drivetrain. degrees.The pitch & roll gauge provide a visualization of the The following information is displayed: current vehicle angle.
Page 620: Accessory Gauge
618 MULTIMEDIA sure (Gas Vehicles Only), Transmission Temperature, and Battery Voltage. Drivetrain Menu 2WD/4WD 1 — Steering Angle 2 — Sway Bar Accessory Gauge Menu 2WD/4WD 3 — Front Axle Locker Status 1 — Coolant Temperature 4 — Rear Axle Locker Status 2 —...
Page 621: Steering Wheel Audio Controls
MULTIMEDIA Pushing the center button will make the radio switch STEERING WHEEL AUDIO CONTROLS between the various modes available (AM/FM/SAT/USB/ The remote sound system controls are located on the rear AUX, etc.). surface of the steering wheel. Reach behind the wheel to access the switches.
Page 622: Aux/Usb/Mp3 Control
620 MULTIMEDIA For example, if a device is plugged into the Type A USB port AUX/USB/MP3 CONTROL and another device is plugged into the Type C USB port, a The Media Hub is located on the instrument panel, below the message will appear and allow you to select which device to climate controls.
Page 623 MULTIMEDIA Located inside the center console, a second USB Port allows you to play music from iPod®/MP3 players or USB devices through your vehicle’s sound system. Media Hub 1 — AUX Port 2 — Type C USB Port 3 — Type A USB Port Center Console USB...
Page 624 622 MULTIMEDIA A third and fourth USB port (if equipped) are located behind the center console, above the power inverter. One is a charge only port, and can only charge USB devices. The other USB Port allows you to play music from iPod®/MP3 players or USB devices through your vehicle’s sound system.
Page 625: Radio Operation And Mobile Phones
MULTIMEDIA satisfactorily “clear” by the repositioning of the antenna, it is recommended that the radio volume be turned down or off during mobile phone operation when not using Uconnect (if equipped). Regulatory And Safety Information USA/CANADA Exposure to Radio Frequency Radiation The radiated output power of the internal wireless radio is far below the FCC and IC radio frequency exposure limits.
Page 626 624 MULTIMEDIA you are encouraged to ask for authorization before turning La operación de este equipo está sujeta a las siguientes dos on the wireless radio. condiciones: The following regulatory statement applies to all Radio 1. es posible que este equipo o dispositivo no cause interfer- Frequency (RF) devices equipped in this vehicle: encia perjudicial y This device complies with Part 15 of the FCC Rules and with...
Page 627: Uconnect Voice Recognition Quick Tips
MULTIMEDIA • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and receiver.
Page 628: Get Started
626 MULTIMEDIA Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing instruc- tions. 2. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition.
Page 629: Basic Voice Commands
MULTIMEDIA Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say: • “Cancel” to stop a current voice session • “Help” to hear a list of suggested Voice Commands •...
Page 630: Radio
628 MULTIMEDIA Radio Use your voice to quickly get to the AM, FM or SiriusXM® Satellite Radio stations you would like to hear. (Subscription or included SiriusXM® Satellite Radio trial required). Push the VR button . After the beep, say: •...
Page 631: Media
MULTIMEDIA Media Uconnect offers connections via USB, Bluetooth® and auxil- iary ports (if equipped). Voice operation is only available for connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles). Push the VR button on the steering wheel. After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist/album/song/ genre.
Page 632 630 MULTIMEDIA Uconnect 3 Media Uconnect 4C/4C NAV Media Uconnect 4 Media...
Page 633: Phone
MULTIMEDIA Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illuminated on your touchscreen, your system is ready to make a phone call. You may have to wait for a few more moments to issue a Voice Command for hands-free calling.
Page 634: Voice Text Reply
632 MULTIMEDIA 2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts. PRE-DEFINED VOICE TEXT REPLY RESPONSES Yes. Stuck in traffic. See you later. Start without me. I’ll be late. Okay.
Page 635: Climate
MULTIMEDIA Apple® iPhone® iOS 6 or later supports reading incoming Climate text messages only. To enable this feature on your Apple® Too hot? Too cold? Adjust vehicle temperatures hands-free iPhone®, follow these four simple steps: and keep everyone comfortable while you keep moving ahead.
Page 636 634 MULTIMEDIA Uconnect 4 With 7-inch Display Climate Uconnect 4C/4C NAV With 8.4-Inch Display Climate...
Page 637: Navigation (4C Nav) - If Equipped
MULTIMEDIA Navigation (4C NAV) — If Equipped The Uconnect navigation feature helps you save time and become more productive when the system shows you exactly how to get to where you want to go. 1. To enter a destination, push the VR button on the steering wheel.
Page 638: Siriusxm Guardian™ (4C/4C Nav) - If Equipped
636 MULTIMEDIA Send & Go SiriusXM Guardian™ (4C/4C NAV) — If Equipped Vehicle Finder CAUTION! Some SiriusXM Guardian™ services, including SOS Stolen Vehicle Assistance Call and Roadside Assistance Call will NOT work Remote Vehicle Start** without an operable LTE (voice/data) or 3G or 4G (data) network connection compatible with your device.
Page 639: Vehicle Health Report/Alert (4C/4C Nav)
MULTIMEDIA 3. Select “Customer Care” to speak with a SiriusXM Mobile App (4C/4C NAV) Guardian™ Customer Care agent who will activate You’re only a few steps away from a connected car experi- services in your vehicle, or select “Enter Email” to acti- ence.
Page 640: Siriusxm® Travel Link (4C Nav)
638 MULTIMEDIA To use the Uconnect Mobile App: SiriusXM® Travel Link (4C NAV) 1. Once you have registered your SiriusXM Guardian™ Need to find a gas station, view local movie listings, check a services, download the Uconnect App to your mobile sports score or the 5-day weather forecast? SiriusXM®...
Page 641: Siri® Eyes Free
MULTIMEDIA system is designed to keep your eyes on the road and your hands on the wheel by letting Siri help you perform useful tasks. To begin, ensure Siri is enabled on your iPhone®. Pair your Siri-enabled device to your Uconnect System. Push and hold, then release the Uconnect Voice Recognition (VR) button on the steering wheel.
Page 642: Using Do Not Disturb
640 MULTIMEDIA Do Not Disturb can automatically reply with a text message, a call, or both, when declining an incoming call and send it to voicemail. Automatic reply messages can be: • “I am driving right now, I will get back to you shortly”. •...
Page 643: Android Auto™ - If Equipped
MULTIMEDIA • Text Messages Android Auto™ — If Equipped • Additional Apps NOTE: Feature availability depends on your carrier and mobile phone manufacturer. Some Android Auto™ features may or may not be available in every region and/or language. Android Auto™ allows you to use your voice to interact with Android’s™...
Page 644: Apple Carplay® - If Equipped
642 MULTIMEDIA NOTE: Requires compatible smartphone running Android™ 5.0 (Lollipop) or higher and download app on Google Play. Android™, Android Auto™, and Google Play are trade- marks of Google Inc. Apple CarPlay® — If Equipped NOTE: Feature availability depends on your carrier and mobile phone manufacturer.
Page 645 MULTIMEDIA CarPlay®. Push and hold the VR button on the steering wheel, or press and hold the Home button within Apple CarPlay®, to activate Siri, which recognizes natural voice commands to use a list of your iPhone’s® features: • Phone •...
Page 646: General Information
644 MULTIMEDIA La operación de este equipo está sujeta a las siguientes dos General Information condiciones: The following regulatory statement applies to all Radio 1. es posible que este equipo o dispositivo no cause interfer- Frequency (RF) devices equipped in this vehicle: encia perjudicial y This device complies with Part 15 of the FCC Rules and with 2.
Page 647 MULTIMEDIA Uconnect System Support: SiriusXM Guardian™ services support: • US residents visit www.DriveUconnect.com or call: • US residents visit www.siriusxm.com/guardian or call: 1-877-855-8400 (24 hours a day 7 days a week) 1-844-796-4827 • Canadian residents visit www.DriveUconnect.ca or call: • Canadian residents visit www.siriusxm.ca/guardian 1-800-465-2001 (English) or 1-800-387-9983 (French) call: 1-877-324-9091...
Page 648: Customer Assistance
CUSTOMER ASSISTANCE daily charge. If you need a rental, it is advisable to make SUGGESTIONS FOR OBTAINING SERVICE FOR these arrangements when you call for an appointment. YOUR VEHICLE IF YOU NEED ASSISTANCE Prepare For The Appointment The manufacturer and its authorized dealer are vitally inter- All work to be performed may not be covered by the ested in your satisfaction.
Page 649: Fca Us Llc Customer Center
CUSTOMER ASSISTANCE This is why you should always talk to an authorized dealer FCA Canada Inc. Customer Center service manager first. Most matters can be resolved with this P.O. Box 1621 process. • If for some reason you are still not satisfied, talk to the Windsor, Ontario N9A 4H6 general manager or owner of the authorized dealer.
Page 650: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
648 CUSTOMER ASSISTANCE service contract, call the manufacturer's Service Contract Customer Assistance For The Hearing Or Speech National Customer Hotline at 1-800-521-9922 (Canadian resi- Impaired (TDD/TTY) dents, call (800) 465-2001 English / (800) 387-9983 French). To assist customers who have hearing difficulties, the manu- The manufacturer will not stand behind any service contract facturer has installed special TDD (Telecommunication that is not the manufacturer's service contract.
Page 651: Warranty Information
CUSTOMER ASSISTANCE Mopar has a wide range of accessories to fit your active life- WARNING! style. These Accessories were designed by the same engi- Engine exhaust (internal combustion engines only), neers that created your vehicle, to make it truly yours. From some of its constituents, and certain vehicle components winches to axles, from suspension to the LED off–road lights, contain, or emit, chemicals known to the State of...
Page 652: In Canada
650 CUSTOMER ASSISTANCE To contact NHTSA, you may call the Vehicle Safety PUBLICATION ORDER FORMS Hotline toll free at 1-888-327-4236 (TTY: 1-800-424-9153); To order the following manuals, you may use either the or go to http://www.safercar.gov; or write to: Adminis- website or the phone numbers listed below.
Page 653 CUSTOMER ASSISTANCE Owner's Manuals Call toll free at: • 1-800-890-4038 (U.S.) These Owner's Manuals have been prepared with the assis- tance of service and engineering specialists to acquaint you • 1-800-387-1143 (Canada) with specific FCA US LLC vehicles. Included are starting, operating, emergency and maintenance procedures as well as specifications, capabilities and safety tips.
Page 654 INDEX Air Conditioning Filter.............84, 451 About Your Brakes ..............501 Air Conditioning System ............83 Adaptive Cruise Control (ACC) (Cruise Control) .....321 Air Conditioning, Operating Tips ..........83 Adding Engine Coolant (Antifreeze) ........459 Air Filter ...................446 Adding Fuel ................360 Air Pressure Additives, Fuel ................503 Tires..................477 Air Bag Alarm...
Page 655 Automatic Temperature Control (ATC) ........83 Connecting To A Particular Mobile Phone Or Audio Automatic Transmission............294 Device After Pairing............606 Adding Fluid ...............466 Bluetooth Mode ...............589 Autostick ................300 Body Mechanism Lubrication ..........453 Fluid And Filter Change ............466 B-Pillar Location..............472 Fluid Change................466 Brake Assist System ..............197 Fluid Level Check ............465, 466 Brake Control System .............196...
Page 656 Carpeting..................495 Connector Cellular Phone .................623 UCI ..................620 Center High Mounted Stop Light.........399 Universal Consumer Interface (UCI)........620 Certification Label..............362 Console ..................143 Chains, Tire................486 Floor ..................143 Changing A Flat Tire ..............466 Contract, Service..............648 Chart, Tire Sizing ..............468 Cooling Pressure Cap (Radiator Cap)........460 Checking Your Vehicle For Safety........276 Cooling System................457 Checks, Safety................276...
Page 657 Delay (Intermittent) Wipers ............70 Electric Remote Mirrors ............63 Dimmer Switch Electrical Outlet, Auxiliary (Power Outlet)......149 Headlight................65 Electrical Power Outlets............149 Dipsticks Electronic Speed Control (Cruise Control)......318 Oil (Engine) ................442 Electronic Stability Control (ESC).........198 Disable Vehicle Towing ............432 Emergency Disposal In Case Of ................388 Antifreeze (Engine Coolant) ..........460 SOS Emergency Call ............388 Disturb..................611...
Page 658 Oil ..................444, 507 Flash-To-Pass ................65 Oil Filler Cap................441 Flooded Engine Starting............285 Oil Filter................446 Fluid Capacities ...............507 Oil Selection ..............444, 507 Fluid Leaks................280 Oil Synthetic.................445 Fluid Level Overheating .................428 Manual Transmission ............464 Starting................281, 282 Fluid Level Checks..............463 Engine Oil Viscosity ...............445 Brake..................462 Engine Oil Viscosity Chart ............445 Engine Oil................442...
Page 659 Fuel....................503 Adding..................360 Hard Top ..................98 Additives ................503 Hazard Warning Flashers ............388 Clean Air ................503 Head Restraints .................56 Ethanol..................504 Headlights Filler Cap (Gas Cap) ............360 Automatic ................65 Gasoline ................503 Bulb Replacement..............396 Materials Added..............503 Cleaning................491 Methanol................504 High Beam/Low Beam Select Switch ........65 Octane Rating ..............503, 507 Lights On Reminder..............67 Requirements...............507...
Page 660 In Vehicle Help Keyless Enter-N-Go ..............36 Vehicle User Guide ...............16 Passive Entry................36 Inside Rearview Mirror............61 Keys.....................18 Instrument Panel Lens Cleaning ..........499 Replacement..............21, 31 Integrated Power Module (Fuses) ........400 Interior And Instrument Lights ..........68 Lane Change Assist..............67 Interior Appearance Care ............495 Lap/Shoulder Belts..............231 Interior Lights................68 Latches ..................280...
Page 661 Interior ..................68 Manual Lights On Reminder .............67 Park Release .................429 Passing ..................65 Service ...................650 Rear Servicing..............398 Manual Transmission .............289, 464 Rear Tail Lamps..............398 Fluid Level Check..............464 Service...................396 Lubricant Selection............464, 509 Side Marker................398 Shift Speeds ................291 Tire Pressure Monitoring (TPMS)........219 Methanol...................504 Traction Control ..............202 Mirrors ..................61 Turn Signal................280...
Page 662 Oil Filter, Selection..............446 Door Locks ................35 Oil, Engine ...............444, 507 Inverter..................150 Capacity................507 Mirrors ..................63 Change Interval ..............444 Steering .................309 Dipstick.................442 Windows.................85 Disposal ................445 Power Steering Fluid ..............509 Filter ................446, 507 Pregnant Women And Seat Belts..........236 Filter Disposal..............445 Pretensioners Identification Logo..............445 Seat Belts................237 Materials Added To............
Page 663 Remote Control Starting System..............26 Safety Checks Inside Vehicle..........277 Remote Keyless Entry Safety Checks Outside Vehicle..........280 Arm The Alarm ..............32 Safety Defects, Reporting ............649 Disarm The Alarm ..............33 Safety Information, Tire ............466 Programming Additional Key Fobs ........21 Safety Tips ................276 Remote Sound System (Radio) Control .......619 Safety, Exhaust Gas..............277 Remote Starting Schedule, Maintenance............436...
Page 664 Reminder ................229 Transfer Case, Shifting Out Of Transfer Case Seat Belt Extender ...............236 Neutral (N) ................375 Seat Belt Pretensioner ............237 Shoulder Belts ................231 Untwisting Procedure ............234 Side Step Removal ..............377 Seat Belts Maintenance............498 Signals, Turn ............280, 397, 398 Seats ....................49 Siri....................639 Adjustment................49 Sirius Satellite Radio ...............577...
Page 665 Speed Control Store Radio Presets ..............576 Accel/Decel................320 Storing Your Vehicle...............489 Accel/Decel (ACC Only) ........... 327 Stuck, Freeing ................430 Cancel..................321 Sway Bar Disconnect Resume .................321 Electronic ................306 Speed Control (Cruise Control) ........318, 321 Sway Control, Trailer .............207 Starting ................281, 282 Synthetic Engine Oil ...............445 Automatic Transmission ............281 System, Remote Starting ............26 Button..................23...
Page 666 Life Of Tires .................480 Weight...................366 Load Capacity..............472, 473 Towing Behind A Motorhome ..........373 Pressure Monitoring System (TPMS).......219 Trac-Lok Quality Grading ..............488 Rear Axle ................305 Radial ..................478 Traction Control ..............207 Replacement.................481 Trailer Sway Control (TSC) ...........207 Rotation ................487 Trailer Towing .................363 Safety................466, 476 Cooling System Tips ............372 Sizes..................
Page 667 Disconnecting A Phone Or Audio Device .......607 UCI Connector.................620 Far End Audio Performance..........614 Uconnect Help Command ..............603 Advanced Phone Connectivity .........613 Join Calls................612 Phone Call Features ............609 Making A Phone Or Audio Device A Favorite....607 Things You Should Know About Your Uconnect Making A Second Call While Current Call Is In Phone ..................613 Progress ................612...
Page 668 Uconnect Settings Customer Programmable Features....... 29, 36 Warnings And Cautions ............15 Passive Entry Programming..........36 Warnings, Roll Over ..............14 Uniform Tire Quality Grades ..........488 Warranty Information ............649 Universal Consumer Interface (UCI) Connector....620 Washers, Windshield..............442 Untwisting Procedure, Seat Belt ...........234 Washing Vehicle..............492 Wheel And Wheel Tire Care..........485 Vanity Mirrors................64 Wheel And Wheel Tire Trim ..........485...
Page 669 Mobile radio equipment with output power greater than INSTALLATION OF RADIO TRANSMITTING normal may require special precautions. EQUIPMENT Special design considerations are incorporated into this All installations should be checked for possible interference between the communications equipment vehicle’s electronic system to provide immunity to radio and the vehicle’s electronic systems.
Page 670 20_JT_OM_EN_USC ©2019 FCA US LLC. All Rights Reserved. Jeep is a registered trademark of FCA US LLC. All-New Gladiator ©2019 FCA US LLC. Tous droits réservés. Jeep est une marque déposée de FCA US LLC. First Edition V3 App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Save PDF