Table of Contents
Advertisement
78
GETTING TO KNOW YOUR VEHICLE
NOTE:
The left side panel must be removed before
removing the right side panel.
1. Fold down the sun visor against the
windshield.
2. Turn the three L-shaped locks on the left
side panel (one at the front, the rear, and
outside), unlocking them from the roof.
Step Two
1 — Front Panel Lock
2 — Outside Panel Lock
3 — Rear Panel Lock
3. Unlatch the left side header panel latch
located at the top of the windshield.
Step Three
1 — Header Panel Latched
2 — Header Panel Unlatched
4. Remove the left side panel.
5. Repeat the steps above to remove the right
side panel.
Hard Top Panel(s) Storage Bag — If
Equipped
The Freedom Top panels storage bag allows you
to store your hard top panels. The storage bag
contains two compartments.
Lay the bag for the panels down so the loops
and hooks are facing upward. Unzip the bag and
fold back the outer flap.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the panels bag.
There is a pouch located on the front of the
bag to store the provided hard top edge
protectors that are used when the hard top is
not installed on the vehicle.
1. Insert the left side hard top panel into the
bag with the latches facing upward.
2. Unfold the black panel divider (ensure the
divider is laying flat).
Advertisement
Table of Contents
