Table of Contents
Advertisement
448
MULTIMEDIA
Jeep Wireless Speaker Location
Wireless Speaker Location
The Jeep wireless speaker is located behind the
right rear passenger seat. In order to access the
Jeep wireless speaker, the seat will need to be
folded down or tilted forward.
To remove the Jeep wireless speaker, pull on
the strap located on top of the mount for the
speaker. When the strap is pulled, the Jeep
wireless speaker can easily be lifted from the
mount.
When placing the Jeep wireless speaker back in
the mount, simply put the speaker back in the
mount and push/rotate forward on the front of
the speaker until the speaker locks in place.
Charging External Devices
The Jeep wireless speaker is capable of
charging most USB enabled smartphones and
tablets using the type A USB charging port.
To use the external charging feature:
1. Turn the speaker on.
2. Plug the USB power cable into the type A
USB charging port on the back of the
speaker.
3. Insert the other end of the USB power cable
into your device to immediately begin
charging.
Charging The Speaker
Before using the Jeep wireless speaker for the
first time, fully charge your Jeep wireless
speaker until the battery indicator light stays
solid green.
The Jeep wireless speaker in-vehicle dock is the
most ideal way to fully charge the speaker with
the ignition in ON/RUN or ACC. The speaker can
also be charged with a power adapter.
NOTE:
Jeep wireless speaker will not charge within
vehicle dock while the ignition is fully off.
To charge the Jeep wireless speaker with a
power adapter, insert the power adapter into a
wall outlet. Next, plug the power adapter into
the Jeep wireless speaker charging port on the
back of the speaker.
NOTE:
Power adapter needed for the Jeep wireless
speaker has to have a range of 14VDC to
16.5VDC, with a minimum of 2.7A and a barrel
connector dimension of 5.5mm by 2.5mm.
Power adapter is not included.
Monitoring Battery Level Status LED
Light
Red
40% or lower
Yellow
40% to 70%
Green
70% to 100%
NOTE:
The Jeep wireless speaker must be turned on to
observe the Battery Status LED.
Advertisement
Table of Contents
