Jeep GLADIATOR 2020 Owner's Manual page 31

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

WARNING!
All occupants must wear seat belts during
off-road operation with doors removed.
Refer to "Off-Road Driving Tips" in "Starting
And Operating" for further information.
Do not store detached doors inside of the
vehicle, as they may cause personal injury
in the event of an accident.
Assistance to remove doors may by
required due to the weight of the door to
avoid personal injury.
CAUTION!
Hinge pins can break if overtightened during
door reinstall (Max Torque: 5.88 ft· l b / 8 N·m).
Refer to "Off-Road Driving Tips" in "Starting
And Operating" for further information.
Do not over-tighten Torx fasteners. Damage
to the vehicle's parts will occur.
Outside rearview mirrors are
mounted on the doors. If you choose
to remove the doors, see an
authorized dealer for a replacement
cowl-mounted outside mirror. Federal law
requires outside mirrors on vehicles for on-road
use.
NOTE:
When front doors are removed, the message
"Blind Spot Alert Temporarily Unavailable" will
display in the instrument cluster display. Power
Mirrors and Power Door Locks will also be
unavailable.
To remove the front doors, proceed as follows:
1. Roll down the glass window to prevent any
damage.
2. Remove the hinge pin nut from the upper
and lower outside hinges (using a #T50 Torx
head driver).
GETTING TO KNOW YOUR VEHICLE
NOTE:
The hinge pin nuts can be stowed in the
Fastener Bin located under the rear seat.
Hinge Pin Nut
29
2

Advertisement

Table of Contents
loading

Table of Contents