Jeep GLADIATOR 2020 Owner's Manual page 100

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

98
GETTING TO KNOW YOUR VEHICLE
The Locking Storage Bin can be removed by
unfastening the four bolts that attach the bin to
the vehicle floor using the provided #40 Torx
head driver and ratchet. The bottom of the
storage bin has rubber mats that need to be
removed to access the four bolts. These bolts
can then be stored in the fastener bin below the
rear seat.
Under Seat Storage (Open View)
1 — Key Locks
2 — Removable Bolts
3 — Handle
Your Locking Storage bin also has a front
handle that makes it easier to carry and pull out
from the floor of the vehicle when the four bolts
that attach the bin to the floor are removed.
Locking Storage Bin (Closed View)
Rear Behind Seat Storage — If Equipped
The rear wall storage bin is located behind the
right rear seat.
Rear Wall Storage Bin
Rear Wall Storage Bin
1 — Rear Wall Storage Bin
2 — Pull Strap
To access the storage bin, pull upward on the
pull strap located on the upper outboard side of
the right rear seat, and fold the seatback
forward.
NOTE:
The rear seatback can be locked using the
vehicle key to secure items in the rear wall
storage bin. The seat lock is located on the
upper outboard side of each seatback. Both
seatbacks should be locked to limit access to
items behind seat.

Advertisement

Table of Contents
loading

Table of Contents