Turn Signals; Lane Change Assist - If Equipped; Lights-On Reminder; Bed Lights - If Equipped - Jeep GLADIATOR 2020 Owner's Manual

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

46
GETTING TO KNOW YOUR VEHICLE
T
S
URN
IGNALS
Move the multifunction lever up or down and
the arrows on each side of the instrument
cluster flash to show proper operation of the
front and rear turn signal lights.
NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defec-
tive outside light bulb. If an indicator fails to
light when the lever is moved, it would suggest
that the indicator bulb is defective.
L
C
A
— I
ANE
HANGE
SSIST
The Lane Change Assist feature will flash the
turn signal (left or right) three times to indicate
to other drivers that you are changing lanes. Tap
the multifunction lever up or down once,
without moving beyond the detent, and the turn
signal (right or left) will flash three times then
automatically turn off.
L
-O
R
IGHTS
N
EMINDER
The Lights-On Reminder feature will identify if
the headlights or parking lights are left on after
the ignition is placed in the OFF position. A
chime will sound when the driver's door is
opened reminding the operator to turn the
headlight switch off.
E
B
L
F
QUIPPED
ED
IGHTS
The bed lights will illuminate the bed and cargo
area. Bed lights are turned on by pushing the
bed light switch located on the lower half of the
headlight switch.
A telltale will illuminate in the instrument cluster
display when these lights are on. Pushing the
switch a second time will turn the lights off.
The bed lights will turn on for approximately
60 seconds when a key fob unlock button is
pushed, as part of the Illuminated Entry feature.
— I
E
F
QUIPPED
Bed Light Switch

Advertisement

Table of Contents
loading

Table of Contents