Bulb Replacement - Jeep GLADIATOR 2020 Owner's Manual

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

Bulb Name
Premium Fog Lamps
Rear Premium LED Tail Lamps
Rear Base Tail Lamp Stop/Tail/Turn Bulb
Rear Base Tail Lamp Backup Bulb
Rear Base Tail Lamp Side Marker
Center High Mounted Stop Lamp
License Lamp
NOTE:
Numbers refer to commercial bulb types that can be purchased from an authorized dealer. If a bulb needs to be replaced, visit an authorized dealer
or refer to the applicable Service Manual.
B
R
ULB
EPLACEMENT
NOTE:
Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as
atmospheric conditions occur to allow the
condensation to change back into a vapor.
Turning the lamps on will usually accelerate the
clearing process.
Exterior Bulbs
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
3157
7440
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
LED – (Serviced at an Authorized Dealer)
Halogen Headlamps
NOTE:
We advise referring to an authorized dealer for
service.
1. Open hood and support using prop rod.
2. Remove the front grille. Turn the retainers
along the top a quarter turn counter-
clockwise and remove.
3. Pull the bottom of the grille away, starting at
one side and working toward the other.
IN CASE OF EMERGENCY
Bulb Number
4. Remove the three screws holding the
headlamp to the vehicle.
5. Remove lamp from the vehicle.
6. Remove the lamp from the collar.
7. Grasp the bulb and turn a quarter turn
counterclockwise.
8. Pull the bulb from the housing.
9. Push connector locking tab to the unlock
position.
283
6

Advertisement

Table of Contents
loading

Table of Contents