Table of Contents
Advertisement
Rear Wall Netting
The rear wall netting can be accessed the same
way as the rear wall storage bin.
Rear Wall Netting
Fastener Bin
Your vehicle is equipped with a Fastener Bin
used to store the fasteners for the doors,
windshield, and hard top (if equipped) while not
in use. The Fastener Bin is located behind the
rear seat storage bin. The Fastener Bin contains
foam inserts for each of the fasteners; they are
removable.
To remove the Fastener Bin:
1. Remove the lid and foam inserts from the
Fastener Bin.
2. Remove the three nuts from the bottom of
the Fastener Bin.
NOTE:
The soft top fasteners do not go in the Fastener
Bin.
Fastener Bin
1 — Door Removal
2 — Under Seat Storage Bin Removal
3 — Hard Top Removal
4 — Folding Windshield
GETTING TO KNOW YOUR VEHICLE
E
P
O
LECTRICAL
OWER
UTLETS
There is a 12 V (13 A) auxiliary power outlet that
can provide power for accessories designed for
use with the standard power outlet adapters.
The front power outlet is located in the center of
the instrument panel below the climate
controls, and is powered from the ignition
switch. Power is available when the ignition
switch is in the ON or ACC position.
Front Power Outlet
99
2
Advertisement
Table of Contents
