MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
Parameters
External K delay: allows the operator to set the time window within which the external
feedback signal (Fbk_K) is to be monitored (according to output conditions).
Enable Clear: if checked enables input Clear.
With this input at 1 it is possible to clear the error when the fault has been repaired. Using
this input it is no longer necessary to reset MOSAIC M1S/MOSAIC M1S COM or turn off the
system.
Figure 124 – OSSD EDM operator scheme example
8540780 • 25/01/2023 • Rev.43
249