Division values (A)
(A) < Threshold value
(A) <= Threshold value + hysteresis
(A) > Threshold value + hysteresis
(A) > Threshold value
(A) < Threshold value
Samples per second
Lets you select the number of samples per second of the analog to digital converter.
The lower the value, the less the reading is susceptible to noise.
The higher the value, the shorter the response time.
The Samples per second values 50 and 60 enhance the AC power line filter rejection.
Current limits / voltage
194
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
Current state of threshold comparator Next state of threshold comparator
UNDER THRESHOLD
UNDER THRESHOLD
UNDER THRESHOLD
OVER THRESHOLD
OVER THRESHOLD
UNDER THRESHOLD
UNDER THRESHOLD
OVER THRESHOLD
OVER THRESHOLD
UNDER THRESHOLD
8540780 • 25/01/2023 • Rev.43