Reer MOSAIC M1 Installation And Use Manual page 192

(A) < Low threshold value + hysteresis
(A) > High threshold
(A) >= High threshold value - hysteresis
(A) <= Low threshold value
(A) < High threshold value - hysteresis
(A) > Low threshold value
(A) < High threshold value
(A) > Low threshold value + hysteresis
Division analysis: Enable threshold
If you activate the option Enable threshold, the output Out is added to the
graphical representation of the function block and a number of additional
parameters are displayed.
The following parameters are provided to define the behavior of the Threshold
comparator:
• Threshold: is the value of the threshold.
• Hysteresis: is the hysteresis value
The following figure and table exemplify the states of the Enable threshold:
192
Division value (A)
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
Current state of window Next state of window
comparator
OUT OF WINDOW OUT OF WINDOW
OUT OF WINDOW OUT OF WINDOW
OUT OF WINDOW OUT OF WINDOW
OUT OF WINDOW OUT OF WINDOW
OUT OF WINDOW
OUT OF WINDOW
IN WINDOW
IN WINDOW
comparator
IN WINDOW
IN WINDOW
IN WINDOW
IN WINDOW
8540780 • 25/01/2023 • Rev.43