Analog Output
If this option is selected, the raw values of the measurements are available within
MSD by using the Graphical Monitor.
This is graphically represented on the function block by a light green square and
the label Analog.
Enable Error Out
If selected, provides an output to indicate that an error has been detected by the
function block. This is graphically represented on the function block by a dark green
square and the label Error.
Math Err
The output Math Err provides the state of the division:
Division by 0
Disconnected cable diagnosis detected
Output overload detected
Input overload detected
Mismatch detected (only with redundant sensors)
Normal operation
196
Anomaly
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
"Math Err" Value
1 (TRUE)
1 (TRUE)
1 (TRUE)
1 (TRUE)
1 (TRUE)
0 (FALSE)
8540780 • 25/01/2023 • Rev.43